Evaluation of high-performance liquid chromatography column retentivity using macromolecular probes. II. Silanophilic interactivity traced by highly polar polymers

A new method of HPLC column retentivity testing utilizes polymeric probes instead of conventional sets of low molar mass substances. The procedure allows at least semiquantitative, separate and independent evaluation of adsorption and partition properties of column packings. In this present work, the method is applied for comparison of the polar interactivities of selected silica gel C18 HPLC columns. It is shown that free silanols which remained on the surface of the end-capped silica C18 column packings are accessible for interaction with highly polar macromolecules. High molar mass polymeric test probes are adsorbed on the surface silanols and their retention volumes increase. As result, deviations from regular size-exclusion chromatographic (SEC) behavior are observed. The extent of retention volume changes depends on both the nature of polymer probes and on column packing type. Adsorption of macromolecules can be suppressed by addition of a highly polar substance to the mobile phase. The amount of polar additive which is needed to attain regular SEC elution of the polymer probe depends on the column packing type and can be used as a characteristic of silanophilic column interactivity. Courses of dependences of retention volumes on sizes of macromolecules indicate the presence of "U-turn" adsorption which allows two and more silanols situated among C18 groups to be occupied simultaneously with the same macromolecule.     

Graphene‐Based Composite with γ‐Fe2O3 Nanoparticle for the High‐Performance Removal of Endocrine‐Disrupting Compounds from Water

Graphene is a 2D sp²‐hybridized carbon sheet and an ideal material for the adsorption‐based separation of organic pollutants. However, such potential applications of graphene are largely limited, owing to their poor solubility and extensive aggregation properties through graphene? graphene interactions. Herein, we report the synthesis of graphene‐based composites with γ‐Fe₂O₃ nanoparticle for the high‐performance removal of endocrine‐disrupting compounds (EDC) from water. The γ‐Fe₂O₃ nanoparticles partially inhibit these graphene? graphene interactions and offer water dispersibility of the composite without compromising much of the high surface area of graphene. In their dispersed form, the graphene component offers the efficient adsorption of EDC, whilst the magnetic iron‐oxide component offers easier magnetic separation of adsorbed EDC.     

The preparation of the 239Np tracer from 243Am and the purification of the stock solution

The present work describes preparation of ²³⁹Np tracer from ²⁴³Am stock solution and the purification of this solution from ferric cation. The method of the preparation of tracer involves stabilization of Np(IV) by ascorbic acid and ferric nitrate, separation of ²³⁹Np from ²⁴³Am by extraction chromatography and determination of recoveries of ²³⁹Np by means of gamma spectroscopy. We used the commercially available sorbents TEVA^®Resin for the ²³⁹Np preparation and DGA Resin for ²⁴³Am purification. All sorbents were purchased from Eichrom Industries, Inc. The first eluate from the column can be stored for a future preparation of the tracer and fraction with ²³⁹Np will be used to monitor radiochemical yield of ²³⁷Np.     

A dispersive liquid-liquid microextraction procedure for determination of boron in water after ultrasound-assisted conversion to tetrafluoroborate

A novel, simple and green procedure is presented for the determination of boron. The method is based on ultrasound-assisted conversion of boron to tetrafluoroborate anion and the formation of an ion pair between BF₄⁻ and Astra Phloxine reagent (R), followed by dispersive liquid-liquid microextraction of the ion pair formed and subsequent UV-vis spectrophotometric detection. The conversion of boron to tetrafluoroborate anion is performed in an acidic medium of 0.9 mol L⁻¹ H₂SO₄ in the presence of 0.1 mol L⁻¹ F^- by means of 10 min of ultrasonication. The extraction of the ion pair formed between BF₄⁻ and R (1 × 10⁻⁴ mol L⁻¹ R) is carried out by dispersive liquid-liquid microextraction using 0.5 mL of amyl acetate (as extraction solvent), tetrachloromethane (as auxiliary solvent) and acetonitrile (as dispersive solvent) in a ratio of 1:1:2. The absorbance of the coloured extracts obeys Beer's law in the range 0.22-18.7 mg L⁻¹ of B(III) at 553 nm wavelength. The limit of detection calculated from a blank test (n = 10) based on 3 s is 0.015 mg L⁻¹ of B(III). The method was applied to the determination of boron in mineral waters.     

New solvent systems for thin-layer chromatographic determination of nine biogenic amines in fish and squid

Different solvent systems were evaluated for their ability to separate biogenic amines by thin-layer chromatography (TLC). Dansyl derivatives of agmatine, putrescine, tryptamine, cadaverine, spermidine, histamine, spermine, tyramine and beta-phenylethylamine were separated using the solvent system chloroform-diethyl ether-triethylamine (6:4:1), followed by chloroform-triethylamine (6:1). After separation dansyl amines were quantified by fluorescence densitometry at 330 nm. Correlation coefficients of linear regressions were higher than 0.99 for all amines, except for agmatine (0.976). Detection limits were 10ng for tryptamine, tyramine, histamine and beta-phenylethylamine, and 5 ng for the other amines. The overall repeatability of the chromatography was 1.82% when including agmatine and barely 1.02% for the other amines. The accuracy ranged from 105.97% (agmatine) to 49.92% (tryptamine). This thin-layer chromatography method was found to be an effective and precise analytical procedure to separate and determine biogenic amines. Its main advantages compared to previous procedures are that it uses less harmful solvent (diethyl ether instead of benzene) and can separate a larger group of biogenic amines.     

The unambiguous synthesis and NMR assignment of 4-alkoxy and 3-alkylquinazolines

Contrary to a number of reports, alkylations of the privileged 3,4-dihydroquinazoline scaffold provide N3-alkylated products, and not 4-alkoxyquinazolines. To correctly assign the structure, ¹³C NMR shifts of the –Z–CH_n– (Z=O, N) fragment are necessary; resonances in the 45–55 ppm range are indicative of N3-alkylation. Treatment of 3,4-dihydroquinazoline-4-one with p-TsCl afforded the N3-tosylated compound, whose reaction with an amine yielded the corresponding N3-alkyl derivative. A mechanism corroborated by ¹⁵N-labeling involving pyrimidine ring opening and recyclisation is proposed. Finally, the unambiguous preparation of 4-alkoxyquinazolines is described via treatment of 3,4-dihydroquinazoline-4-ones with PCl₅ followed by an alkoxide.     

Recognition of anions and monocarboxylic acids by a fluorescent guanidine-based receptor

A guanidine-based fluorescent receptor has been synthesised to study its binding behaviour towards anions (F^? , Cl^? , Br^? , I^?  and AcO^? ). The two donor N–H bonds of the receptor do not point in the same direction; rather, one N–H bond is intramolecularly hydrogen-bonded with the carbonyl oxygen atom. The nature of the donor–acceptor (DA) arrangement induces moderate binding properties. The binding behaviour towards monocarboxylic acids (benzoic acid and phenylacetic acid) is also compared. The binding behaviour of receptor 1 towards the F^?  anion is higher among the anions studied, whereas in the case of monocarboxylic acid, the binding constant with phenylacetic acid is higher than benzoic acid.     

Rapid analysis of caffeine in various coffee samples employing direct analysis in real-time ionization–high-resolution mass spectrometry

The development and use of a fast method employing a direct analysis in real time (DART) ion source coupled to high-resolution time-of-flight mass spectrometry (TOFMS) for the quantitative analysis of caffeine in various coffee samples has been demonstrated in this study. A simple sample extraction procedure employing hot water was followed by direct, high-throughput (<1 min per run) examination of the extracts spread on a glass rod under optimized conditions of ambient mass spectrometry, without any prior chromatographic separation. For quantification of caffeine using DART-TOFMS, an external calibration was used. Isotopically labeled caffeine was used to compensate for the variations of the ion intensities of caffeine signal. Recoveries of the DART-TOFMS method were 97% for instant coffee at the spiking levels of 20 and 60 mg/g, respectively, while for roasted ground coffee, the obtained values were 106% and 107% at the spiking levels of 10 and 30 mg/g, respectively. The repeatability of the whole analytical procedure (expressed as relative standard deviation, RSD, %) was <5% for all tested spiking levels and matrices. Since the linearity range of the method was relatively narrow (two orders of magnitude), an optimization of sample dilution prior the DART-TOFMS measurement to avoid saturation of the detector was needed.     

A miniaturized and integrated gel post platform for multiparameter PCR detection of herpes simplex viruses from raw genital swabs

Herpes simplex virus (HSV) is one of the most prevalent viruses, with acute and recurrent infections in humans. The current gold standard for the diagnosis of HSV is viral culture which takes 2-14 days and has low sensitivity. In contrast, DNA amplification by polymerase chain reaction (PCR) can be performed within 1-2 h. We here describe a multiparameter PCR assay to simultaneously detect HSV-1 and HSV-2 DNA templates, together with integrated positive and negative controls, with product detection by melting curve analysis (MCA), in an array of semi-solid polyacrylamide gel posts. Each gel post is 0.67 μL in volume, and polymerized with all the components required for PCR. Both PCR and MCA can currently be performed in one hour and 20 min. Unprocessed genital swabs collected in universal transport medium were directly added to the reagents before or after polymerization, diffusing from atop the gel posts. The gel post platform detects HSV templates in as little as 2.5 nL of raw sample. In this study, 45 genital swab specimens were tested blindly as a preliminary validation of this platform. The concordance of PCR on gel posts with conventional PCR was 91%. The primer sequestration method introduced here (wherein different primers are placed in different sets of posts) enables the simultaneous detection of multiple pathogens for the same sample, together with positive and negative controls, on a single chip. This platform accepts unprocessed samples and is readily adaptable to detection of multiple different pathogens or biomarkers for point-of-care diagnostics.     

Glutathione modified CdTe quantum dots as a label for studying DNA interactions with platinum based cytostatics

Cisplatin, carboplatin, and oxaliplatin represent three generations of platinum based drugs applied successfully for cancer treatment. As a consequence of the employment of platinum based cytostatics in the cancer treatment, it became necessary to study the mechanism of their action. Current accepted opinion is the formation of Pt‐DNA adducts, but the mechanism of their formation is still unclear. Nanomaterials, as a progressively developing branch, can offer a tool for studying the interactions of these drugs with DNA. In this study, fluorescent CdTe quantum dots (QDs, λ_em = 525 nm) were employed to investigate the interactions of platinum cytostatics (cisplatin, carboplatin, and oxaliplatin) with DNA fragment (500 bp, c = 25 μg/mL). Primarily, the fluorescent behavior of QDs in the presence of platinum cytostatics was monitored and major differences in the interaction of QDs with tested drugs were observed. It was found that the presence of carboplatin (c = 0.25 mg/mL) had no significant influence on QDs fluorescence; however cisplatin and oxaliplatin quenched the fluorescence significantly (average decrease of 20%) at the same concentration. Subsequently, the amount of platinum incorporated in DNA was determined by QDs fluorescence quenching. Best results were reached using oxaliplatin (9.4% quenching). Linear trend (R² = 0.9811) was observed for DNA platinated by three different concentrations of oxaliplatin (0.250, 0.125, and 0.063 mg/mL). Correlation with differential pulse voltammetric measurements provided linear trend (R² = 0.9511). As a conclusion, especially in the case of oxaliplatin‐DNA adducts, the quenching was the most significant compared to cisplatin and nonquenching carboplatin.