Sandwich structures at oil-water interfaces under alkaline conditions

Equilibrium liquid crystal (LC) layer on an interface between crude oils and water was observed at high pH. This layer is composed mainly of sodium naphthenates produced in situ at the water/oil interface. Transient LC layer was also evolved at the interface of aqueous phase of sodium hydroxide solutions and oleic phase of naphthenic acid (NA) solutions as result of a chemical reaction between NaOH and NA. This chemical reaction causes transport process resulting in a disturbance of the interface. Optical observation of this interface disturbance reviled that the interface covered with LC shows considerably lower flexibility as compared to LC free interface. The LC layer eventually dissolves in the water phase at low oil-to-water ratio, while at high oil-to-water ratio it can form an equilibrium phase, which spreads spontaneously at the oil-water interface.     

Thin-Layer Chromatography with an Isolated Support and Forced Flow of the Mobile Phase

JPC – Journal of Planar Chromatography – Modern TLC -     

Studies on the photooxidation mechanism of polymers. I. Photolysis and photooxidation of polystyrene

A new mechanism has been proposed for the photooxidation of polystyrene as film and in benzene. The initial stage of the photooxidative degradation may involve reactions of singlet oxygen with polystyrene molecules. Singlet oxygen may be formed in the reaction between excited benzene ring in polystyrene molecule and molecular oxygen. The addition of singlet oxygen quenchers such as 1,3-cyclohexadiene or β-carotene reduces the rate of polymer degradation in benzene solution. The mechanisms of the photolysis of polystyrene as film and in benzene solution, in vacuo and in the presence of oxygen, are discussed and interpretations proposed. The pronounced yellowing of polystyrene during the photooxidation process is interpreted as a reaction involving benzene ring-opening photooxidation in polystyrene molecule. These results were obtained by comparing ultraviolet and infrared spectra in experiments of photooxidation of pure liquid benzene and polystyrene film.     

Molecular vibrations in a gradient extremal path

Summary The calculation of vibrational states using a gradient extremal path is discussed. Gradient extremal paths are defined by local criteria, which lead to stable solutions. This has certain advantages in comparison with a steepest-descent path, which is often difficult to determine accurately. For cases where a reaction path formalism is applicable, a path based on the gradient extremal concept gives results in close agreement with those obtained using traditional steepest-descent methods. We present algorithms for carrying out such calculations and also give some numerical results.     

Stereoselective formation of glycosyl sulfoxides and their subsequent equilibration: ring inversion of an alpha-xylopyranosyl sulfoxide dependent on the configuration at sulfur

A series of four S-allyl D-thiopyranosides, alpha- and beta-manno and xylo, were oxidized with MCPBA at low temperature to give seven of the eight possible sulfoxides, whose configuration at sulfur was determined either directly by X-ray crystallography or by correlation with closely related structures. For the axial thioglycosides oxidation leads very predominantly to the (R)(S)-diastereomer in the xylo series and exclusively so in the manno series; the configuration at C2 is of little importance in determining the stereoselectivity of oxidation of axial thioglycopyranosides. In the equatorial series the configuration at C2 has a significant effect on the outcome of the reaction as, although both series favored the (S)(S)-sulfoxide, selectivity was significantly higher in the case of the beta-mannoside than of the beta-xyloside. The two alpha-xylo sulfoxides have different conformations of the pyranoside ring with the (R)(S)-isomer adopting the (1)C(4) chair and the (S)(S)-diastereomer the (4)C(1). Each pair of diastereomeric sulfoxides was thermally equilibrated in C(6)D(6) and in CD(3)OD. In the mannose series the kinetic isomers are also thermodynamically preferred. In the xylose series, on the other hand, the nature of the thermodynamic isomer in both the alpha- and beta-anomers is a function of solvent with a switch observed on going from C(6)D(6) to CD(3)OD. The results are rationalized in terms of the exo-anomeric effect, steric shielding provided by H3 and H5 in the axial series, the interaction of the C2-O2 and sulfoxide dipoles, and increased steric interactions on hydrogen bonding of the sulfoxides to CD(3)OD.     

Response Characteristics of Arsenic-Sensitive Bioreporters Expressing the gfp Reporter Gene

This paper describes the development of an analytical technique for arsenic analyses that is based on genetically-modified bioreporter bacteria bearing a gene encoding for the production of a green fluorescent protein (gfp). Upon exposure to arsenic (in the aqueous form of arsenite), the bioreporter production of the fluorescent reporter molecule is monitored spectroscopically. We compared the response measured as a function of time and concentration by steady-state fluorimetry (SSF) to that measured by epi-fluorescent microscopy (EFM). SSF is a bulk technique; as such it inherently yields less information, whereas EFM monitors the response of many individual cells simultaneously and data can be processed in terms of population averages or subpopulations. For the bioreporter strain used here, as well as for the literature we cite, the two techniques exhibit similar performance characteristics. The results presented here show that the EFM technique can compete with SSF and shows substantially more promise for future improvement; it is a matter of research interest to develop optimized methods of EFM image analysis and statistical data treatment. EFM is a conduit for understanding the dynamics of individual cell response vs. population response, which is not only a matter of research interest, but is also promising in the practical terms of developing micro-scale analysis.     

Infrared laser ablation study of pressed soil pellets with inductively coupled plasma atomic emission spectrometry

Potential of infrared laser ablation (LA) coupled with ICP-AES as a technique suitable for the determination of trace elements (Zn, Cu, Ni, Cr, and V) in agricultural soils was studied. Operating parameters such as laser beam energy, laser beam focusing with respect to the sample surface, and velocity of the sample translation in the plane perpendicular to the laser beam were optimized. Soil samples were mixed with powdered Ag as a binder, and an internal standard (GeO(2)), and pressed into pellets. Calibration samples were prepared by adding known amounts of oxides of elements of interest into soils of known elemental composition and then processed in the same way as the analyzed samples. Calibration curves were found to be linear at least up to several hundreds of mg kg(-1) for the elements of interest. The elemental contents obtained by using LA-ICP-AES were compared with those obtained by analysis using wet chemistry followed by ICP-AES with pneumatic nebulization (PN). The results were in good agreement. Accuracy was also tested using certified reference soils with a bias not exceeding 10% relative.     

Synthesis of 2,2-Dimethyl-1,2-Dihydro-3H-pyrrol-3-one Preliminary Communication

The title compound 3g is obtained via two different routes, either in a multistep synthesis starting from 2-amino-2-methylpropionic acid (methylalanine) or by light-induced, oxidative dealkylation of the corresponding N-isopropyl derivative 3c .     

Labeling vibrations by light: ultrafast transient 2D-IR spectroscopy tracks vibrational modes during photoinduced charge transfer

We report on a novel ultrafast two-dimensional infrared laser experiment that correlates vibrational bands of reactant and product of a photoreaction. The possibilities of this technique are demonstrated for the metal-to-ligand charge transfer (MLCT) in [Re(CO)3Cl(dmbpy)] (dmbpy = 4,4'-dimethyl-2,2'bipyridine) where we correlated the CO vibrational modes of the ground state and the MLCT state. A distinct vibrational mode is excited in the electronic ground state by an infrared laser pulse. This vibrational label survives the subsequent electronic excitation and can be followed in the excited electronic state. It is shown that the order of the vibrational energy levels is not preserved when exciting the molecule as was commonly assumed in the literature.