Radical Reactivity of the Biradical [⋅P(μ-NTer)2P⋅] and Isolation of a Persistent Phosphorus-Cantered Monoradical [⋅P(μ-NTer)2P-Et]

The activation of C−Br bonds in various bromoalkanes by the biradical [⋅P(μ-NTer)₂P⋅] ( 1 ) (Ter=2,6-bis-(2,4,6-trimethylphenyl)-phenyl) is reported, yielding trans-addition products of the type [Br−P(μ-NTer)₂P−R] ( 2 ), so-called 1,3-substituted cyclo-1,3-diphospha-2,4-diazanes. This addition reaction, which represents a new easy approach to asymmetrically substituted cyclo-1,3-diphospha-2,4-diazanes, was investigated mechanistically by different spectroscopic methods (NMR, EPR, IR, Raman); the results suggested a stepwise radical reaction mechanism, as evidenced by the in-situ detection of the phosphorus-centered monoradical [⋅P(μ-NTer)₂P-R].< To provide further evidence for the radical mechanism, [⋅P(μ-NTer)₂P-Et] ( 3Et ⋅) was synthesized directly by reduction of the bromoethane addition product [Br-P(μ-NTer)₂P-Et] ( 2 a ) with magnesium, resulting in the formation of the persistent phosphorus-centered monoradical [⋅P(μ-NTer)₂P-Et], which could be isolated and fully characterized, including single-crystal X-ray diffraction. Comparison of the EPR spectrum of the radical intermediate in the addition reaction with that of the synthesized new [⋅P(μ-NTer)₂P-Et] radical clearly proves the existence of radicals over the course of the reaction of biradical [⋅P(μ-NTer)₂P⋅] ( 1 ) with bromoethane. Extensive DFT and coupled cluster calculations corroborate the experimental data for a radical mechanism in the reaction of biradical [⋅P(μ-NTer)₂P⋅] with EtBr. In the field of hetero-cyclobutane-1,3-diyls, the demonstration of a stepwise radical reaction represents a new aspect and closes the gap between P-centered biradicals and P-centered monoradicals in terms of radical reactivity.     

Separation of heart rate variability components of the autonomic nervous system by utilizing principal dynamic modes

This work introduces a modified Principal Dynamic Modes (PDM) methodology using eigenvalue/eigenvector analysis to separate individual components of the sympathetic and parasympathetic nervous contributions to heart rate variability. We have modified the PDM technique to be used with even a single output signal of heart rate variability data, whereas the original PDMs required both input and output data. This method specifically accounts for the inherent nonlinear dynamics of heart rate control, which the current method of power spectrum density (PSD) is unable to do. Propranolol and atropine were administered to normal human volunteers intravenously to inhibit the sympathetic and parasympathetic activities, respectively. With separate applications of the respective drugs, we found a significant decrease in the amplitude of the waveforms that correspond to each nervous activity. Furthermore, we observed near complete elimination of these dynamics when both drugs were given to the subjects. Comparison of our method to the conventional low/high frequency ratio of PSD shows that PDM methodology provides much more accurate assessment of the autonomic nervous balance by separation of individual components of the autonomic nervous activities. The PDM methodology is expected to have an added benefit that diagnosis and prognostication of a patient's health can be determined simply via a non-invasive electrocardiogram.     

The effect of carbon nanotubes on epoxy matrix nanocomposites

The paper concerns thermal properties of epoxy/nanotubes composites for aircraft application. In this work, influence of carbon nanotubes on thermal stability, thermal conductivity, and crosslinking density of epoxy matrix was determined. Three kinds of nanotubes were used: non-modified with 1- and 1.5-μm length, and 1-μm length modified with amino groups. Scanning electron microscopy observations were done for examining dispersion of nanotubes in the epoxy matrix. Glass transition temperature (T _g) was readout from differential scanning calorimetry. From dynamic mechanical analysis, crosslinking density was calculated for epoxy and its composites. Also, thermogravimetric analysis was done to determine influence of nanotubes addition on thermal stability and decomposition process of composites. Activation energy was calculated from TGA curves by Flynn–Wall–Ozawa method. Thermal diffusivity was also measured. SEM images proved the uniform dispersion of carbon nanotubes without any agglomerates. It was found that nanotubes modified with amino groups lead to the increase of epoxy matrix crosslinking density. The significant increase in T _g was also observed. On the other hand, addition of carbon nanotubes leads to the decrease of thermal stability of polymer due to the increase of thermal diffusivity.     

The Fundamental Basis for Cyclopolymerization. VII. A Cyclopolymerization Study of Certain Allylcycloalkenes

The cyclopolymerization characteristics of 3-allylcyclopentene, 3 allylcyclopentene, 3-allylcyclohexene, and 4-allylohexene were studied and the extent of their cyclopolymerization by cationic initiation were compared with previously reported solvolysis results involving the same intermediate carbonium ion. The results of this study were also compared with previously reported results on 4-vinylcyclohexene and 1, 4-dimethylenecyclohexane. The allylcycloalkenes were also polymerized by metal alkyl coordination catalysts and the extent of cyclization in each case was determined. The polymers derived from these monomers invariably contained polymeric fractions (27 to 99%) which were soluble in non-polar organic solvents. Calculations based on NMR spectral data indicated the cationic polymers were 68 to 95% cyclized. The extent of cyclization was found to parallel the interolefinic separation in the monomer. Coordination polymerization yielded somewhat lower ratios of cyclizations (54 to 80%) in all cases except for 4-allylcyclohexene. 4-Allylcyclohexene gave only 5 to 54% cyclization, 4-Vinylcyclohexene, 3-allylcyclopentene, and 3-allylcyclohexene produced soluble copolymers with maleic anhydride. Elemental analysis indicated the composition of these copolymers to be 2:1 molar in maleic anhydride and diene units. A cyclic copolymerization mechanism suggested the formation of a multicyclic repeating unit. The other monomers gave crosslinked polymers since maleic anhydride could not be incorporated into a six-membered ring.     

Recovery of Polyphenols Using Pressurized Hot Water Extraction (PHWE) from Black Rosehip Followed by Encapsulation for Increased Bioaccessibility and Antioxidant Activity

In this work, pressurized hot water extraction (PHWE) of hydrophilic polyphenols from black rosehip fruit was maximized using response surface methodology for simultaneous optimization in terms of extraction yield, total antioxidant capacity, total (poly)phenols, catechin, total monomeric anthocyanins, and cyanidin-3-O-glucoside. Extraction parameters, including temperature (X1: 40–80 °C) and the solvent-to-solid ratio (X2: 10–40 mL/g), were investigated as independent variables. Experimentally obtained values were fitted to a second-order polynomial model, and optimal conditions were determined using multiple regression analysis and analysis of variance. The black rosehip extract (BRE) obtained at optimized PHWE conditions was further encapsulated in biopolymer-coated liposomes and spray dried to enhance its processing and digestive stability. After reconstitution, the fabricated particles had an average size of 247–380 nm and a zeta-potential of 15–45 mV. Moreover, encapsulation provided remarkable protection of the phenolics under in vitro gastrointestinal digestion conditions, resulting in up to a 5.6-fold more phenolics in the bioaccessible fraction, which also had 2.9–8.6-fold higher antioxidant activity compared to the nonencapsulated BRE. In conclusion, PHWE in combination with a biopolymer coating is a potent method for the production of stable and safe edible natural extracts for the delivery of (poly)phenolic compounds in food and dietary supplements.     

Iron-catalysed alkene and heteroarene H/D exchange by reversible protonation of iron-hydride intermediates

C–H functionalisation reactions offer a sustainable method for molecular construction and diversification. These reactions however remain dominated by precious metal catalysis. While significant interest in iron-catalysed C–H activation reactions has emerged, the isolation, characterisation and mechanistic understanding of these processes remain lacking. Herein the iron-catalysed C(sp²)–H bond hydrogen/deuterium exchange reaction using CD₃OD is reported for both heterocycles and, for the first time, alkenes (38 examples). Isolation and characterisation, including by single-crystal X-ray diffraction, of the key iron-aryl and iron-alkenyl C–H metallation intermediates provided evidence for a reversible protonation of the active iron hydride catalyst. Good chemoselectivity was observed for both substrate classes. The developed procedure is orthogonal to previous iron-catalysed H/D exchange methods which used C₆D₆, D₂, or D₂O as the deuterium source, and uses only bench-stable reagents, including the iron(ii) pre-catalyst. Further, a new mechanism of iron-hydride formation is reported in which β-hydride elimination from an alcohol generates the iron hydride. The ability to produce, isolate and characterise the organometallic products arising from C–H activation presents a basis for future discovery and development.

The iron-catalysed C(sp²)–H bond H/D exchange reaction using CD₃OD is reported for both heterocycles and alkenes. Characterisation of the key C–H metallation intermediates provided evidence for reversible protonation of the iron hydride catalyst.     

Pflanzenchemie

Analytical and Bioanalytical Chemistry -