Superstructures of temporarily stabilized nanocrystalline CaCO3 particles: morphological control via water surface tension variation

In this paper, the formation of different complex morphologies of nanocrystalline CaCO3 under the control of double hydrophilic block copolymers (DHBCs) carrying phosphate groups is described. The DHBCs consist of a poly(ethylene glycol) (PEG) block and a pendant poly[2-(2-hydroxy ethyl)ethylene] block with different degrees of phosphorylation up to 40%, some of which show surface activity. The polymers furthermore temporarily stabilize CaCO3 nanocrystals, which are formed by slow CO2 evaporation from a supersaturated Ca(HCO3)2 solution (Kitano method). The polymers are active down to concentrations of 10(-4) g/L. In dependence of the nature and concentration of the DHBC, tunable complex shuttlecock flowerlike and other superstructures are formed, which are aggregates of CaCO3 vaterite nanoparticles with an enhanced stability of at least 2 months. It is shown that the aggregation starts around template CO2 gas bubbles at the air/water interface. The size and morphology of the growing aggregates depends on the polymer concentration, phosphorylation degree, and water surface tension. The latter determines when the aggregate sinks to the bottom, interrupting the further growth process. Variation of the water surface tension by addition of the nonionic surfactant Antharox CO880 also allows a variation of the aggregate morphology, thus implying the described method as simple and versatile for the generation of complex CaCO3 morphologies.     

Determination of mercury in seafood by flow injection-cold vapor atomic absorption spectrometry after microwave digestion: NMKL interlaboratory study. Nordic Committee on Food Analysis

Ten laboratories participated in an interlaboratory method-performance (collaborative) study of a method for the determination of mercury in foods of marine origin by flow injection-cold vapor atomic absorption spectrometry after wet digestion using a microwave oven technique. The study was preceded by a training round of samples of known identity. The method was tested on a total of 7 seafood products: blue mussel (Mytilus edulis), cod muscle (Gadus morhua), crab (Cancer pagurus), scampi (Nephrops norwegicus), black scabbard fish (Aphnopus carbo), longnose velvet dogfish (Centroscymus crepidater), and Portuguese dogfish (Cenbroscymus coelolepis) with mercury concentrations of 0.14, 0.24, 0.35, 0.59,11.42, 4.2, and 13.2 microg/g, respectively. The materials were presented to the participants in the study as blind duplicates, and the participants were asked to perform single determinations on each sample. Repeatability relative standard deviations (RSDr) for mercury ranged from 2.4 to 14.0%. Reproducibility relative standard deviations (RSDR) ranged from 7.7 to 16.6%. HORRAT values for all samples were <1.0.     

Versatile solid-phase synthesis of secondary amines from alcohols. Development of an N-Boc-(o-nitrobenzene)sulfonamide linker

The development of a versatile amine releasing linker based on the modified o-nitrobenzene sulfonamide protective group is described. This new N-Boc-o-nitrobenzenesulfonamide (Boc-ONBS) linker enables the elaboration on resin of primary and secondary amines by sequential substitution of the sulfonamide moiety using the Mitsunobu reaction. A 16-member array of secondary and Boc protected primary amines was then prepared using this linker.     

Alkylamino- und Dialkylamino-phenoxy-methylsilane

Zusammenfassung Alkyl-und Dialkylamino-phenoxy-methylsilane ließen sich sowohl durch Umsetzung von Phenoxy-methyl-chlorsilanen mit primären und sekundären Aminen unter Cl/NRR-Austausch als auch durch Reaktion von Phenoxymethylsilanen mit substituierten Alkaliamiden unter C₆H₅O/NRR-Austausch gemäß den Gl. (1) bis (6) darstellen. Ihre Eigenschaften sind aus Tab. 1 zu ersehen.

---

We succeeded in preparing alkyl- and dialkylamino-phenoxymethylsilanes by reaction of phenoxy-methyl-chlorosilanes with primary and secondary amines (Cl/NRR-exchange) as well as by reaction of phenoxymethylsilanes with substituted alkaliamides (C₆H₅O/NRR-exchange)according equations (1) to (6). Their properties are to be seen in table 1.

---

---

53. Mitt.:U. Wannagat undG. Schreiner, Mh. Chem.96, 1902 (1965).

---

Mit Auszügen aus der DissertationG. Schreiner und der DiplomarbeitJ. Pohl, Techn. Hochsch. Graz, 1964.     

Determination of Aroma Compounds from Alcoholic Beverages in Spiked Blood Samples by Means of Dynamic Headspace GC–MS

Some aroma compounds found in alcoholic beverages are characteristic of a certain beverage (i.e. 2,4-decadienoic acid ethyl ester is characteristic of pear spirit and 5-butyltetrahydro-4-methylfuran-2-on “whiskey lactone” is characteristic of aged spirits like whiskey). These substances were detectable in beverages but not in blood samples. The aim of this investigation was to find a sensitive sampling technique for aroma compounds in whole blood samples. This technique may be used in forensic toxicology for examination of drinking claims. The method comprises dynamic headspace sampling using a purge and trap concentrator, followed by quantitative gas chromatography–mass spectrometry (dynamic HS–GC–MS). The influence of sample preparation, trap adsorbents and sample temperature as well as desorption time and purge time on the quality of the analytical results were investigated. The following optimal parameters were determined: stirred and diluted whole blood sample without salt addition, use of Carbotrap C as trap material, sample temperature at 80 °C, desorption time 20 min and purge time 30 min. These optimal parameters were used for the determination of detection limits (LOD). The LOD of aroma compounds by means of dynamic headspace sampling were compared with the results of conventional sampling: the static headspace technique. Limits of detection for the aroma compounds with conventional static headspace GC are in the range 400–10,000 μg L^?1. Dynamic headspace–GC was found to be a more sensitive sampling technique for most of the aroma compounds investigated (e.g. C₄–C₈ ethyl esters, benzoic acid ethyl ester, linalool oxide and 4-ethylguaiacol) with detection limits between 1 and 50 μg L^?1, but there were also limits to the sampling of substances with lower volatility like decanoic acid ethyl ester, 2,4-decadienoic acid ethyl ester, eugenol and whiskey lactone with detection limits of about 1,000 μg L^?1.     

Studies of the reactions between indole-2,3-diones (isatins) and 2-aminobenzylamine

Reflux of equimolecular amounts 2-aminobenzylamine and isatins in acetic acid produced indolo[3,2-c]quinolin-6-ones in good yields. A proposed mechanism involving initial formation of a spiro compound is given. This isolable intermediate subsequently rearranges via a sequential isocyanate ring opening and a cyclisation process to a urea derivative which finally cyclized to the indolo[3,2-c]quinolin-6-ones. The urea derivative could be prepared separately and cyclized selectively to indolo[3,2-c]quinolin-6-one. Reaction of N-acetylisatin with 2-aminobenzylamine at room temperature yielded the 1,4-benzodiazepinone 3-(2-acetamidophenyl)-1,5-dihydro-1,4-benzodiazepin-2-one whereas its isomer 2(2-acetamidophenyl)-4,5-dihydro-1,4-benzodiazepin-3-one was obtained from 2-(2-acetylaminophenyl)-N-(2-aminobenzyl)-2-oxoacetamide in acetic acid at room temperature.The previously unknown linear isomer of indolo[3,2-c]quinolin-6-one, i.e. indolo[2,3-b]quinolin-11-one, has been prepared by thermal (260°C) cyclization of methyl 2-phenylamino indole-3-carboxylate, which in turn was prepared in two steps from methyl indole-3-carboxylate.     

Deactivation of silica surfaces with a silanol-terminated polysiloxane; structural sharacterization by inverse gas chromatography and solid-state NMR

Retention gape deactivated with Silicone OV-1701-OH show good chromatographic performance and remarkable stability against water induced stationary phase degradrdation. In an attempt to better understand the findamentals off the deactivation process using silanol terminated polysiloxanes, a fumed silica was deactivated with Silicon OV-1701-OH. In contrast to fused silic capillaries, fumed silica (Aerosil A-200) can be studied by ²⁹Si cross-polarization magic-angle-spinning (CPMAS) NMR, thus serving as a model substrate for fused silica. Retention data from inverse gas chromatography at infinite dilurion and ²⁹Si CP MAS NMR data of five Aerosil phases, differing in residual silanol surface concentration, are correlated with the aim of validating this approach for stationary phase characterization. A comparatively detailed model of the deactivating polymer layer that explains the observed absorption activities is deduced. Surface silanols are shown to play a key role in the polymer layer, the structure of which is of primary importance for the absorption behavior after deactivation. Contrary to common belief, the absolute silanol surface concentration after deativation is only of secondary importance for the overall absorption activity. High silanol surface concentrations enhance degradation of the polysiloxane chains into small cyclic fragments as well as subsequent absorption and immobolization to the silica substrate surface. The mobility of linear polysiloxane chains in the kHz regime (as determined bby NMR cross-polarization dynamics) appears to determine the extent which the residual silanols are accessible for analytes. It is therefore anticipated that there is an optimum silanol surface concentration of fused silica surfaces to be deactivated with silanol terminated polysiloxanes; it should be lazrge enough to adsord polymer fragments, but not large to avoid excessive residual silanol activity.     

Adsorption of water vapour from humid air by selected carbon adsorbents

The water uptake by carbon molecular sieves (CMS) and graphitized carbons, all of which are used to determine volatile organic compounds in air, was investigated using a direct experimental approach. CMS, e.g. Carboxen 1002, Carboxen 1003 and Anasorb CMS adsorb substantial amounts of water, in the range 400 to 450 mg per gram of adsorbent. Graphitized carbons, e.g. Carbrogaph 5TD and Carbopack X show low water trapping, less than 30 mg g(-1) and Carbopack Y as little as 5 mg g(-1) or less. The water sorption capacity for graphitized carbons is strongly dependent on the relative humidity (RH). The change of RH from 95 to 90% decreases the amount of adsorbed water by more than a factor of 2. Two different water adsorption mechanisms are operative: adsorption on polar centers and micropore volume filling. For graphitized carbons and CMS at low RH, adsorption on polar centers is involved. For CMS, once the threshold value of relative humidity (RHth) is surpassed, micropore volume filling becomes predominant. RHth is 44 +/- 3 and 42 +/- 3% for Carboxen 1002 and 1003, respectively, and 32 +/- 3% for Anasorb CMS. The CMS mass in the trap was found not to affect the mass of retained water under condition of incomplete saturation of adsorbent bed with water. Thus, the restrictions commonly imposed on the CMS mass are not necessary. The dry purging technique is suggested to remove adsorbed water. Carbograph 5TD and Carbopack X require only a few hundred ml of dry air to remove adsorbed water entirely. Water can also be purged out from CMS; however, much larger volumes of dry air are needed.     

Beta-sheet preferences from first principles

The natural amino acids have different preferences of occurring in specific types of secondary protein structure. Simulations are performed on periodic model beta-sheets of 14 different amino acids, at the level of density functional theory, employing the generalized gradient approximation. We find that the statistically observed beta-sheet propensities correlate very well with the calculated binding energies. Analysis of the calculations shows that the beta-sheet propensities are determined by the local flexibility of the individual polypeptide strands.