In-house quality control material of nicarbazin and narasin in eggs: preparation and inter-laboratory evaluation

Coccidiostats are a group of pharmacologically active substances widely used in veterinary practice. Their residues are detected relatively often in poultry tissues and egg samples analyzed as part of official residue control programs in the European Union. Therefore, accuracy of quantitative results needs to be monitored through internal and external quality control studies. In addition, the use of materials containing incurred residues would be welcome to for ongoing monitoring of the method accuracy. Unfortunately, in the field of veterinary drug residues, certified reference materials are often unavailable. Therefore, in-house quality control material of incurred lyophilized eggs containing narasin and nicarbazin has been produced and characterized. The eggs originated from hens receiving feed with coccidiostat premix Maxiban were mixed to obtain presumed concentrations of residues and freeze-dried. Homogeneity of the material was verified by the duplicate analysis of ten random samples, and the results proved that the between samples variation was negligible in comparison with the method repeatability. No measurable loss of analytes was observed within 1 year; the slope of the regression line of the results of stability measurements was not significantly different from zero. The assigned values were expressed as medians of the results of inter-laboratory comparison performed in four different European laboratories; the uncertainty of the material was estimated, taken into consideration all above tests, resulting in (14.4 ± 2.53) µg/kg for nicarbazin and (7.91 ± 1.52) µg/kg for narasin.     

Padé approximants for functions with branch points — strong asymptotics of Nuttall–Stahl polynomials

Let f be a germ of an analytic function at infinity that can be analytically continued along any path in the complex plane deprived of a finite set of points, \({f \in \mathcal{A}(\bar{\mathbb{C}} \setminus A)}\), \({\# A< \infty}\). J. Nuttall has put forward the important relation between the maximal domain of f where the function has a single-valued branch and the domain of convergence of the diagonal Padé approximants for f. The Padé approximants, which are rational functions and thus single-valued, approximate a holomorphic branch of f in the domain of their convergence. At the same time most of their poles tend to the boundary of the domain of convergence and the support of their limiting distribution models the system of cuts that makes the function f single-valued. Nuttall has conjectured (and proved for many important special cases) that this system of cuts has minimal logarithmic capacity among all other systems converting the function f to a single-valued branch. Thus the domain of convergence corresponds to the maximal (in the sense of minimal boundary) domain of single-valued holomorphy for the analytic function \({f\in\mathcal{A}(\bar{\mathbb{C}} \setminus A)}\). The complete proof of Nuttall’s conjecture (even in a more general setting where the set A has logarithmic capacity 0) was obtained by H. Stahl. In this work, we derive strong asymptotics for the denominators of the diagonal Padé approximants for this problem in a rather general setting. We assume that A is a finite set of branch points of f which have the algebro-logarithmic character and which are placed in a generic position. The last restriction means that we exclude from our consideration some degenerated “constellations” of the branch points.     

Edge Flips in Surface Meshes

Little theoretical work has been done on edge flips in surface meshes despite their popular usage in graphics and solid modeling to improve mesh equality. We propose the class of \((\varepsilon ,\alpha )\)-meshes of a surface that satisfy several properties: the vertex set is an \(\varepsilon \)-sample of the surface, the triangle angles are no smaller than a constant \(\alpha \), some triangle has a good normal, and the mesh is homeomorphic to the surface. We believe that many surface meshes encountered in practice are \((\varepsilon ,\alpha )\)-meshes or close to being one. We prove that flipping the appropriate edges can smooth a dense \((\varepsilon ,\alpha )\)-mesh by making the triangle normals better approximations of the surface normals and the dihedral angles closer to \(\pi \). Moreover, the edge flips can be performed in time linear in the number of vertices. This helps to explain the effectiveness of edge flips as observed in practice and in our experiments. A corollary of our techniques is that, in \(\mathbb {R}^2\), every triangulation with a constant lower bound on the angles can be flipped in linear time to the Delaunay triangulation.     

Combining ferrocene,thiophene and a boronic acid: a hybrid ligand for reagentless electrochemical sensing of cis-diols

A redox-active affinity ligand suitable for reagentless sensing of cis-diols was synthesised and characterised. 4-[(Ferrocenylamino)methyl]thiophene-3-boronic acid (FcTBA) was allowed to interact with the model cis-diol, sorbitol. A discrete, cathodic shift of the redox potential was observed upon interaction of FcTBA with sorbitol thus providing simultaneous differentiation between the free and bound forms of this sensor molecule. Similar behaviour was observed also for FcTBA co-immobilised with thiophene in a mixed self-assembled monolayer on a gold electrode.     

Recognition of chiral anions using calix[4]arene-based ureido receptor in the 1,3-alternate conformation

A new type of calixarene-based receptor designed for the recognition of chiral anions was prepared by the introduction of (S)-2-methylbutan-1-ol moieties into the lower rim of calixarene. The immobilization of calixarene skeleton in the 1,3-alternate conformation enabled the construction of a cavity consisting of preorganised ureido functions and chiral substituents in close proximity. This cavity is capable of chiral discrimination of selected anions as demonstrated on d- and l-phenylalaninates.     

Rapid and simple electrochemical detection of morphine on graphene–palladium-hybrid-modified glassy carbon electrode

A hybrid of reduced graphene oxide–palladium (RGO–Pd) nano- to submicron-scale particles was simultaneously chemically prepared using microwave irradiation. The electrochemical investigation of the resulting hybrid was achieved using cyclic voltammetry and differential pulse voltammetry. RGO–Pd had a higher current response than unmodified RGO toward the oxidation of morphine. Several factors that can affect the electrochemical response were studied, including accumulation time and potential, Pd loading, scan rate, and pH of electrolyte. At the optimum conditions, the concentration of morphine was determined using differential pulse voltammetry in a linear range from 0.34 to 12 μmol L^?1 and from 14 to 100 μmol L^?1, with detection limits of 12.95 nmol L^?1 for the first range. The electrode had high sensitivity toward morphine oxidation in the presence of dopamine (DA) and of the interference compounds ascorbic acid (AA) and uric acid (UA). Electrochemical determination of morphine in a spiked urine sample was performed, and a low detection limit was obtained. Validation conditions including reproducibility, sensitivity, and recovery were evaluated successfully in the determination of morphine in diluted human urine.

Open image in new window

     

An assessment of the liquid–gas partitioning behavior of major wastewater odorants using two comparative experimental approaches: liquid sample-based vaporization vs. impinger-based dynamic headspace extraction into sorbent tubes

The gas–liquid partitioning behavior of major odorants (acetic acid, propionic acid, isobutyric acid, n-butyric acid, i-valeric acid, n-valeric acid, hexanoic acid, phenol, p-cresol, indole, skatole, and toluene (as a reference)) commonly found in microbially digested wastewaters was investigated by two experimental approaches. Firstly, a simple vaporization method was applied to measure the target odorants dissolved in liquid samples with the aid of sorbent tube/thermal desorption/gas chromatography/mass spectrometry. As an alternative method, an impinger-based dynamic headspace sampling method was also explored to measure the partitioning of target odorants between the gas and liquid phases with the same detection system. The relative extraction efficiency (in percent) of the odorants by dynamic headspace sampling was estimated against the calibration results derived by the vaporization method. Finally, the concentrations of the major odorants in real digested wastewater samples were also analyzed using both analytical approaches. Through a parallel application of the two experimental methods, we intended to develop an experimental approach to be able to assess the liquid-to-gas phase partitioning behavior of major odorants in a complex wastewater system. The relative sensitivity of the two methods expressed in terms of response factor ratios (RF_vap/RF_imp) of liquid standard calibration between vaporization and impinger-based calibrations varied widely from 981 (skatole) to 6,022 (acetic acid). Comparison of this relative sensitivity thus highlights the rather low extraction efficiency of the highly soluble and more acidic odorants from wastewater samples in dynamic headspace sampling.     

Simulation of oxidative stress of guanosine and 8-oxo-7,8-dihydroguanosine by electrochemically assisted injection–capillary electrophoresis–mass spectrometry

Oxidative stress plays a crucial role in DNA and RNA damage within biological cells. As a consequence, mutations of DNA can occur, leading to disorders like cancer and neurodegenerative and cardiovascular diseases. The oxidative attack of guanosine and 8-oxo-7,8-dihydroguanosine is simulated by electrochemistry coupled to capillary electrophoresis–mass spectrometry. The electrochemical conversion of the compound of interest is implemented in the injection protocol termed electrochemically assisted injection (EAI). In this way, oxidation products of guanosine can be generated electrochemically, separated by capillary electrophoresis, and detected by electrospray ionization time-of-flight mass spectrometry (EAI–CE–MS). A fully automated laboratory-made EAI cell with an integrated buffer reservoir and a compartment holding screen-printed electrodes is used for the injection. In this study, parameters like pH of the sample solution and the redox potential applied during the injection were investigated in terms of corresponding formation of well-known markers of DNA damage. The important product species, 8-oxo-7,8-dihydroguanosine, was investigated in a separate study to distinguish between primary and secondary oxidation products. A comparison of product species formed under alkaline, neutral, and acidic conditions is presented. To compare real biological systems with an analytical approach for simulation of oxidative stress, it is desirable to have a well-defined control over the redox potential and to use solutions, which are close to physiological conditions. In contrast to typical HPLC–MS protocols, the hyphenation of EAI, CE, and MS enables the generation and separation of species involved without the use of organic solvents. Thus, information of the electrochemical behavior of the nucleoside guanosine as well as the primary oxidation product 8-oxo-7,8-dihydroguanosine can be characterized under conditions close to the physiological situation. In addition, the migration behavior found in CE separations of product species can be used to identify compounds if several possible species have the same mass-to-charge values determined by MS detection.

Open image in new window

Figure ?

     

Aerobic oxidation of cumene catalysed by 4-alkyloxycarbonyl-N-hydroxyphthalimide

4-Hexyloxycarbonyl-, 4-dodecyloxycarbonyl- and 4-hexadecyloxycarbonyl-N-hydroxyphthalimides were synthesised using trimellitic anhydride chloride as the starting material. The obtained lipophilic derivatives of N-hydroxyphthalimide were applied as catalysts of the cumene oxidation reaction with oxygen performed in polar acetonitrile, in non-polar tert-butylbenzene and in the absence of a solvent. The courses of reactions catalysed by N-hydroxyphthalimide and its derivatives were compared.      

High‐ and low‐temperature phases in isostructural 4‐chloro‐3‐nitroaniline and 4‐iodo‐3‐nitroaniline

The structures of 4‐chloro‐3‐nitroaniline, C₆H₅ClN₂O₂, (I), and 4‐iodo‐3‐nitroaniline, C₆H₅IN₂O₂, (II), are isomorphs and both undergo continuous (second order) phase transitions at 237 and 200 K, respectively. The structures, as well as their phase transitions, have been studied by single‐crystal X‐ray diffraction, Raman spectroscopy and difference scanning calorimetry experiments. Both high‐temperature phases (293 K) show disorder of the nitro substituents, which are inclined towards the benzene‐ring planes at two different orientations. In the low‐temperature phases (120 K), both inclination angles are well maintained, while the disorder is removed. Concomitantly, the b axis doubles with respect to the room‐temperature cell. Each of the low‐temperature phases of (I) and (II) contains two pairs of independent molecules, where the molecules in each pair are related by noncrystallographic inversion centres. The molecules within each pair have the same absolute value of the inclination angle. The Flack parameter of the low‐temperature phases is very close to 0.5, indicating inversion twinning. This can be envisaged as stacking faults in the low‐temperature phases. It seems that competition between the primary amine–nitro N—H...O hydrogen bonds which form three‐centred hydrogen bonds is the reason for the disorder of the nitro groups, as well as for the phase transition in both (I) and (II). The backbones of the structures are formed by N—H...N hydrogen bonding of moderate strength which results in the graph‐set motif C(3). This graph‐set motif forms a zigzag chain parallel to the monoclinic b axis and is maintained in both the high‐ and the low‐temperature structures. The primary amine groups are pyramidal, with similar geometric values in all four determinations. The high‐temperature phase of (II) has been described previously [Garden et al. (2004). Acta Cryst. C 60 , o328–o330].