Effect of film thickness on the electro-reduction of molecular oxygen on electropolymerized cobalt tetra-aminophthalocyanine films

We studied the electrocatalytic activity of cobalt tetra-aminophthalocyanine (CoTAPc) for the reduction of molecular oxygen (O₂) on adsorbed monomeric and on electropolymerized films of different thicknesses on glassy carbon (GC) electrode. The polymeric films, denoted poly-CoTAPc, were first characterized by electrochemical impedance spectroscopy and it appears that the types of phenomena revealed to be occurring depend less on the film thickness in basic than in acid media. For O₂ reduction, the results showed that poly-CoTAPc is more active than the monomeric CoTAPc adsorbed on GC. Indeed, rotating ring-disk electrode data showed that polymeric CoTAPc promotes the four-electron reduction of O₂ to water in parallel to a two-electron reduction to give peroxide. On monomeric and thin films of poly-CoTAPc, a two-electron reduction mechanism predominates. In basic media the activity increases very slightly with thickness, whereas in acid media this increase is more pronounced. This parallels the observed behavior revealed by electrochemical impedance spectroscopy.     

Sorption of uranium by non-living water hyacinth roots

Summary Many studies have shown that water hyacinth (Eichhornia crassipes) roots can be used to accumulate high concentrations of organic as well as inorganic pollutants. They are currently used to remediate aquatic environments and aqueous solutions. In the present study, sorption of uranium from aqueous solutions by using dried roots of water hyacinth has been investigated. The sorption of uranium was examined as a function of initial concentration, pH, weight of roots and contact time. Five different concentrations 20, 40, 60, 80, and 100 μg ^. ml^-1 were used. Sorption proves to be very rapid and depend on pH, weight of roots and concentration of uranium. Maximum sorption capacity of water hyacinth roots was 64,000 U⁶⁺ μg/g. The sorption of uranium by water hyacinth roots follows a Langmuir isotherm.     

Theory-enforced Re-investigation of the Origin of the Large Metal–Carbon Bond Strength in PdCH2I+ and its reactions with unsaturated hydrocarbons

State-of-the-art ab initio studies demonstrate that the reaction Pd⁺ + CH₃I → PdCH₂I⁺ + H^. is endothermic by ca. 20 kcal/mol, which translates into a bond dissociation energy (BDE) of ca. 83 kcal/mol for the Pd⁺? CH₂I bond. This figure is in agreement with an experimental bracket of 68 kcal/mol < BDE(Pd⁺? CH₂I) < 92 kcal/mol. Based on these findings, the previously studied Pd⁺/CH₃I system was re-investigated, and double-resonance experiments demonstrate that the formation of PdCH₂I⁺ occurs stepwise via PdCH as a reactive intermediate. Further, ion/molecule reactions of PdCH₂I⁺ with unsaturated hydrocarbons are studied, which reveal the formation of carbon–carbon bonds in the gas phase.     

Application of sampled-d.c. anodic stripping voltammetry to metal/fulvic acid equilibria

The use of anodic stripping voltammetry (ASV) to determine the labile metal fraction in metal/ fulvic acid equilibrium systems is discussed. A method is described for distinguishing between the contributions of processes in the reduction and oxidation steps to the observed anodic (stripping) current. This method, which facilitates separate examination of the two processes, is based on timed addition of fulvic acids during the deposition step, on pH control, and on measurement of sampled-d.c. ASV peak areas (Faradaic charge) for metal/fulvic acid solutions. Results are presented for copper(Il) and lead(Il) complexes with six colloid-free soil-derived fulvic acids. In contrast to differential-pulse ASV, the stripping current measured by sampled-d.c. ASV showed no measurable contribution from ligand adsorption on the mercury drop. For heterogeneous ligand systems, such as fulvic acid, use of stripping peak heights over-estimates the fraction of non-labile metal complex because peak broadening results from the range of complexes formed in the anodic step.     

Contribution à la phytochimie du genre Gentiana. XXVI.. Identification d'une nouvelle di-O-glucosyl cinnamoyl-C-glucosylflavone extraite des feuilles de Gentiana X marcailhouana RY.

Phytochemistry of Genus Gentiana. XXVI. Identification of a New Di-O-glucosyl Cinnamoyl-C-glucosylflavone in the Leaves of Gentiana X marcailhouana RY . A new di-O-glucosyl cinnamoyl-C-glucosylflavone has been identified as 4′-O-β-D -glucosyl-2″-O-[2-O-β-D -glucosyl-2,4,5-trihydroxy-(E)-cinnamoyl]isoorientin ( 1 ).     

Derivatives and reactions of glutacondialdehyde V : The crystal and molecular structure of 5-hydroxy-trans-2, trans-4-pentadienal acetate. The charge distribution in the glutacondialdehyde anion

The structure of 5-hydroxy-trans-2, trans-4-pentadienal acetate has been determined, using three-dimensional diffractometercollected X-ray data. The compound has the all-trans configuration with the atoms C-1 to C-5 in a plane. The charge distribution in the acetate and in the glutacondialdehyde anion have been calculated using the CNDO/2 approximation. In both compounds higher negative charges were found on carbon atoms C-2 and C-4 than on C-1, C-3 and C-5.     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Development of a quality control method for the characterization of oligonucleotides by capillary zone electrophoresis-electrospray ionization-quadrupole time of flight-mass spectrometry

A capillary zone electrophoresis-negative electrospray ionization-quadrupole time of flight-mass spectrometric method was developed for the characterization of oligonucleotides after synthesis, using model compounds. The major difficulty is the adduction of metal cations to the polyanionic backbone of the oligonucleotide sample, resulting in complex spectra and decreased sensitivity. Several approaches were investigated to circumvent this problem. Separation was performed in an ammonium carbonate buffer. During separation, the interfering metal ions were exchanged for ammonium ions, which are less tightly bound to the oligonucleotide when ionized. The influence of the addition of piperidine and imidazole or trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) to the running buffer for further reduction of cation adduction was investigated. Addition of CDTA to the buffer system resulted in a deconvoluted spectrum with very little adducts. On-line sample stacking proved vital to preconcentrate the samples. The pH and the concentration of the ammonium carbonate buffer as well as the electrophoresis voltage were optimized to achieve the best signal response for the oligonucleotides and a maximum reduction of the cation adducts as well as a short analysis time. Finally, the sheath liquid composition was examined for further improvement of the signal. The developed method was used to analyze different oligonucleotides (5000-9200 Da) in light of its use as a final quality control method for oligonucleotides in terms of purity and sequence homogeneity of the synthesized products. In all cases, very little adducts were observed in the deconvoluted spectra, and the relative errors of the measured molecular masses ranged from 3 to 35 ppm.     

Synthesis of meso-tetra-(3,5-dibromo-4-hydroxylphenyl)-porphyrin and its application to second-derivative spectrophotometric determination of lead in clinical samples

A new very sensitive and selective chromogenic reagent, meso-tetra-(3,5-dibromo-4-hydroxylphenyl)porphyrin [T(DBHP)P], was synthesized and studied for the determination of trace lead in detail. In 0.10 mol l-1 NaOH medium, lead reacts with T(DBHP)P to form a 1:2 yellow complex, which gives a maximum absorption at 479 nm; 0-0.48 microgram ml-1 Pb(II) obeyed Beer's law. The molar absorptivity of the complex and Sandell's sensitivity are 2.5 x 10(5) 1 mol-1 cm-1 and 0.000812 microgram cm-2, respectively. Second-derivative spectrophotometry is better than conventional spectrophotometry in sensitivity and selectivity, and its limit of quantification, limit of detection and relative standard deviation are 0.70 ng ml-1, 0.21 ng ml-1 and 1.0%, respectively. Ca (3250-fold), Mg (2000-fold), Sr (1000-fold), Ba (750-fold), Al (1000-fold), Bi (500-fold), Fe (2000-fold), Co (750-fold), Ni (1000-fold), Cu (750-fold), Zn (1250-fold), Cd (2500-fold) and Ag (550-fold) do not interfere with the determination of lead. The chromogenic system is remarkably superior to other reagents, especially porphyrin compounds. The influence caused by oxygen in air or in solution can be easily eliminated by adding Na2SO3. The reaction is very stable, the stability constant of the complex being 1.2 x 10(45). The chromogenic reaction is completed within 1 min at room temperature when 8-hydroxylquinoline is used as catalyst. The proposed method has been applied to the direct determination of trace lead in clinical samples. The accuracy and precision are both very satisfactory.     

Trennung,Identifizierung und Bestimmung von Bactericiden auf der Basis von halogenierten Aromaten mittels Gas-Chromatographie

The separation of a mixture of 22 bactericides has been achieved by gas chromatography on columns with silicone rubber W-982 as stationary phase with temperatures between 100° and 300°C. The unchanged compounds as well as their silylation products have been used. The latter are more conveniently used especially for the quantitative determination. To be able to calculate the retention indices after Kovats gas chromatography has been performed isothermally at 180°C for the more volatile compounds and at 250°C for all other bactericides.The retention indices obtained under these conditions are tabulated together with the limits of detection.