Application of rainbow schlieren deflectometry to measure temperature and oxygen concentration in a laminar gas-jet diffusion flame

The quantitative rainbow schlieren deflectometry (RSD) technique was applied to measure temperature and oxygen concentration in an axisymmetric hydrogen gas-jet diffusion flame burning in quiescent air at fuel jet exit Reynolds number of 70. Schlieren measurements were compared with conventional measurements using a thermocouple and a gas-sampling probe. Good agreement between the two measurement techniques was achieved on the fuel-lean side of the flame.     

Velocity measurements in liquid sodium by means of ultrasound Doppler velocimetry

A successful application of ultrasound Doppler velocimetry in liquid sodium flows is described. To obtain sufficient Doppler signals, different problems had to be solved: the transmission of the ultrasonic beam through the channel wall made of stainless steel, the acoustic coupling between the transducer and the channel wall, and the wetting of the inner surface of the wall by the liquid metal, respectively. A sodium flow in a square duct exposed to a transverse magnetic field is investigated. In accordance with the existing knowledge about MHD channel flows, we found that the velocity profiles modified to a M-shape owing to the effect of an inhomogeneous magnetic field. Received: 12 June 2001/Accepted: 27 October 2001     

Necessary Conditions for Differentiability of Distance Functions

Necessary conditions for the Gâteaux differentiability of the distance function to a set are considered. A series of characterizing results is obtained.     

Solving the problem of contact equilibrium of a punch and an elastic body

The variational problem of contact equilibrium of a punch and an elastic body is considered. An equivalent formulation of the problem is given in variational inequality form. Existence and uniqueness of the solution is investigated in a particular case. A penalty method is proposed for approximate solution of the problem.Translated from Vychislitel'naya i Prikladnaya Matematika, No. 56, pp. 97–103, 1985.     

Error analysis: a tool for selecting travel demand models

In developing travel demand models it is generally assumed that the base-year data used in developing the parameters, as well as the forecasted data to be used as independent variables for the design year, are of acceptable quality. The purpose of this paper is to present the application of error propagation theory in assesing the predictive quality of one type of travel demand forecasting model (multinomial logit models) and to demonstrate how error considerations can be used as a tool for identifying the optimal model. The general conclusions of this study are that: (1) it is indeed possible to quantify errors in dependent variables in logit models as a consequence of errors in independent variables; and (2) error consideration can be used as a tool for identifying the optimal model from a set of candidate models. Further research is recommended to develop better insights into the phenomenon of error propagation so that the consideration of errors can be a factor in decisions on model selection.     

On construction of symmetries from integrals of hyperbolic partial differential systems

An algorithm is proposed which allows one to construct higher symmetries of arbitrary order for some special classes of hyperbolic systems possessing integrals. The Pohlmeyer-Lund-Regge system and the open two-dimensional Toda lattices are shown to belong to the class of systems where our algorithm is applicable. __________ Translated from Fundamental’naya i Prikladnaya Matematika (Fundamental and Applied Mathematics), Vol. 10, No. 1, Geometry of Integrable Models, 2004.     

A study of structural, compositional and optical properties of spray-deposited non-stoichiometric (Zn,Fe)S thin films

Non-stoichiometric ternary chalcogenides (Zn,Fe)S were prepared in the film form by pyrolytic spray deposition technique, using air/nitrogen as the carrier gas. The precursor solution comprised of ZnCl₂, FeCl₂ and thiourea. The depositions were carried out under optimum conditions of experimental parameters viz. carrier gas (air/nitrogen) flow rate, concentration of precursor constituents, nozzle substrate distance and temperature of quartz substrate. The deposited thin films were later sintered in argon at 1073 K for 120 min.The structural, compositional and optical properties of the sintered thin films were studied. X-ray diffraction studies of the thin films indicated the presence of (Zn,Fe)S solid solution with prominent cubic sphalerite phase while surface morphology as determined by scanning electron microscopy (SEM) revealed a granular structure.The chemical composition of the resulting thin films as analyzed by energy dispersive X-ray analysis (EDAX) reflected the composition of the precursor solutions from which the depositions were carried out with Fe at% values ranging from 0.4 up to 33.SEM micrographs of thin films reveal that the grain sizes of the thin films prepared using air as carrier gas and N₂ as carrier gas are in the vicinity of 300 and 150 nm, respectively.The diffuse transmittance measurements for thin films, as a function of wavelength reveal the dependence of direct optical band gap on Fe content and type of phase.