The polarized electronic spectra and electric field spectra of benzo-diazoles. II. 2,1,3-benzothiadiazole

The S₁ ← S₀ absorption spectra of 2,1,3-benzothiadiazole (BTD) have been measured at 4.2 K in four different host crystals: naphthalene, durene, p-dichlorobenzene (DCB) and p-dibromobenzene. Detailed vibrational analyses are given for BTD imbedded in napthalene and DCB. The polarization measurements show that the S₁ state has B₂ symmetry, like its selenium analogue (BSD). The transition is dominated by a single totally symmetric mode - 484 cm^?1. The Herzberg-Teller coupling contributes only a very small fraction of the total intensity. The Stark measurements of a DCB sample containing both BTD and BSD enabled us to compare the charge distribution of BTD and BSD in the state S₁. The Stark splittings of BTD are 17% greater than the splittings of BSD. Reorganization of the σ-core during the excitation is used to explain the difference. The drastic change in dipole moment upon excitation implies that the S₁←S₀ transitions of BTD and BSD are not localized in the six-membered ring as suggested by previous workers. Weak phosphorescence of BTD in napthalene and DCB and singlet-triplet absorption spectrum of neat BTD have been observed. The heavy atom effect of spin-orbit coupling is to explain the ST absorption intensity of BTD and BSD.     

A universal temperature controlled membrane interface for the analysis of volatile and semi-volatile organic compounds

A universal temperature controlled membrane interface (TCMI) has been constructed for hollow-fibre membranes. The membrane temperature is controllable in the range -70 to 250 degrees C using an electric heater and a flow of cooled nitrogen or helium gas. Volatile and semi-volatile organic compounds may be detected either by continuous diffusion across the membrane or by in-membrane pre-concentration followed by thermal desorption into the detector. The TCMI interface is demonstrated in combination with mass spectrometry and GC-MS, for the determination of VOCs and SVOCs in aqueous and air samples and for the on-line monitoring of a bioreactor.     

Molecular modeling of cytochrome P450 3A4

The three-dimensional structure of human cytochrome P450 3A4 was modeled based on crystallographic coordinates of four bacterial P450s: P450 BM-3, P450cam, P450terp, and P450eryF. The P450 3A4 sequence was aligned to those of the known proteins using a structure-based alignment of P450 BM-3, P450cam, P450terp, and P450eryF. The coordinates of the model were then calculated using a consensus strategy, and the final structure was optimized in the presence of water. The P450 3A4 model resembles P450 BM-3 the most, but the B helix is similar to that of P450eryF, which leads to an enlarged active site when compared with P450 BM-3, P450cam, and P450terp. The 3A4 residues equivalent to known substrate contact residues of the bacterial proteins and key residues of rat P450 2B1 are located in the active site or the substrate access channel. Docking of progesterone into the P450 3A4 model demonstrated that the substrate bound in a 6-orientation can interact with a number of active site residues, such as 114, 119, 301, 304, 305, 309, 370, 373, and 479, through hydrophobic interactions. The active site of the enzyme can also accommodate erythromycin, which, in addition to the residues listed for progesterone, also contacts residues 101, 104, 105, 214, 215, 217, 218, 374, and 478. The majority of 3A4 residues which interact with progesterone and/or erythromycin possess their equivalents in key residues of P450 2B enzymes, except for residues 297, 480 and 482, which do not contact either substrate in P450 3A4. The results from docking of progesterone and erythromycin into the enzyme model make it possible to pinpoint residues which may be important for 3A4 function and to target them for site-directed mutagenesis.     

Heavy metal phosphate nanophases in silica: influence of radiolysis probed via f-electron state properties

We have assessed the feasibility of carrying out time- and wavelength-resolved laser-induced fluorescence measurements of radiation damage in glassy silica. The consequences of alpha decay of Es-253 in LaPO₄ nanophases embedded in silica were probed based on excitation of 5f states of Cm³⁺, Bk³⁺, and Es³⁺ ions. The recorded emission spectra and luminescence decays showed that alpha decay of Es-253 ejected Bk-249 decay daughter ions into the surrounding silica and created radiation damage within the LaPO₄ nanophases. This conclusion is consistent with predictions of an ion transport code commonly used to model ion implantation. Luminescence from the ⁶D_7/2 state of Cm³⁺was used as an internal standard. Ion-ion energy transfer dominated the dynamics of the observed emitting 5f states and strongly influenced the intensity of observed spectra. In appropriate sample materials, laser-induced fluorescence provides a powerful method for fundamental investigation of alpha-induced radiation damage in silica.     

Participation of Bao2* in chemiluminescence from low-pressure Ba(g) + O2 flames

New spectioscopic and vibronic population data support the essential correctness of BaO₂^* as the nascent polyatomic emitter and as the precursor to BaO (A ¹Σ⁺ → X¹Σ⁺) and (A' ¹Π → X¹Σ⁺) visible chemiluminescence from metal-rich Ba(g) + O₂ (+ Ar) diffusion flames at 2–350 mTorr- Absolute visible photon yields are reported over this pressure regime.     

Dissociation constants of the ampholyte glycine in 50 mass % methanol-water from 5 to 55°C,with related thermodynamic quantities

The two thermodynamic dissociation constants of glycine at 11 temperatures from 5 to 55°C in 50 mass % methanol-water mixed solvent have been determined from precise emf measurements with hydrogen-silver bromide electrodes in cells without liquid junction. The first acidic dissociation constant (K ₁)for the process HG⁺H⁺+G^± is expressed as a function ofT(^oK) by the equation pK ₁ = 2043.5/T – 9.6504 + 0.019308T. At 25°C, pK ₁is 2.961 in the mixed solvent, as compared with 2.350 in water, with H°=1497 cal-mole^–1, G°=4038 cal-mole^–1, S°=–8.52 cal-°K^–1-mole^–1, and C _p ^o =–53 cal-°K^–1-mole^–1. The second acidic dissociation constant (K ₂)for the process G^±H⁺+G^– over the temperature range studied is given by the equation pK ₂ = 3627.1/T – 7.2371 + 0.015587T. At 25°C, pK ₂is 9.578 in MeOH–H₂O as compared with 9.780 in water, whereas H° is 10,257 cal-mole^–1, G° is 13,063 cal-mole^–1, S° is –9.41 cal-°K^–1-mole^–1, and C _p ^o is –43 cal-°K^–1-mole^–1. The protonated glycine becomes weaker in 50 mass % methanol-water, whereas the second dissociation process becomes stronger despite the lower dielectric constant of the mixed solvent (=56.3 at 25°C).     

EXCITED STATES OF DNA AND ITS COMPONENTS AT ROOM TEMPERATURE—III. SPECTRA, POLARISATION AND QUANTUM YIELDS OF EMISSIONS FROM ApA AND poly rA*

Abstract— Corrected normalised emission spectra from 300 to 480 nm and their polarisation are reported for neutral and poly rA at room temperature. Yields are 4 times (ApA) and 6 times (poly rA) greater than the monomer. Comparison of emission spectra and polarisation spectra demonstrates heterogeneity of emission and, following attempts at spectral synthesis, comparison with experimental reference spectra allows the observed total emission spectra to be resolved into four components assigned as I monomer-like emission, II excimer fluorescence, HI monomer phosphorescence, IV excimer phosphorescence; the polarisation of the excimer fluorescences of ApA and poly rA are deduced. The observations can be understood quantitatively using a simple stacking model with excimer emissions originating in the stacked components. Quantitative differences between ApA and poly rA are due to their different hypochromism and extent of stacking. Differences of polarisation are attributed to different stacking geometries, and the directional properties of the transition moment suggest that the excimer fluorescence is largely charge-resonance in nature.     

The syntheses of pyridazino[1,2-a] pyridazine derivatives of furan,pyridazine and pyrrole by diels-alder reactions

Diels-Alder adducts were formed in the lead tetraacetate oxidations of substituted cyclic hydrazides of furan, pyridazine and pyrrole dicarboxylic acids in the presence of 1,3-cyclo-hexadiene or 1,3-cyclopentadiene. The products resulting were furo[3,4-g]pyridazino[1,2-a]-pyridazine-6,10-diones, pyridazino[4,5-g]pyridazino[1,2-a]pyridazine-6,11-diones, and pyrrolo-[3,4-g]pyridazino[1,2-a]pyridazine-6,10-diones, respectively. Some hydrogenations and ring opening reactions were studied.     

Studies directed toward the total synthesis of discodermolide: asymmetric synthesis of the C1-C14 fragment

[structure: see text] A convergent and stereoselective assembly of the C1-C14 subunit of marine natural product (+)-discodermolide has been completed. The approach employs chiral allylsilane bond construction methodology to establish four of the eight stereogenic centers. Key fragment coupling is achieved via an efficient stereoselective acetate aldol reaction between C1-C6 and C7-C14 subunits.     

Steric mode of enzymic hydroxylation at primary carbon atoms: Hydroxylation of (1R)- and (1S)-[1-3H, 2H, 1H][1-14C]-octanes by Pseudomonas Oleovorans

(1R)- and (1S) [1-³H, ²H, ¹H]-octanes and mixed with [1-¹⁴C]-octane, were synthesized. The mixed samples were incubated with homogenats of P. oleovorans strain TF4-1L and the biosynthesized mixtures of octanols isolated. It was shown that mainly the achiral termini [-C¹H₃] were hydroxylated and that chiral methyls were oxygenated to the extent of 20–30%. In all instances the products derived from hydroxylation at the chiral methyls [-C-³H, ²H, ¹H] were mixtures of (1R)- and (1S)-octanols, the major component of which was the alcohol obtained by displacement of ¹H. The results indicate that hydroxylation proceeded with a normal isotope effect k_h>k_d>k_t. The amount of (1R)-octanol in the mixtures of octanols derived from (1R)- and (1S)-octane was determined. It was found that the C-1 hydroxylation of octane proceeded with retention, i.e. the incoming hydroxyl assumed the orientation of the displaced hydrogen (or isotopic hydrogen) atom.