Controlling electron delocalisation in constrained N,N′-dimethyl-4,4′-bipyridinium dications

The synthesis is described of two N,N′-dimethyl-4,4′-bipyridinium salts for which the two pyridinium rings are connected via varying length alkoxy chains attached at the 3,3′-locations.     

Quantitation of SU1 1248, an oral multi-target tyrosine kinase inhibitor, and its metabolite in monkey tissues by liquid chromatograph with tandem mass spectrometry following semi-automated liquid-liquid extraction

SU11248 is a potent inhibitor of PDGFR, VEGFR, KIT, and Flt3, and is currently under Phase I clinical evaluation as an anticancer drug. A sensitive and specific analytical method for the quantitation of SU11248 and its metabolite in several monkey tissues (liver, kidney, brain and white fat) using LC-MS-MS following semi-automated liquid-liquid extraction (LLE) was developed and validated. Amounts of 50 mg of tissue were homogenized using an ultrasonic processor. After addition of the stable labelled internal standard (IS) and ammonium hydroxide (0.3%), samples were extracted with 2.5 ml of tert-butyl methyl ether. Following centrifugation, aliquots of 1.8 ml of the organic phase were transferred into a 96-well plate. The Packard Multiprobe II robotic liquid handler was used to perform all steps mentioned above. The organic phase was dried and the residue was reconstituted with 800 microl of 15 mM ammonium formate buffer solution (pH 3.25) using a Tomtec Quadra 96 workstation. Aliquots of 10 microl of the resulting solution were injected into the LC-MS-MS system. A Symmetry Shield C8 column (50 mm x 2.1 mm, 3.5 microm) was used to perform the chromatographic analysis. The mobile phase was 15 mM ammonium formate buffer solution (pH 3.25)-acetonitrile (74:26 (v/v)) with a flow-rate of 0.35 ml/min. Retention times of the metabolite and SU11248 were about 2.5 and 3.5 min, respectively. Total cycle time was 5 min. MS detection used the Applied Biosystems-MDS Sciex API 3000 with TurbolonSpray interface and multiple reaction monitoring (MRM) operated in positive ion mode. The method was validated for both compounds over the calibration range of about 2 and 2000 ng/g. The suitability and robustness of the method for in vivo samples were confirmed by analysis of monkey tissues from animals dosed with SU11248.     

Amine catalysis in phosphoryl transfer from 2,4-dinitrophenyl phosphate in aprotic and protic solvents

Reactions of tetra-n-butylammonium 2,4-dinitrophenyl hydrogen phosphate, (ArPH)^?(R₄N)⁺, in aprotic and protic solvents, in the absence and in the presence of alcohols or water, ROH, are compared with analogous reactions of the salt in the presence of hindered and unhindered amines, e.g. diisopropylethyl amine and quinuclidine. Similar studies are performed with the acid, ArPH₂, in the presence of variable amounts of amines. The release of phenol and the fate of the phosphorus compounds are followed by ¹H and ³¹P NMR spectrometry. In the absence of free unhindered amine, reactions of the monoanion are relatively slow, sensitive to steric hindrance in the alcohol, and incapable of producing t-butyl phosphate from t-butanol; reactions of the dianion are relatively fast, insensitive to steric hindrance in the alcohol, and produce t-butyl phosphate. In the presence of free unhindered amine, reactions of the monoanion are relatively fast but still sensitive to steric hindrance in the alcohol, and hence do not produce t-butyl phosphate. The intermediate CH(CH₂CH₂)₃⁺NP(O)(OH)O^? is detected in the presence of quinuclidine. Reactions of the dianion in the presence of unhindered amines are analogous to those observed in the presence of hindered amines. The uncatalyzed and the nucleophilic amine-catalyzed reactions of the monoanion are assumed to proceed via oxyphosphorane, P(5), intermediates. The dianion reactions, which are not susceptible to nucleophilic catalysis, are assumed to proceed via the monomeric metaphosphate ion intermediate, PO₃^?. Significant effects related to solvent properties are observed in these reactions.     

Mass spectra of perfluoroalkyl and perfluoroalkylether nitriles and acyl halides

Electron impact fragmentation patterns were obtained for perfluoroalkylether nitriles, C,F,O[CF(CF₃)CFIO]ICF(CF₃)CN (x = 1 and 2), perfluoroalkylether acyl halides, CSF,OCF(CF,)-CF₂OCF(CF₃)COX (X = F and Cl), n-perfluorooctanonitrile and n-perfiuorooctanoyl chloride. The perfluoroalkyl and perfluoroalkylether nitriles afforded ions characteristic of the nitrile function. The major fragment from the acyl chlorides was the [COClJ]+ ion; the presence of chlorine was evidenced also by rearrangement ions of the general form [R_fCl] t. The perfluoroalkylether compounds appeared to undergo a typical fragmentation governed by the cleavage of the carbon-oxygen bond.     

Enzymatic surface modification of Kevlar fibers

Horseradish peroxidase catalyzed grafting of acrylamide (AM) onto Kevlar fibers has been studied. The modified fiber has been characterized with scanning electron microscopy (SEM), elemental analysis and the grafting yield. From the SEM micrographs, the surface of the grafted Kevlar fiber is rougher than that of the untreated fiber, and the elemental analysis indicated that the nitrogen content of the treated fibers is higher than that of the untreated fiber. All the results suggested that AM must have been grafted onto the Kevlar surface through HRP-mediated radical initiated grafting reaction. The probably mechanism of HRP catalyzed grafting of AM onto Kevlar surface is proposed.     

Total synthesis of (+/-)-perophoramidine

The first total synthesis of racemic perophoramidine is described. The key step features the highly stereoselective introduction of the vicinial quaternary centers via base-promoted carbon-carbon bond formation between a 3-alkylindole and a 3-bromo-3-alkylindolin-2-one. This transformation presumably proceeds through a conjugate addition or Diels-Alder cycloaddition of the 3-alkylindole with a 3-alkylindol-2-one intermediate.     

Host-guest interactions template: the synthesis of a [3]catenane

Formation of a [3]catenane containing dibenzo-24-crown ether wheels and a large dipyridiniumethane ring is templated by formation of a host-guest adduct between the [3]catenane and the external crown ether.     

Development of novel antioxidants: design,synthesis, and reactivity

We are attempting to develop novel synthetic antioxidants aimed at retarding the effects of free-radical induced cell damage. In this paper we discuss the design strategy and report the synthesis of seven novel antioxidants, including six catechols and a benzylic phenol. The bond dissociation enthalpy (BDE) for the most active (weakest) OH bond in each molecule was calculated by theoretical methods, as well as the BDE for the semiquinone radical. Reaction rates with the nitrogen-centered free radical DPPH(*) were measured in ethyl acetate. The log of k(DPPH) for bimolecular reaction correlated well with the primary BDE. The correlation between rate constants and calculated BDEs shows that the BDE is a good predictor of antioxidant activity with DPPH(*), suggesting that our design criteria are useful and that these compounds should undergo further testing in cell cultures and in animal models.     

Electrospun cellulose acetate fibers: effect of solvent system on morphology and fiber diameter

This paper reports an investigation of the effects of solvent system, solution concentration, and applied electrostatic field strength (EFS) on the morphological appearance and/or size of as-spun cellulose acetate (CA) products. The single-solvent systems were acetone, chloroform, N,N -dimethylformamide (DMF), dichloromethane (DCM), methanol (MeOH), formic acid, and pyridine. The mixed-solvent systems were acetone–DMAc, chloroform–MeOH, and DCM–MeOH. Chloroform, DMF, DCM, MeOH, formic acid, and pyridine were able to dissolve CA, forming clear solutions (at 5% w/v), but electrospinning of these solutions produced mainly discrete beads. In contrast, electrospinning of the solution of CA in acetone produced short and beaded fibers. At the same solution concentration of 5% (w/v) electrospinning of the CA solutions was improved by addition of MeOH to either chloroform or DCM. For all the solvent systems investigated smooth fibers were obtained from 16% (w/v) CA solutions in 1:1, 2:1, and 3:1 (v/v) acetone–DMAc, 14–20% (w/v) CA solutions in 2:1 (v/v) acetone–DMAc, and 8–12% (w/v) CA solutions in 4:1 (v/v) DCM–MeOH. For the as-spun fibers from CA solutions in acetone–DMAc the average diameter ranged between 0.14 and 0.37 μm whereas for the fibers from solutions in DCM–MeOH it ranged between 0.48 and 1.58 μm. After submersion in distilled water for 24 h the as-spun CA fibers swelled appreciably (i.e. from 620 to 1110%) but the physical integrity of the fibrous structure remained intact.     

Studies on metal — protein interactions: Inter-comparison among various approaches

Binding ability of mercury, thallium, lead and bismuth with Erythrina variegata seed protein have been investigated using tracer packet technique. Due to the lack of standard methods, inter-comparisons have been made among three different approaches, like trichloroacetic acid (TCA) precipitation, isoelectric precipitation and dialysis of protein after incubation with the metals. Good agreement was observed for all the cases except that of lead.