Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Specific MARY spectrum from radical anion of pentafluorobenzene

The paper presents the first resolved experimental magnetically affected reaction yield (MARY) spectrum for a system with nonequivalent nuclei, radical anion of pentafluorobenzene. This observation dispels the common apprehension that because of a rather involved energy level layout a system with not all nuclei magnetically equivalent cannot produce resolved MARY lines in nonzero fields, and greatly, increases the practical scope of level-crossing techniques for studies of spin-correlated radical pairs. The experimental finding is supported by schemes of energy levels calculated for this system.     

A real time method for surface cleanliness measurement

The measurement of surface cleanliness is a significant problem in many industrial and technological processes. Existing methods are based on laboratory procedures, that are not performed in real time, can not be automated, and usually are restricted to a small portion of the sample. In this study we describe a new method for real time measurement of the amount of surface dirt or contamination deposited on a surface. It relies on the ablation of the surface dirt film by means of a short laser pulse, and the subsequent measurement of the emitted sound. The intensity of the sound is proportional to the amount of surface dirt and provides a direct measurement of the cleanliness of the surface. We also developed a reference sample for calibration, based on a uniform distribution of dots printed on white paper. The density and the dot size can be easily modified providing a homogeneous, uniform and reproducible standard for the measurement. Based on this method, we designed, developed and patented the first industrial instrument for on-line determination of the degree of cleanliness of manufactured cold rolled steel plate bobbins. PACS 79.20.D; 81.70.C; 42.62.     

Analysis of some medicinal plants in South-western Nigeria using PIXE

Summary Analysis of thirteen medicinal plants of various biological activities commonly used in South-western Nigeria was carried out using PIXE technique. Nine of these plants are anti-cancer while four are antimicrobial. PIXE measurements were carried out using collimated proton beams delivered by the 2. 5 MV AN 2000 Van de Graaff accelerator at the Istituto Nazionale di Fisica Nucleare (INFN), (LNL) Legnaro, (Padova), Italy. The results showed the presence of twenty three different elements in the plants and none of them contains any toxic heavy metals. Only Chenopodium ambrosioides showed detectable levels of selenium which is considered important in cancer prevention.     

Synthesis of water-soluble fullerene-containing vinyl polymers by low-temperature radiation-induced living polymerization

Water-soluble polymers of acrylamide and acrylic acid that contain fullerene (more than 90% C₆₀) have been prepared by the low-temperature radiation-induced living polymerization. In the absorption spectra of these polymers, a monotonically decaying absorption typical of the covalently bound fullerene or its associates is observed in the range 240–700 nm. The radiation initiation of the process allows preparation of high-purity polymers useful for designing medicinal preparations.     

BF3-doped polyaniline: A novel conducting polymer

We review the unusual structural, transport and magnetic properties of highly conducting polyaniline, doped with boron trifluoride. Our studies establish the unique conducting state of this system, which is in distinct contrast with the conventional proton-doped polyaniline samples.     

Solution and solid-state NMR characterization of poly(p-phenylene terephthalamide)

NMR spectroscopy has been used to characterize poly(p-phenylene terephthalamide) in the solid state and in solution in sulfuric acid. Solid-state ¹³C NMR spectra illustrate that the chain structure is highly ordered in the solid state and is of lower symmetry than in solution. Solid-state ¹³C and ¹H NMR results show that only very limited motion takes place over the temperature range of ?170 to +200°C. High-resolution NMR spectra can be observed only in very dilute isotropic solutions because it is the overall rotational motion of the polymer, not segmental motion, that averages the nuclear spin interactions to their isotropic values. These results demonstrate that previous solution NMR studies that were interpreted as reflecting the presence of isotropic and anisotropic high-molecular-weight polymer phases over a wide range of concentrations actually are representative of polymer degradation.     

Representation of Cubic Lattices by Symmetric Implication Algebras

In this paper a cubic lattice L(S) is endowed with a symmetric implication structure and it is proved that L(S) \ {0} is a power of the three-element simple symmetric implication algebra. The Metropolis–Rota’s symmetries are obtained as partial terms in the language of symmetric implication algebras.     

Electron-confined LO-phonon scattering in GaAs-Al0.45Ga0.55As superlattice

We develop a theoretical model to the scattering time due to the electron-confined LO-phonon in GaAs-Al_xGa_1-xAs superlattice taking into account the sub-band parabolicity. Using the new analytic wave function of electron miniband conduction of superlattice and a reformulation slab model for the confined LO-phonon modes, an expression for the electron-confined LO-phonon scattering time is obtained. In solving numerically a partial differential equation for the phonon generation rate, our results show that forx = 0.45, the LO-phonon in superlattice changes from a bulk-like propagating mode to a confined mode. The dispersion of the relaxation time due to the emission of confined LO-phonons depends strongly on the total energy.     

Cathodoluminescence study of extended defects in hydrothermal ZnO crystals

Understanding the luminescence of ZnO is very important for some applications. In spite of the many studies carried out, there are still some points concerning the origin of some of the luminescence emissions in ZnO crystals that require additional study; in particular, the role of extended defects remains to be a matter of controversy. We present here a cathodoluminescence analysis of the defects generated by Vickers indentation in hydrothermal HTT crystals. Special emphasis was paid to the luminescence band peaking around 3.3 eV. The origin of this band is a matter of controversy, since it has been related to different causes, extended defects being one of the candidates for this emission. The CL images were acquired around crystal defects. It is observed that the 3.3 eV emission is enhanced around the crystal defects; though it is also observed, but weaker, out of the defect regions, which suggests that there exist two luminescence emissions peaking very close to 3.3 eV. The two emissions, one related to structural defects and the other to the LO phonon replica of the free excitonic band, appear very close each other and their relative intensity should determine the shape of the spectrum.