Role of poly(diallyldimethylammonium chloride) in selective polishing of polysilicon over silicon dioxide and silicon nitride films

A cationic polymer, poly(diallyldimethylammonium chloride), or PDADMAC (MW ≈ 200,000), at a concentration of 250 ppm was used to enhance polysilicon removal rates (RRs) to ～600 nm/min while simultaneously suppressing both silicon dioxide and silicon nitride RRs to <1 nm/min, both in the absence or in the presence of ceria or silica abrasives during chemical mechanical polishing (CMP). These results suggest that aqueous abrasive-free solutions of PDADMAC are very attractive candidates for several front-end-of-line (FEOL) CMP processes. Possible mechanisms for the enhancement of poly-Si RR and the suppression of oxide and nitride RRs are proposed on the basis of the RRs, contact angle data on poly-Si films, zeta potentials of polishing pads, polysilicon films, silicon nitride particles, and silica and ceria abrasives, thermogravimetric analysis, and UV-vis spectroscopy data.     

Intercompany Study to Evaluate the Robustness of Capillary Isoelectric Focusing Technology for the Analysis of Monoclonal Antibodies

Interlaboratory comparisons are essential to bringing emerging technologies into biopharmaceutical industry practice and regulatory acceptance. As a result, an international team including 12 laboratories from 10 independent biopharmaceutical companies in the United States and Switzerland was formed to evaluate the precision and robustness of capillary isoelectric focusing (CIEF) to assess the charge heterogeneity of monoclonal antibodies. The different laboratories determined the apparent pI and the relative distribution of the charge isoforms of a representative monoclonal antibody (rMAb) sample using the same CIEF method. Statistical evaluation of the data was performed to determine within and between-laboratory consistencies and outlying information. The apparent pI data generated for each charge variant peak showed very good precision between laboratories with percentage of RSD values of ??0.5%. Similarly, the percentage of RSD for the rMAb charge variants percent peak area values are ??4.4% across different laboratories with different analysts using different lots of ampholytes and multiple instruments. Taken together, these results validate the appropriate use of CIEF in the biopharmaceutical industry in support of regulatory submissions.     

Synthesis of 5‐aryl and 5‐amidocamptothecins

A variety of 5‐aryl‐(20S)‐camptothecin derivatives were synthesized by the reaction of 5‐hydroxy‐(20S)‐camptothecin with aromatic hydrocarbons under Friedel‐Craft reaction conditions in moderate to good yield as diastereomeric pairs. The methodology was then extended for the synthesis of 5‐amido‐(20S)‐camptothecin derivatives by reacting 5‐hydroxy‐(20S)‐camptothecin with alkyl and aryl nitriles under Ritter type reaction conditions. The reaction is presumed to proceed through an iminium ion intermediate under Friedel Craft and Ritter type reaction condition, which is further trapped by nucleophile present in the reaction medium. J. Heterocyclic Chem., 00 , 00 (2011).     

Development and validation of LC‐MS/MS method for the estimation of β‐hydroxy‐β‐methylbutyrate in rat plasma and its application to pharmacokinetic studies

A simple, sensitive and specific high‐performance liquid chromatography mass spectrometry (LC‐MS/MS) method was developed and validated for the quantification of β‐hydroxy‐β‐methyl butyrate (HMB) in small volumes of rat plasma using warfarin as an internal standard (IS). The API‐4000 LC‐MS/MS was operated under the multiple reaction‐monitoring mode using the electrospray ionization technique. A simple liquid–liquid extraction process was used to extract HMB and IS from rat plasma. The total run time was 3 min and the elution of HMB and IS occurred at 1.48 and 1.75 min respectively; this was achieved with a mobile phase consisting of 0.1% formic acid in a water–acetonitrile mixture (15:85, v/v) at a flow rate of 1.0 mL/min on a Agilent Eclipse XDB C₈ (150 × 4.6, 5 µm) column. The developed method was validated in rat plasma with a lower limit of quantitation of 30.0 ng/mL for HMB. A linear response function was established for the range of concentrations 30–4600 ng/mL (r > 0.998) for HMB. The intra‐ and inter‐day precision values for HMB were acceptable as per Food and Drug Administration guidelines. HMB was stable in the battery of stability studies, viz. bench‐top, autosampler freeze–thaw cycles and long‐term stability for 30 days in plasma. The developed assay method was applied to a bioavailability study in rats. Copyright © 2012 John Wiley & Sons, Ltd.     

A Clean and Expedient Synthesis of Pyrido[1,4]oxazepino Spiropyrrolidines Through One-Pot,Three-Component [3 + 2] Cycloaddition Reaction

One-pot three component synthesis of novel pyrido[1,4]-oxazepine fused spiropyrrolidines has been accomplished in good yields by 1,3-dipolar cycloaddition reaction of azomethine ylide, derived from paraformaldehyde and sarcosine with (E)-4-benzylidene-hexahydro-1H-pyrido[2,1-c][1,4]-oxazepine-3(7H)-one as dipolarophiles derived from Baylis-Hillman adducts. The effect of solvent on the [3 + 2]-cycloaddition reaction is also studied.     

Microwave assisted synthesis of thiazolo[3,2‐b][1,2,4]‐triazoles containing 1,8‐naphthyridine moiety

A simple and efficient protocol for the synthesis of 5‐aryl‐2‐(2‐substituted‐1,8‐naphthyridin‐3‐yl)‐thiazolo[3,2‐b][1,2,4]triazoles ( 4 ) is achieved by cyclocondensation of 3‐(2‐substituted‐1,8‐naphthyridin‐3‐yl)‐1,2,4‐triazoles ( 3 ) with α‐halogenoketones in anhyd. methanol under microwave irradiation. The products are obtained in good yields and in a state of high purity.     

η4‐HBCC‐σ,π‐Borataallyl Complexes of Ruthenium Comprising an Agostic Interaction

Thermolysis of [Cp*Ru(PPh₂(CH₂)PPh₂)BH₂(L₂)] 1 (Cp*=η⁵‐C₅Me₅; L=C₇H₄NS₂), with terminal alkynes led to the formation of η⁴‐σ,π‐borataallyl complexes [Cp*Ru(μ‐H)B{R‐C=CH₂}(L)₂] ( 2 a – c ) and η²‐vinylborane complexes [Cp*Ru(R‐C=CH₂)BH(L)₂] ( 3 a – c ) ( 2 a , 3 a : R=Ph; 2 b , 3 b : R=COOCH₃; 2 c , 3 c : R=p‐CH₃‐C₆H₄; L=C₇H₄NS₂) through hydroboration reaction. Ruthenium and the HBCC unit of the vinylborane moiety in 2 a – c are linked by a unique η⁴‐interaction. Conversions of 1 into 3 a – c proceed through the formation of intermediates 2 a – c . Furthermore, in an attempt to expand the library of these novel complexes, chemistry of σ‐borane complex [Cp*RuCO(μ‐H)BH₂L] 4 (L=C₇H₄NS₂) was investigated with both internal and terminal alkynes. Interestingly, under photolytic conditions, 4 reacts with methyl propiolate to generate the η⁴‐σ,π‐borataallyl complexes [Cp*Ru(μ‐H)BH{R‐C=CH₂}(L)] 5 and [Cp*Ru(μ‐H)BH{HC=CH‐R}(L)] 6 (R=COOCH₃; L=C₇H₄NS₂) by Markovnikov and anti‐Markovnikov hydroboration. In an extension, photolysis of 4 in the presence of dimethyl acetylenedicarboxylate yielded η⁴‐σ,π‐borataallyl complex [Cp*Ru(μ‐H)BH{R‐C=CH‐R}(L)] 7 (R=COOCH₃; L=C₇H₄NS₂). An agostic interaction was also found to be present in 2 a – c and 5 – 7 , which is rare among the borataallyl complexes. All the new compounds have been characterized in solution by IR, ¹H, ¹¹B, ¹³C NMR spectroscopy, mass spectrometry and the structural types were unequivocally established by crystallographic analysis of 2 b , 3 a – c and 5 – 7 . DFT calculations were performed to evaluate possible bonding and electronic structures of the new compounds.     

Efficient Synthesis,Characterization, In Vitro Antibacterial and Antifungal Activity Study and Computational Tool for Prediction of Molecular Properties of Some Novel Schiff's Base via Betti's Protocol and Azetidinones

Series of new substituted pyrazolone derivatives via Betti's condensation reaction of pyrazolone and different aldehydes has been reported successfully under ambient reaction conditions. The structural elucidation of newly synthesized compounds was done using analytical and spectroscopic tools such as elemental analysis, ¹H NMR, ¹³C NMR, and mass spectroscopy. Physicochemical parameters, toxicity profiles and drug likeness properties were studied using various bioinformaticals tools like Osiris and molinspiration. These results viz., the good correlations between the inhibitory activities and the computational values make the molecules available for future protein–ligand interaction studies. It further provided useful information in understanding the structural and chemical features of the drug in designing and finding new potential inhibitors.     

Structure elucidation of thermal degradation products of amlodipine

Thermal degradation of amlodipine base causes intramolecular reactions affording three cyclic products, referred to as AMLDEG-I, AMLDEG-II, and AMLDEG-III, respectively. AMLDEG-I is a cyclized product formed by intramolecular elimination of ammonia from amlodipine. AMLDEG-II is a positional isomer of AMLDEG-I. AMLDEG-III is also intramolecular cyclisation product. The three degradation products were isolated by column chromatography and characterized by FT-IR and 1H and 13C NMR spectroscopy data. The AMLDEG-III was crystallized and its structure was solved by single crystal X-ray diffraction (SXRD).