Application of thermal analysis to carbon black-elastomer systems

In this study a relationship between the surface and textural properties of carbon blacks and the gasification process induced thermally in air is noted. A temperature jump method was used to follow the gasification in air and to establish the relevant Arrhenius parameters. This can be associated with the activity of ‘basal’ plane carbon atoms as well as ‘edge’ carbon atoms at the surface. This is based on a model of carbon black structure consisting of the irregular packing of small graphite carbon structures. The carbon black surface was measured using a single measurement of adsorption based essentially on the BET volumetric method. The carbon black surface had a rate of oxidation per unit are which clearly indicated that the lower area carbon blacks had a predominately active area of ‘edge’ atoms at the surface while the surface of the higher area carbon blacks had a predominate amount of ‘basal’ plane graphite carbon atoms.     

Synthesis of Novel α‐(Acyloxy)‐α‐(quinolin‐4‐yl)acetamides by a Three‐Component Reaction between an Isocyanide,Quinoline‐4‐carbaldehyde,and Arenecarboxylic Acids

Novel α‐(acyloxy)‐α‐(quinolin‐4‐yl)acetamides were synthesized by the Passerini three‐component reaction between an isocyanide, quinoline‐4‐carbaldehyde, and arenecarboxylic acids in H₂O. The reactions were carried out in one pot at room temperature with quantitative yields.     

1-Methylimidazolium tetrafluoroborate [Hmim][BF4]: an efficient acidic ionic liquid catalyst for insertion of α-diazo compounds into the N–H bonds of amines

The reusable acidic ionic liquid, 1-methylimidazolium tetrafluoroborate [Hmim][BF₄], was found to be an effective catalyst for the insertion of α-diazoacetate into the N–H bonds of amines. The corresponding products were obtained in good yields and short reaction times via a simple procedure. The catalyst could be recycled and reused without any noticeable decrease in its activity.     

An efficient four-component synthesis of dithiocarbamate derivatives

An environmentally benign, one-pot, four-component synthesis of chemically and pharmaceutically interesting dithiocarbamate derivatives is reported. The one-pot reaction of various aromatic aldehydes, ketones, aliphatic amines, and carbon disulfide, in the presence of potassium hydroxide in urea-choline chloride deep eutectic solvent or ethanol, leads to the corresponding dithiocarbamates in good to excellent yields. This method provides a convenient and time-saving strategy, with a simple work-up procedure.     

Copper/Graphene/Clay Nanohybrid: A Highly Efficient Heterogeneous Nanocatalyst for the Synthesis of Novel 1,2,3‐Triazolyl Carboacyclic Nucleosides via ‘Click’ Huisgen 1,3‐Dipolar Cycloaddition

A very mild and highly efficient synthesis of some novel 1H‐1,2,3‐triazolyl carboacyclic nucleosides via a ‘Click’ Huisgen cycloaddition of N‐propargyl nucleobases and azido alcohols using Cu/aminoclay/reduced graphene oxide nanohybrid (Cu/AC/r‐GO nanohybrid) as nanocatalyst is described. The preparation and characterization of Cu/AC/r‐GO nanohybrid are discussed. This catalyst was characterized by X‐ray diffraction, FT‐IR, TEM, and energy‐dispersive analysis of X‐ray techniques. Cu/AC/r‐GO nanohybrid is a stable and highly efficient heterogeneous nanocatalyst that can be easily prepared, used, and restored from the reaction mixture by simple filtration, and reused for many consecutive trials without significant decrease in activity.     

PTSA catalyzed simple and green synthesis of benzothiazole derivatives in water

Abstract  

p-Toluenesulfonic acid (10 mol%) was found to be an effective and efficient catalyst for the synthesis of 2-substituted benzothiazoles from aromatic aldehydes and 2-aminothiophenol in moderate to excellent yields in water. This method provides a simple and efficient protocol in terms of mild reaction conditions, clean reaction profiles, small quantity of catalyst, and simple workup procedure.     

Simultaneous determination of cobalt, nickel and palladium in micellar media using partial least square regression and direct orthogonal signal correction

A simple, novel and sensitive spectrophotometric method was described for the simultaneous determination of cobalt, nickel and palladium. The method is based on the complex formation of Co, Ni and Pd with 1-(2-pyridylazo)-2-naphtol (PAN) in Tween-80 micellar media. All factors affecting on the sensitivity were optimized and the linear dynamic range for determination of Co, Ni and Pd was found. The experimental calibration matrix was designed by measuring the absorbance over the range of 520-700 nm for 21 samples of 0.10-1.0, 0.050-0.50 and 0.050-4.0 microg ml(-1) of Co, Ni and Pd, respectively. The partial least square (PLS) modeling based on singular value decomposition (SVD) was used for the multivariate calibration of the spectrophotometric data. The direct orthogonal signal correction was used for pre-processing of data matrices and the prediction results of model, with and without using direct orthogonal signal correction, were statistically compared. The effects of various anions and cations on selectivity of the method were investigated. The proposed method was successfully applied to the determination of Co, Ni and Pd in water and alloy samples.     

Ultrasonic‐Assistance and Aging Time Effects on the Zeolitation Process of BZSM‐5 Zeolite

The isomorphic substitution of boron into ZSM‐5 zeolite under static hydrothermal condition was investigated. Evaluation of hydrothermal synthesis of BZSM‐5 was performed by treating the synthesis mixture by different aging processes, namely, ultrasonic, static, stirring, and microwave‐assisted aging prior to the conventional hydrothermal treatment. The synthetic processes with different techniques of aging prior to the onset of conventional hydrothermal crystallization were compared with a process without any prior aging. The obtained results showed that the ultrasonic and microwave assisted aging shortened the crystallization time and altered the crystal size and the morphology of the obtained products. The characteristics of the synthesized products were obtained by FT‐IR spectroscopic, XRD and SEM techniques.     

A deterministic,multi-item inventory model with supplier selection and imperfect quality

This paper considers the scenario of supply chain with multiple products and multiple suppliers, all of which have limited capacity. We assume that received items from suppliers are not of perfect quality. Items of imperfect quality, not necessarily defective, could be used in another inventory situation. Imperfect items are sold as a single batch, prior to receiving the next shipment, at a discounted price. The demand over a finite planning horizon is known, and an optimal procurement strategy for this multi-period horizon is to be determined. Each of products can be sourced from a set of approved suppliers, a supplier-dependent transaction cost applies for each period in which an order is placed on a supplier. A product-dependent holding cost per period applies for each product in the inventory that is carried across a period in the planning horizon. Also a maximum storage space for the buyer in each period is considered. The decision maker, the buyer, needs to decide what products to order, in what quantities, with which suppliers, and in which periods. Finally, a genetic algorithm (GA) is used to solve the model.     

A green and highly efficient alkylation of thiols in water

An environmentally benign and efficient process for the preparation of thioethers was developed by simple and practical reactions of alkyl halides and thiols in water in the presence of K₂CO₃ or Et₃N in very high yields. The reaction of aryl, alkyl, aliphatic and hindered thiols with various alkyl halides gave the corresponding products with significant advantages such as high conversions, short reaction time, mild reaction conditions, and low cost, simple workup with good to quantitative yields.