Stereo- and Regiochemical Effect of N,N-Dialkylamide Extractants on the Speciation of Pu Complexes

The relationship between extractant stereochemistry and their extraction performance has only poorly been established. In order to address a part of this concern, we investigated the Pu(IV) liquid-liquid extraction (LLE) by using the N,N-di-(2-ethylhexyl)butyramide (DEHBA), as well as those of its position isomers. DEHBA (ββ-isomer) and N-(2-ethylhexyl)-N-(oct-3-yl)butyramide (EHOBA or αβ-isomer) were synthesized as a mixture of stereoisomer or stereoenriched (R,S)- and (S,S)-diastereoisomers, and were all assessed for Pu^IV LLE. The results showed that both the position and the stereoisomerism of the aliphatic substituents affect Pu^IV complexation and extraction. We found that Pu extraction is lowered by factor 2 to 4 when the ethyl branching group is closer to the complexing site. UV-vis spectroscopy showed that this extraction decrease was affected by steric hindrance inducing a deprivation of Pu inner sphere complex. Effect of stereoisomerism is highlighted for branching closer to the complexing site (α-position). Enantiopure DEHBA stereoisomers provided similar Pu extraction, whereas a slight decrease could be noticed for the more cluttered stereoenriched (αβ)-isomers, which was also concomitant with a smaller population of inner sphere complex. In contrast, the stereoisomers mixture led to a strong decrease of Pu extraction because of an antagonistic association in the mixed complexes.     

Cover Feature: Copper and Nickel Complexes of Oxamate−Phenol Containing Ligands: A Structural Dichotomy in Oxidized Species (Eur. J. Inorg. Chem. 15/2023)

The copper and nickel complexes of two tetradentate ligands derived from bis(aminophenol) and bis(phenol) architectures connected by an oxamate linker were isolated. Depending on the metal and ligand, the complex is isolated with either an intact (deprotonated) ligand ( 1²⁻ ), one-electron oxidized ligand ( 2⁻ ) or quinone form ( 3 ). Surprisingly, the Mannich base is easier to oxidize than the amidophenol derivatives. The complexes were characterized by X-ray diffraction, cyclic voltammetry, UV-Vis-NIR and EPR spectroscopies. Complex 1 shows two reversible oxidation waves assigned to the successive iminosemiquinone/aminophenolate redox systems. Complex 2⁻ shows an intense NIR feature, as well as an EPR signal at g_iso=2.043, consistent with a metallic contribution to the main ligand radical SOMO. Complex 3 shows the typical feature of an isolated Cu(II) complex. Spectro-electrochemistry coupled to DFT calculations demonstrate a ligand-centered oxidative redox chemistry for all the complexes.     

Bromine Adsorption and Thermal Stability on Rh(111): A Combined XPS,LEED and DFT Study

This study addresses a fundamental question in surface science: the adsorption of halogens on metal surfaces. Using synchrotron radiation-based high-resolution X-ray photoelectron spectroscopy (XPS), temperature-programmed XPS, low-energy electron diffraction (LEED) and density functional theory (DFT) calculations, we investigated the adsorption and thermal stability of bromine on Rh(111) in detail. The adsorption of elemental bromine on Rh(111) at 170 K was followed in situ by XPS in the Br 3d region, revealing two individual, coverage-dependent species, which we assign to fcc hollow- and bridge-bound atomic bromine. In addition, we find a significant shift in binding energy upon increasing coverage due to adsorbate-adsorbate interactions. Subsequent heating shows a high thermal stability of bromine on Rh(111) up to above 1000 K, indicating strong covalent bonding. To complement the XPS data, LEED was used to study the long-range order of bromine on Rh(111): we observe a (√3×√3)R30° structure for low coverages (≤0.33 ML) and a star-shaped compression structure for higher coverages (0.33–0.43 ML). Combining LEED and DFT calculations, we were able to visualize bromine adsorption on Rh(111) in real space for varying coverages.     

Bioorthogonal Probes for the Study of MDM2‐p53 Inhibitors in Cells and Development of High‐Content Screening Assays for Drug Discovery

To study the behavior of MDM2‐p53 inhibitors in a disease‐relevant cellular model, we have developed and validated a set of bioorthogonal probes that can be fluorescently labeled in cells and used in high‐content screening assays. By using automated image analysis with single‐cell resolution, we could visualize the intracellular target binding of compounds by co‐localization and quantify target upregulation upon MDM2‐p53 inhibition in an osteosarcoma model. Additionally, we developed a high‐throughput assay to quantify target occupancy of non‐tagged MDM2‐p53 inhibitors by competition and to identify novel chemical matter. This approach could be expanded to other targets for lead discovery applications.     

Magnetically Induced Continuous CO2 Hydrogenation Using Composite Iron Carbide Nanoparticles of Exceptionally High Heating Power

The use of magnetic nanoparticles to convert electromagnetic energy into heat is known to be a key strategy for numerous biomedical applications but is also an approach of growing interest in the field of catalysis. The heating efficiency of magnetic nanoparticles is limited by the poor magnetic properties of most of them. Here we show that the new generation of iron carbide nanoparticles of controlled size and with over 80 % crystalline Fe_2.2C leads to exceptional heating properties, which are much better than the heating properties of currently available nanoparticles. Associated to catalytic metals (Ni, Ru), iron carbide nanoparticles submitted to magnetic excitation very efficiently catalyze CO₂ hydrogenation in a dedicated continuous‐flow reactor. Hence, we demonstrate that the concept of magnetically induced heterogeneous catalysis can be successfully applied to methanation of CO₂ and represents an approach of strategic interest in the context of intermittent energy storage and CO₂ recovery.     

Single‐Face/All‐cis Arene Hydrogenation by a Supported Single‐Site d0 Organozirconium Catalyst

The single‐site supported organozirconium catalyst Cp*ZrBz₂/ZrS (Cp*=Me₅C₅, Bz=benzyl, ZrS=sulfated zirconia) catalyzes the single‐face/all‐cis hydrogenation of a large series of alkylated and fused arene derivatives to the corresponding all‐cis‐cyclohexanes. Kinetic/mechanistic and DFT analysis argue that stereoselection involves rapid, sequential H₂ delivery to a single catalyst‐bound arene face, versus any competing intramolecular arene π‐face interchange.     

Characterization of conformers and dimers of antithrombin by capillary electrophoresis-quadrupole-time-of-flight mass spectrometry

Antithrombin (AT) is a plasma glycoprotein which possesses anticoagulant and anti-inflammatory properties. AT exhibits various forms, among which are native, latent and heterodimeric ones. We studied the potential of capillary electrophoresis-mass spectrometry (CE-MS) using a sheath liquid interface, electrospray ionization (ESI), and a quadrupole-time-of-flight (Q-TOF) mass spectrometer to separate and quantify the different AT forms. For CE separation, a neutral polyvinyl alcohol (PVA) coated capillary was employed. The protein conformation was preserved by using a background electrolyte (BGE) at physiological pH. A sheath liquid of isopropanol-water 50:50 (v/v) with 14 mM ammonium acetate delivered at a flow rate of 120 μL h⁻¹ resulted in optimal signal intensities. Each AT form exhibited a specific mass spectrum, allowing unambiguous distinction. Several co-injection experiments proved that latent AT had a higher electrophoretic mobility (μ_ep) than native AT, and that these conformers could associate to form a heterodimer during the CE analysis. The developed CE-MS method enabled the detection and quantitation of latent and heterodimeric forms in a commercial AT preparation stored at room temperature for three weeks.     

Influence of Structural Features on the Cellular Uptake Behavior of Non‐Targeted Polyester‐Based Nanocarriers

The development of delivery systems efficiently uptaken by cells is of due importance since sites of drug action are generally localized in subcellular compartments. Herein, naked and core–shell polymeric nanoparticles (NPs) have been produced from poly(lactic‐co‐glycolic acid)—PLGA, poly(ethylene oxide)‐b‐poly(ε‐caprolactone)—PEO‐b‐PCL, and poly(ethylene oxide)‐b‐poly(lactic acid)—PEO‐b‐PLA. The nanostructures are characterized and the cellular uptake behavior is evaluated. The data evidence that cellular uptake is enhanced as the length of the hydrophilic PEO‐stabilizing shell reduces and that high negative surface charge restricts cellular uptake. Furthermore, NPs of higher degree of hydrophobicity (PEO‐b‐PCL) are more efficiently internalized as compared to PEO‐b‐PLA NPs. Accordingly, taking into account our recent published results 1 and the findings of the current investigation, there should be a compromise regarding protein fouling and cellular uptake as resistance to nonspecific protein adsorption and enhanced cellular uptake are respectively directly and inversely related to the length of the PEO‐stabilizing shell.

     

Analysis of protamine peptides in insulin pharmaceutical formulations by capillary electrophoresis

Protamines are a group of highly basic peptides that are sometimes added to insulin formulations to prolong the pharmacological action. In this study, different methods were investigated to identify protamine in insulin formulations. Capillary electrophoresis in aqueous and non‐aqueous media was tested to separate these peptides with very close amino acid sequences. Different buffers (phosphate or formate, both acidified) and various additives (principally negatively charged and neutral surfactants) were investigated to optimize peptide separation. Finally, a micellar electrokinetic capillary chromatography method using a capillary of 120 cm effective length and an aqueous background electrolyte made up of 100 mM phosphate buffer (pH 2) and 50 mM Thesit® gave the best results, providing the separation of the four major protamine peptides within 25 min.