Synthesis and characterization of a magnetic semiconductor Na(2)RuO(4) containing one-dimensional chains of Ru(6+)

A new ternary ruthenium oxide Na(2)RuO(4) was prepared and shown to crystallize with a new structure type. Single crystal X-ray diffraction measurements reveal that Na(2)RuO(4) consists of RuO(4) chains made up of RuO(5) trigonal bipyramids by sharing axial corners. Na(2)RuO(4) is a magnetic semiconductor with a variable range hopping behavior, and its molar magnetic susceptibility chi(mol) has a broad maximum at approximately 74 K. The derivative d(chi(mol).T)/dT exhibits a peak at 37.7 K which has been confirmed by heat capacity measurement to be due to long-range antiferromagnetic ordering.     

Gelatine/silicate interactions: from nanoparticles to composite gels

The possibility to design new composites associating biopolymers with mineral phases relies on the understanding and control of their mutual interactions. In this work, aqueous solutions of gelatine and sodium silicate were mixed at pH 5, 37 degrees C and left to stand at 20 degrees C for 1 day. At low gelatine and high silicate contents, precipitates were obtained, containing a fixed silicon/polymer molar ratio. Scanning electron microscopy (SEM) reveals that they are formed of large aggregates of platelets, constituted of closely-packed nanoparticles. For high gelatine contents, composite gels were formed consisting of silica particles dispersed in the biopolymer matrix. Swelling studies indicate that the addition of silica decreases the stability of the gels by inducing gelatine depletion in solution. Similar experiments conducted at pH 7 show that at this pH, silicates are more effective at precipitating gelatine. A model is proposed for the formation of the composites, based on the electrostatic interactions arising between silicates and polymer chains. These results are discussed in the context of hybrid biomaterials design and biosilicification processes.     

Crystallization-induced asymmetric transformation of chiral-at-metal ruthenium(II) complexes bearing achiral ligands

Recently, we observed that the enantiopure Lambda form of the tributylammonium salt of the chiral anion tris[tetrachlorobenzene-1,2-bis(olato)]phosphate, also named Trisphat, was able to induce an efficient resolution of a Delta,Lambda racemic mixture of cis-[Ru(dmp)2(NCCH3)2](PF6)2 (dmp=2,9-dimethyl-1,10-phenanthroline) due to the spontaneous and selective precipitation of the heterochiral pair [Delta-Ru(dmp)2(CH3CN)2][Lambda-Trisphat]2. We report here that the combination of such a stereoselective precipitation process and irradiation results in the quantitative conversion of the initial [Ru(dmp)2(NCCH3)2]2+ racemate into only one of the two enantiomers. This is the first example in inorganic chemistry of an asymmetric transformation that leads to a chiral complex with no chiral ligand. Finally, three new racemic ruthenium bis(diimine) complexes, namely [Ru(dmp)2(NCCH3)Py](PF6)2 (Py=pyridine), [Ru(dmp)2(1,3-diaminopropane)](PF6)2, and [Ru(dmp)2(ethylenediamine)](PF6)2 were synthesized. For all of them, crystallization-induced asymmetric transformation proved to be an efficient way of obtaining the corresponding optically active chiral-at-metal complexes in high yields and with excellent stereoselectivities.     

Effect of Aging on the Mechanical Properties of Polymeric Materials

Abstract

Aging can modify polymer structure at the molecular, macromolecular, and/or the morphological level and thus induce changes in the mechanical properties. Stiffness is generally not modified for nonrubbery materials, except for mass transfer (solvent plasticization or plasticizer loss) in amorphous polymers or phase transfer (crystallization or crystal destruction) in semicrystalline polymers. The most significant modulus changes occur in the radiochemical aging of semicrystalline polymers whose amorphous phase is in the rubbery state. Yield properties generally vary in the same way as stiffness. Physical aging at T < T _g can lead to a significant increase in the yield stress. Very general features can be observed for rupture properties, for instance: 1) Only ultimate elongation ε is a pertinent variable in kinetic studies of aging involving tensile testing and related methods, 2) the amplitude of ε variation for a given degradation conversion is considerably higher for initially ductile materials than for brittle ones, and 3) the rupture envelope σ = f(ε), i.e., the ultimate stress, is often very close to the initial tensile curve except for rubbery materials undergoing predominant crosslinking. The mechanisms of ultimate property changes are reviewed. A kinetic approach is proposed for the very important case of heterogeneous, diffusion-controlled aging.     

Calixarenes as Polyhapto-aromatic Ligands: Alkali Metal Ions and Sulfonated Calixarenes

Crystal structure determinations for the hexarubidium and octacesium derivatives of calix[6]arene hexasulfonic acid, as well as of a new solvate of the pentasodium derivative of calix[4]arene tetrasulfonic acid, and comparison with structural data from the literature for alkali metal complexes of sulfonated calixarenes, have provided further evidence for the importance of interactions with aromatic ~ -electrons for the heavier alkali metal cations. There is evidence as well that this interaction can be enhanced by extended ionization of the sulfonated calixarene.     

Thermal degradation of poly(methyl-n-hexylsilylene)

Thermal degradation of poly(methyl-n-hexylsilane) in the solid state in absence of oxygen reveals formation of a cyclic pentamer between 150 and 250°C. Polymer is gradually degraded to an intermediate molecular weight distribution. The weight average of this new distribution is not only temperature-dependent, but is also a function of viscosity of the polymer and nature of chain ends. As no insolubles or Si? H groups are formed, the degradation mechanism is most likely a back-biting mechanism induced by active chain ends such as silyl anions or Si? Cl rather than a homolytic cleavage of the main chain. A concurrent intramolecular rearrangement reaction is also proposed. Moreover, this study proposes an explanation to the trimodal molecular weight distribution obtained by the Wurtz coupling of dichlorosilanes with molten sodium in refluxing toluene. © 1995 John Wiley & Sons, Inc.     

A theoretical investigation of the enantioselective hydrogenation mechanism of α-ketoesters

The enantioselective hydrogenation of α-ketoesters to α-hydroxyesters over Pt/Al₂O₃ catalysts modified by cinchona alkaloids is an interesting model reaction for the investigation of heterogeneous catalysis capable of producing optically active products. The aim of the present theoretical study is to rationalize the interaction between protonated cinchona alkaloids (modifiers) and methyl pyruvate (substrate) by investigating the possible weak complexes formed by these two species. For this purpose we use molecular mechanics and the AM1 semiempirical method. The optimization leads to two stable forms of the complexes, where the substrate is bound to the modifier via hydrogen bonding between the oxygen of the α-carbonyl of pyruvate and the quinuclidine nitrogen of the alkaloid. In such complexes the methyl pyruvate is transformed into a half-hydrogenated species which can be adsorbed on the platinum surface and, after hydrogenation, leads to methyl lactate product. The results show that adsorption of the complex leading to (R)-methyl lactate is more favorable than that of the corresponding system yielding (S)-methyl lactate, which may be the key for the enantio-differentiation.     

Molecular organization of DHP membrane fragments

The phase transition of dihexadecyl phosphate (DHP) bilayered disks has been studied using EPR spectroscopy. In the acid form of DHP, a phase transition temperature exists, that we have monitored through the spin-spin interaction between the nitroxide molecules at high concentration (8%) in DHP bilayers. This spin-spin interaction is due to the gathering of solutes in a fluid defect of the membrane: the border. The fluorescence quenching of two probes by the nitroxide stearic acids in DHP bilayers has been studied by stationary and time-resolved fluorescence measurements. The quenching process is mainly static. Both magnetic and fluorescent probes are localized in the periphery of the bilayered disks. An erratum to this article is available at .     

Factors controlling the efficiencies of photoinduced electron-transfer reactions

The overall efficiencies of photoinduced electron transfer reactions in polar solvents are usually determined by the efficiency with which separated radical ions are formed from the initially formed geminate radical-ion pairs. These separation efficiencies are determined by the competition between retum electron transfer and separation within the geminate pairs. A method is described for determining whether variations in the quantum yields for formation of separated radical ions are due to changes in the reorganization parameters for the return electron transfer reactions, or to other factors. The use of the method is illustrated in studies of the effects of varying steric bulk and molecular size of the donors, and also in studies of the effect of using a charged sensitizer.     

Chelate-Controlled Asymmetric Synthesis of 2-Substituted 2,3-Dihydropyridin-4(1H)-ones: Synthesis of D- and L-aminodeoxyaltrose derivatives

Asymmetric methylation and phenylation of the chiral pyridinium salt 7 , as well as methylation of chiral pyridinium salt 18 , with Grignard reagents occurred in good yield and with good-to-excellent diastereoselectivities (Schemes 2 and 3, resp.). These results are best explained by assuming chelate control to govern the asymmetric alkylation/arylation process. The minimum-energy conformations of the out-of-plane twisted pyridinium salts 7 and 18 , as determined by the ‘Molecular Simulations Cerius-Dreiding II’ program, are in good agreement with the postulated asymmetric chelate-control mechanism.