Carbon K‐edge spectra of carbonate minerals

Carbon K‐edge X‐ray spectroscopy has been applied to the study of a wide range of organic samples, from polymers and coals to interstellar dust particles. Identification of carbonaceous materials within these samples is accomplished by the pattern of resonances in the 280–320 eV energy region. Carbonate minerals are often encountered in the study of natural samples, and have been identified by a distinctive resonance at 290.3 eV. Here C K‐edge and Ca L‐edge spectra from a range of carbonate minerals are presented. Although all carbonates exhibit a sharp 290 eV resonance, both the precise position of this resonance and the positions of other resonances vary among minerals. The relative strengths of the different carbonate resonances also vary with crystal orientation to the linearly polarized X‐ray beam. Intriguingly, several carbonate minerals also exhibit a strong 288.6 eV resonance, consistent with the position of a carbonyl resonance rather than carbonate. Calcite and aragonite, although indistinguishable spectrally at the C K‐edge, exhibited significantly different spectra at the Ca L‐edge. The distinctive spectral fingerprints of carbonates provide an identification tool, allowing for the examination of such processes as carbon sequestration in minerals, Mn substitution in marine calcium carbonates (dolomitization) and serpentinization of basalts.     

TETRATHIAFULVALENE S-OXIDE: A FATAL “DONOR IMPURITY” IN THE ORGANIC METAL TTF-TCNQ

Abstract

Tetrathiafulvalene S-oxide (TTF-ox) was first detected by mass spectrometry in samples of Tetrathiafulvalene (TTF) which had been exposed to oxygen. Pure TTF-ox was prepared by peracid oxidation of TTF and isolated as a relativly stable solid. Physical data will be presented.     

Development of an automated dual‐mode supercritical fluid chromatography and reversed‐phase liquid chromatography mass‐directed purification system for small‐molecule drug discovery

We report the development of a dual‐mode mass‐directed supercritical fluid chromatography and reversed‐phase liquid chromatography purification system. The addition of a third pump allows for flexible mobile phase control between the two techniques, and enables operation of either chromatography mode within minutes by activation of a set of switching valves on a single system. Software control, fluidic pathways, interface to the mass spectrometer, and fraction collection have been modified for compatibility between both separation methods. The conditioning solvent and tuning parameters for the mass spectrometer were adjusted to achieve an ideal signal trace in either mode with good linearity (r² > 0.970) over a range of concentrations and minimal noise for accurate peak detection and isolation. The registration success rate is 90% and overall sample recovery for either technique is 80?90%. Combining two orthogonal separation and purification modes in one single system has improved the purification throughput of complex mixtures and has been a valuable, cost‐saving tool in our laboratory.     

Observation of B-->eta'K* and evidence for B+-->eta'rho+

We present an observation of B-->eta'K*. The data sample corresponds to 232x10(6) BB[over ] pairs collected with the BABAR detector at the PEP-II asymmetric-energy B factory at the Stanford Linear Accelerator Center. We measure the branching fractions (in units of 10(-6)) B(B(0)-->eta'K*0)=3.8+/-1.1+/-0.5 and B(B+-->eta'K*+)=4.9(1.7)(+1.9)+/-0.8, where the first error is statistical and the second systematic. A simultaneous fit results in the observation of B-->eta'K* with B(B-->eta'K*)=4.1(-0.9)(+1.0)+/-0.5. We also search for B-->eta'rho and eta'f(0)(980)(f(0)-->pi+pi-) with results and 90% confidence level upper limits B(B+-->eta'rho+)=8.7(-2.8-1.3)(+3.1+2.3) (<14), B(B(0)-->eta'rho0)<3.7, and B(B(0)-->eta'f(0)(980)(f(0)-->pi+pi-))<1.5. Charge asymmetries in the channels with significant yields are consistent with zero.     

Eigenvalue amplitudes of the Potts model on a torus

We consider the Q-state Potts model in the random-cluster formulation, defined on finite   two-dimensional lattices of size L×N$L\times N$ with toroidal boundary conditions. Due to the non-locality of the clusters, the partition function Z(L,N)$Z(L,N)$ cannot be written simply as a trace of the transfer matrix TL${\mathrm{T}}_L$. Using a combinatorial method, we establish the decomposition Z(L,N)=_∑l,Dkb(l,Dk)K_l,Dk$Z(L,N)={\sum }_{l,D_k}{b}^{(l,D_k)}{K}_{l,D_k}$, where the characters K_l,Dk=i_∑N(λi)$K_{l,D_k}={\sum }_i{({\lambda }_i)}^N$ are simple traces. In this decomposition, the amplitudes b(l,Dk)$b^{(l,D_k)}$ of the eigenvalues λi${\lambda }_i$ of TL${\mathrm{T}}_L$ are labelled by the number l=0,1,…,L$l=0,1,\dots ,L$ of clusters which are non-contractible with respect to the transfer (N  ) direction, and a representation Dk$D_k$ of the cyclic group Cl$C_l$. We obtain rigorously a general expression for b(l,Dk)$b^{(l,D_k)}$ in terms of the characters of Cl$C_l$, and, using number theoretic results, show that it coincides with an expression previously obtained in the continuum limit by Read and Saleur.     

Counting of Oxygen Defects versus Metal Surface Sites in Methanol Synthesis Catalysts by Different Probe Molecules

Different surface sites of solid catalysts are usually quantified by dedicated chemisorption techniques from the adsorption capacity of probe molecules, assuming they specifically react with unique sites. In case of methanol synthesis catalysts, the Cu surface area is one of the crucial parameters in catalyst design and was for over 25 years commonly determined using diluted N₂O. To disentangle the influence of the catalyst components, different model catalysts were prepared and characterized using N₂O, temperature programmed desorption of H₂, and kinetic experiments. The presence of ZnO dramatically influences the N₂O measurements. This effect can be explained by the presence of oxygen defect sites that are generated at the Cu‐ZnO interface and can be used to easily quantify the intensity of Cu‐Zn interaction. N₂O in fact probes the Cu surface plus the oxygen vacancies, whereas the exposed Cu surface area can be accurately determined by H₂.     

Simultaneous extraction of tetracycline, macrolide and sulfonamide antibiotics from agricultural soils using pressurised liquid extraction, followed by solid-phase extraction and liquid chromatography-tandem mass spectrometry

The veterinary antibacterial agents chlortetracycline (CTC), oxytetracycline (OTC), sulfadiazine (SDZ), erythromycin (ERY) and tylosin (TYL A, B, C and D) were extracted from soil using pressurized liquid extraction (PLE). Citric acid (pH 4.7) and methanol was used as extraction buffer, followed by tandem-solid-phase extraction (SPE) clean-up (SAX + HLB) for all compounds. For quantification two slightly different methods were employed using LC-MS-MS with MRM detection. The soil extraction method was validated using a loamy sand soil and a sandy soil, representing two typical Danish agricultural soils. Recoveries were 50-80% for the tetracyclines (CTC and OTC) and sulfadiazine (SDZ) and 60-100% for the macrolides (TYL and ERY). Limits of detection for the soil extraction method (LOD(soil)) were 0.6-5.6 microg kg(-1) soil for CTC and OTC, 0.9-2.9 microg kg(-1) soil for SDZ and 2.4-5.5 microg kg(-1) soil for TYL A and ERY. Furthermore, the method was applied to field samples taken from two agricultural fields fertilised with liquid manure containing CTC and TYL A. These results showed a decline in the content of antibacterial agents throughout the sampling period of 155 days from 10 to 15 microg CTC kg(-1) soil and 20-55 microg TYL A kg(-1) soil to below or near the LOD(soil) listed above. Finally, the method was applied to barley grains harvested from the fields. None of the antibacterial agents were measured in grain samples, but recoveries for spiked grain samples were similar to soil recoveries.