Effect of surface mobility on the particle sliding along a bubble or a solid sphere

The sliding velocity of glass beads on a spherical surface, made either of an air bubble or of a glass sphere held stationary, is measured to investigate the effect of surface mobility on the particle sliding velocity. The sliding process is recorded with a digital camera and analyzed frame by frame. The sliding glass bead was found to accelerate with increasing angular position on the collector's surface. It reaches a maximum velocity at an angular position of about 100 degrees and then, under certain conditions, the glass bead leaves the surface of the collector. The sliding velocity of the glass bead depends strongly on the surface mobility of a bubble, decreasing with decreasing surface mobility. By a mobile surface we mean one which cannot set up resistive forces to an applied stress on the surface. The sliding velocity on a rigid surface, such as a glass sphere, is much lower than that on a mobile bubble surface. The sliding velocity can be described through a modified Stokes equation. A numerical factor in the modified Stokes equation is determined by fitting the experimental data and is found to increase with decreasing surface mobility. Hydrophobic glass beads sliding on a hydrophobic glass sphere were found to stick at the point of impact without sliding if the initial angular position of the impact is less than some specific angle, which is defined as the critical sticking angle. The sticking of the glass beads can be attributed to the capillary contracting force created by the formation of a cavity due to spontaneous receding of the nonwetting liquid from the contact zone. The relationship between the critical sticking angle and the particle size is established based on the Yushchenko [J. Colloid Interface Sci. 96 (1983) 307] analysis.     

The dapE-encoded N-succinyl-l,l-diaminopimelic acid desuccinylase from Haemophilus influenzae is a dinuclear metallohydrolase

The Zn K-edge extended X-ray absorption fine structure (EXAFS) spectra, of the dapE-encoded N-succinyl-l,l-diaminopimelic acid desuccinylase (DapE) from Haemophilus influenzae have been recorded in the presence of one or two equivalents of Zn(II) (i.e. [Zn_(DapE)] and [ZnZn(DapE)]). The Fourier transforms of the Zn EXAFS are dominated by a peak at ca. 2.0 A, which can be fit for both [Zn_(DapE)] and [ZnZn(DapE)], assuming ca. 5 (N,O) scatterers at 1.96 and 1.98 A, respectively. A second-shell feature at ca. 3.34 A appears in the [ZnZn(DapE)] EXAFS spectrum but is significantly diminished in [Zn_(DapE)]. These data show that DapE contains a dinuclear Zn(II) active site. Since no X-ray crystallographic data are available for any DapE enzyme, these data provide the first glimpse at the active site of DapE enzymes. In addition, the EXAFS data for DapE incubated with two competitive inhibitors, 2-carboxyethylphosphonic acid and 5-mercaptopentanoic acid, are also presented.     

Experimental and theoretical charge density study of the neurotransmitter taurine

The experimental electron density distribution in taurine, 2-aminoethane sulfonic acid, 1, has been determined from high-resolution X-ray diffraction data collected at a temperature of 100 K. Taurine crystallizes as a zwitterion in the monoclinic space group P2(1)/c. Topological analysis of the experimental electron density and a comparison with high-level theoretical gas-phase calculations show that the crystal environment has a significant influence on the electronic configuration of the sulfonate moiety in 1, which in the crystal is more delocalized than in the gas phase. This crystal effect is mainly due to hydrogen bonding.     

Simultaneous isolation and label‐free identification of bacteria using contactless dielectrophoresis and Raman spectroscopy

The traditional bacterial identification method of growing colonies on agar plates can take several days to weeks to complete depending on the growth rate of the bacteria. Successfully decreasing this analysis time requires cell isolation followed by identification. One way to decrease analysis time is by combining dielectrophoresis (DEP), a common technique used for cell sorting and isolation, and Raman spectroscopy for cell identification. DEP‐Raman devices have been used for bacterial analysis, however, these devices have a number of drawbacks including sample heating, cell‐to‐electrode proximity that limits throughput and separation efficiency, electrode fouling, or inability to address sample debris. Presented here is a contactless DEP‐Raman device to simultaneously isolate and identify particles from a mixed sample while avoiding common drawbacks associated with other DEP designs. Using the device, a mixed sample of bacteria and 3 μm polystyrene spheres were isolated from each other and a Raman spectrum of the trapped bacteria was acquired, indicating the potential for cDEP‐Raman devices to decrease the analysis time of bacteria.     

The development of an integrated platform to identify breast cancer glycoproteome changes in human serum

Protein glycosylation represents one of the major post-translational modifications and can have significant effects on protein function. Moreover, changes in the carbohydrate structure are increasingly being recognized as an important modification associated with cancer etiology. In this report, we describe the development of a proteomics approach to identify breast cancer related changes in either concentration and/or the carbohydrate structures of glycoprotein(s) present in blood samples. Diseased and healthy serum samples were processed by an optimized sample preparation protocol using multiple lectin affinity chromatography (M-LAC) that partitions serum proteins based on glycan characteristics. Subsequently, three separate procedures, 1D SDS-PAGE, isoelectric focusing and an antibody microarray, were applied to identify potential candidate markers for future study. The combination of these three platforms is illustrated in this report with the analysis of control and cancer glycoproteomic fractions. Firstly, a molecular weight based separation of glycoproteins by 1D SDS-PAGE was performed, followed by protein, glycoprotein staining, lectin blotting and LC–MS analysis. To refine or confirm the list of interesting glycoproteins, isoelectric focusing (targeting sialic acid changes) and an antibody microarray (used to detect neutral glycan shifts) were selected as the orthogonal methods. As a result, several glycoproteins including alpha-1B-glycoprotein, complement C3, alpha-1-antitrypsin and transferrin were identified as potential candidates for further study.     

Use of high-temperature differential scanning calorimetry to investigate the β–α transition in calcium pyrophosphate

High-temperature differential scanning calorimetry was used to investigate the thermodynamic parameters of the γ–β and β–α transitions in calcium pyrophosphate (Ca₂P₂O₇). The measured enthalpy of transition compared well with previous results when higher heating rates (≥20 K min^?1) were used. Recommendations for optimal use of HTDSC in high-temperature phase transition measurements are presented.     

Light Modulates Electric Phenomena in Hornet Cuticle¶

In the cuticle of live social hornets, such as Vespa orientalis (Hymenoptera, Vespinae), endogenous electric effects are encountered, i.e. voltages of 100–200 mV under illumination and currents amounting to several microamperes on its subjection to darkness—clearly a process of charging and discharging. Of the various wavelengths of sunlight, UV was found to be the most contributory to the active cuticular voltage generation. Throughout the warm season of the yearthe–the active period in colonies of social hornets and wasps—colony members exit from the dark nest during the daytime and fly to the field under the hot sun for various foraging purposes, ultimately returning to the nest. Thus, each hornet, be it queen, worker or drone, probably undergoes daily cyclical process of electric charge and discharge in the exterior part of their integument, cuticle, which lasts up to 30–40 min. Such photoelectric phenomenon was detected in both live, ether‐anaesthetized hornets and dead hornets, albeit in the latter the electric values recorded were lower. The present study addresses the possible impact of the phenomenon on vespan daily life and also compares it with a parallel occurrence in electric fish.     

Alpha,omega-bis(thioacetyl)oligophenylenevinylene chromophores from thioanisol precursors

The selective cleavage of arylmethyl thioethers provides a convenient protocol for the synthesis of all-E isomers of alpha, omega-bis(thioacetyl)oligophenyenevinylene molecules (OPVs). The S-methyl group is tolerant of Wittig-type and Heck-type reactions for forming OPV structures and can be converted to the S-acetyl group by treatment with sodium thiomethoxide and acetyl chloride. The thermal conditions of the deprotection/reprotection step concurrently isomerize the conjugated chromophore to the all-E isomer, regardless of the stereochemistry of the starting olefins. This approach is demonstrated for a variety of linear and [2.2]paracyclophane containing OPVs, which have been characterized by electrochemical and spectroscopic techniques. Additionally, these S-acetyl-terminated OPVs self-assemble on gold surfaces. Monolayers containing these molecules were characterized by water contact angle measurements, ellipsometry, and X-ray photoelectron spectroscopy.     

Synthesis of Non-glucosamino Glucan Oligosaccharides Related to Heparin and Heparan Sulphate

Abstract

A series of three oligosaccharides, α-d-Glc-(1→4)-β-d-GlcA-1ωe, β-d-GlcA-(1→4)-α-d-Glc-(1→4)-β-d-GlcA-lωe and α-d-Glc-(1→4)-β-d-GlcA-(1→4)-α-d-Glc-(1→4)-β-d-GlcA-1ωe was prepared by a short synthetic route, using maltose and glucuronic acid derivatives as starting materials. The oligosaccharides contain glucose residues instead of glucosamines, and have a less complicated structure than the corresponding unsulphated structures found in native heparin and heparan sulphate. This simplification in structure has diminished the number of synthetic steps and raised the total yield compared to the preparation of the corresponding heparin/heparan sulphate structures which have been found to bind acidic and basic FGF.     

Hydrogen bonded arrays: the power of multiple hydrogen bonds

Hydrogen bond interactions in small covalent model compounds (i.e., deprotonated polyhydroxy alcohols) were measured by negative ion photoelectron spectroscopy. The experimentally determined vertical and adiabatic electron detachment energies for (HOCH(2)CH(2))(2)CHO(-)(2a), (HOCH(2)CH(2))(3)CO(-) (3a), and (HOCH(2)CH(2)CH(OH)CH(2))(3)CO(-) (4a)reveal that hydrogen-bonded networks can provide enormous stabilizations and that a single charge center not only can be stabilized by up to three hydrogen bonds but also can increase the interaction energy between noncharged OH groups by 5.8 kcal mol(-1) or more per hydrogen bond. This can lead to pK(a) values that are very different from those in water and can provide some of the impetus for catalytic processes.