Unit Load Size Determination Based on Economic Move Quantity

Material handling in job shop environments is accomplished through the transfer of parts between work centres. Parts that are grouped together prior to transfer form a unit load. A new method is proposed for determining the unit load size, called the economic move quantity (EMQ), based on cost considerations during the design phase of the production system. EMQ takes into account system performance through the use of a queueing network model.     

Positron systematics in annealed metals

Abtract Deconvoluted Doppler-broadened annihilation energy spectra in annealed metals are fitted by a parabola and a Gaussian function whose width and intensity vary systematically with the atomic number.     

Temperature dependence of positron trapping in deformed nickel

Non-equilibrium populations of defects, produced by plastic deformation of Ni, were used to study temperature dependence of the capture cross-section for positrons. A weak positive temperature coefficient was found in material of 99.8% purity but no temperature dependence in 99.99% purity.     

Vesicle and bilayer formation of diphytanoylphosphatidylcholine (DPhPC) and diphytanoylphosphatidylethanolamine (DPhPE) mixtures and their bilayers' electrical stability

Lipid bilayers are of interest in applications where a cell membrane mimicking environment is desired. The performance of the lipid bilayer is largely dependent on the physical and chemical properties of the component lipids. Lipid bilayers consisting of phytanoyl lipids have proven to be appropriate choices since they exhibit high mechanical and chemical stability. In addition, such bilayers have high electrical resistances. Two different phytanoyl lipids, 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) and 1,2-diphytanoyl-sn-glycero-3-phosphoethanolamine (DPhPE), and various combinations of the two have been investigated with respect to their behavior in aqueous solutions, their interactions with solid surfaces, and their electrical stability. Dynamic light scattering, nuclear magnetic resonance diffusion, and cryogenic transmission electron microscopy measurements showed that pure DPhPC as well as mixtures of DPhPC and DPhPE consisting of greater than 50% (mol%) DPhPC formed unilamellar vesicles. If the total lipid concentration was greater than 0.15g/l, then the vesicles formed solid-supported bilayers on plasma-treated gold and silica surfaces by the process of spontaneous vesicle adsorption and rupture, as determined by quartz crystal microbalance with dissipation monitoring and atomic force microscopy. The solid-supported bilayers exhibited a high degree of viscoelasticity, probably an effect of relatively high amounts of imbibed water or incomplete vesicle fusion. Lipid compositions consisting of greater than 50% DPhPE formed small flower-like vesicular structures along with discrete liquid crystalline structures, as evidenced by cryogenic transmission electron microscopy. Furthermore, electrophysiology measurements were performed on bilayers using the tip-dip methodology and the bilayers' capacity to retain its electrical resistance towards an applied potential across the bilayer was evaluated as a function of lipid composition. It was shown that the lipid ratio significantly affected the bilayer's electrical stability, with pure DPhPE having the highest stability followed by 3DPhPC:7DPhPE and 7DPhPC:3DPhPE in decreasing order. The bilayer consisting of 5DPhPC:5DPhPE had the lowest stability towards the applied electrical potential.     

A software package using a mesh-grid method for simulating HPGe detector efficiencies

Traditional ways of determining the absolute full-energy peak efficiencies of high-purity germanium (HPGe) detectors are often time consuming, cost prohibitive, or not feasible. A software package, KMESS (Kevin’s Mesh Efficiency Simulator Software), was developed to assist in predicting these efficiencies. It uses a semi-empirical mesh-grid method and works for arbitrary source shapes and counting geometries. The model assumes that any gamma-ray source shape can be treated as a large enough collection of point sources. The code is readily adaptable, has a web-based graphical front-end, and could easily be coupled to a 3D scanner. As will be shown, this software can estimate absolute full-energy peak efficiencies with good accuracy in reasonable computation times. It has applications to the field of gamma-ray spectroscopy because it is a quick and accurate way to assist in performing quantitative analyses using HPGe detectors.     

Nanoarchitectonic‐Based Material Platforms for Environmental and Bioprocessing Applications

The challenges of pollution, environmental science, and energy consumption have become global issues of broad societal importance. In order to address these challenges, novel functional systems and advanced materials are needed to achieve high efficiency, low emission, and environmentally friendly performance. A promising approach involves nanostructure‐level controls of functional material design through a novel concept, nanoarchitectonics. In this account article, we summarize nanoarchitectonic approaches to create nanoscale platform structures that are potentially useful for environmentally green and bioprocessing applications. The introduced platforms are roughly classified into (i) membrane platforms and (ii) nanostructured platforms. The examples are discussed together with the relevant chemical processes, environmental sensing, bio‐related interaction analyses, materials for environmental remediation, non‐precious metal catalysts, and facile separation for biomedical uses.     

An electrokinetic bioreactor: using direct electric current for enhanced lactic acid fermentation and product recovery

The microbiological production of organic acids by fermentation processes is growing in commercial importance. However, the removal of product and pH control are two main issues that limit the technical and commercial viability of such processes. A laboratory scale bioreactor combining conventional electrodialysis and bipolar membrane electrodialysis has been developed for in situ product removal and pH control in lactic acid fermentation. The electrokinetic process enabled removal of the biocatalytic product (lactic acid) directly from the bioreactor system, in a concentrated form, as well as enabling good pH control without generation of troublesome salts. Moreover, end-product inhibition of glucose catabolism was reduced, resulting in a greater generation of the end-product lactic acid. An automatic pH sensor and current application system was developed and successfully implemented for lactic acid fermentation in the electrokinetic bioreactor.     

{\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 Neutron activation analysis using Excel files and Canberra Genie-2000 \par }

Summary {\rtf1\ansi\ansicpg1250\deff0\deflang1038\deflangfe1038\deftab708{\fonttbl{\f0\froman\fprq2\fcharset238{\*\fname Times New Roman;}Times New Roman CE;}} \viewkind4\uc1\pard\f0\fs24 We have developed a method for analyzing neutron activated sample data by using Microsoft Excel as the analysis engine. A simple technique for inputting data is based on report files generated by Canberra’s Genie-2000 spectroscopy system but could be easily modified to support other vendors having report formats with consistent text placement. A batch program handles operating an automatic sample changer, acquiring the data, and analyzing the spectrum to create a report of the peak locations and net area. The entire report is then transferred to within an Excel spreadsheet as the source data for neutron activation analysis. Unique Excel templates have been designed, for example, to accommodate short-lived and long-lived isotopes. This process provides us with a largely integrated solution to NAA while providing the results in an industry standard spreadsheet format. This software is ideally suited for teaching and training purposes. \par }