Influence of Water Treatment and Wastewater Treatment on the Changes in Residues of Important Elements in Drinking Water

Drinking water is the essential medium for food production, and is also needed for direct consumption; while it must be free of harmful substances, it also must have a composition that is beneficial to health. The aim of this study was to evaluate the influence of water and wastewater treatment on reducing the concentrations of zinc (Zn), nickel (Ni), iron (Fe), manganese (Mn), copper (Cu), lead (Pb), and arsenic (As) in the Western Pomerania Voivodeship in Poland. The research was carried out in 2017–2019. The analysis was performed with inductively coupled plasma atomic emission spectrophotometry (ICP-AES). The concentrations of trace elements in drinking water were below maximum acceptable concentrations (MACs). Reductions in the most dangerous elements during water treatment fluctuated from 48.5% (As) to 97% (Pb). Wastewater treatment reduced the concentrations of analyzed elements by a range of 28.6 to 60.8%, and the most toxic elements (Pb and As) by over 50%. Trace element concentrations in treated wastewater were below MAC values, and ranged from 1.15% (Pb) to 6.23% (As) of MACs for toxic elements. The concentrations of both essential elements (Zn, Ni, Fe, Mn, Cu) and toxic elements (Pb, As) in drinking water were below the MACs. Water treatment had a significant (p < 0.05) effect on decreasing trace element concentrations.     

A highly efficient dioxo(mu-oxo)molybdenum(VI) dimer catalyst for olefin epoxidation

The oxo-bridged dimer [Mo(2)O(4)(mu(2)-O)Cl(2)(pzH)(4)] (1; pzH = pyrazole) exhibits unusually high activity in the liquid-phase catalytic epoxidation of the cyclic olefins cyclooctene and (R)-(+)-limonene under mild conditions and in the absence of additional organic solvents, using tert-butyl hydroperoxide as the oxidant. The complex is stable under the reaction conditions and can be used in further catalytic runs without significant loss of performance. An X-ray crystallographic investigation reveals that 1 has an unprecedented and extremely rare all-cis configuration at each of the MoO(2)-(mu(2)-O)Cl(pzH)(2) cores, which can be understood by considering supramolecular contacts and geometric factors.     

An ultrafast study of phenyl azide: the direct observation of phenylnitrenium ion

Ultrafast photolysis (lambda(ex) = 308 nm) of phenyl azide in 100% formic acid produces a broadly absorbing transient within the instrument time resolution (300 fs), which is assigned to an excited state of the azide. The azide excited state fragments within 300 fs to form singlet phenylnitrene. The decay of the nitrene (tau = 12.0 ps) produces a new species with absorption centered at 500 nm, which is assigned to phenylnitrenium ion. The lifetime of phenylnitrenium ion is 110 ps in 100% formic acid. This is the first spectroscopic observation of phenylnitrenium ion.     

Spectroscopic and theoretical investigation of molecular complexes of 2,4,6-trinitropyridine-1-oxide with some pyridine derivatives

Summary Stability constants and enthalpies of formation were determined forEDA complexes of 2,4,6-trinitropyridine-1-oxide (TNPO) with some pyridine bases. Energies of transition,hv _CT , calculated by the SCF MO CI-1 PPP method fit well the corresponding experimental data. Based on these results, geometries for the systems under study are proposed.

---

Spektroskopische und theoretische Untersuchung von molekularen Komplexen des 2,4,6-Trinitropyridin-1-oxids mit einigen Pyridinderivaten

Zusammenfassung Es wurden Stabilitätskonstanten und Bildungsenthalpiewerte einigerEDA-Komplexe von 2,4,6-Trinitropyridin-1-oxid mit ausgewählten Pyridinbasen bestimmt. Dabei wurde eine gute Übereinstimnmung zwischen den Anregungsenergienhv _CT aus den UV-VIS-Spektren und den mit der SCF-MO-CI-1 PPP-Methode errechneten Werten gefunden. Es werden für die untersuchten Komplexe entsprechende Strukturen vorgeschlagen.

     

Delamination of sodium montmorillonite in PA6 in the presence of melamine polyphosphate

This study describes the influence of melamine polyphosphate (MPP) flame retardant addition on layered structure of virgin sodium montmorillonite (MMT) in PA6/MMT system obtained in extrusion process. It was found that the extrusion of the PA6/MMT binary system in co‐rotating twin screw extruder gives intercalated clay nanocomposites, while during extrusion of ternary PA6/MMT/MPP composite, full exfoliation of clay was obtained in the system. Structure of the composites was proved utilizing wide angle X‐ray scattering and transmission electron microscopy techniques. Exfoliation of MMT in ternary PA6/MMT/MPP system was also confirmed by rheological studies (viscosity and creep measurements) which were carried out using rotational rheometer. Young's modulus of PA6/MMT/MPP was found to be ~25% greater comparing to PA6/MPP of the same filling level. Cone calorimetry experiments proved decrease of heat release rate peak of PA6/MMT/MPP by ~55% comparing to PA6/MPP with the same total filling level. Copyright © 2017 John Wiley & Sons, Ltd.     

纳米晶枝CuAu合金催化剂对二氧化碳电催化还原性能的研究

利用可再生清洁能源将CO2转化为CO和其他小分子是合成含碳燃料的可观方法之一.间歇性可再生能源存储的重要策略之一是将二氧化碳进行电化学还原.选择具有高活性和稳定性的电催化剂对于电化学还原CO2至关重要.在这项研究中,我们使用简单的电沉积方法合成了具有纳米晶枝状结构的CuAu合金电极.各项表征显示原子比约为1∶1的CuA...     

Probiotic Yoghurts with Sea Buckthorn,Elderberry, and Sloe Fruit Purees

Elderberries, sea buckthorn, and sloe berries are fruits of wild-grown bushes, valued in folk medicine for their health-promoting properties but still rarely applied in food. The aim of the present study was to produce probiotic yoghurts with a 10% addition of sweetened purees prepared from elderberries (EPY), sea buckthorn (SBPY), and sloe berries (SPY) and to assess their chemical composition, acidity, content of polyphenols and anthocyanins, ferric reducing antioxidant power (FRAP) and antiradical power (ARP), level of starter microbiota, concentration of acetaldehyde and diacetyl, syneresis, instrumentally measured color and texture parameters, and sensory acceptance. The results were compared to those obtained for plain probiotic yoghurt (PPY) and the changes tracked during 1 month of cold storage at 2 week intervals. The addition of elderberry and sloe berries significantly increased the antioxidant capacity of probiotic yoghurts, probably due to a high content of polyphenols, especially anthocyanins. However, anthocyanins were more stable in the EPY when compared to the SPY. All yoghurt treatments were characterized by good sensory quality and viability of starter microorganisms, including probiotic strains during cold storage. Elderberries promoted the evolution of diacetyl in yoghurts during storage and, together with sloe berries, produced increased syneresis and the greatest changes in color profile compared to PPY.     

RNA Ligation for Mono and Dually Labeled RNAs

Labeled RNAs are invaluable probes for investigation of RNA function and localization. However, mRNA labeling remains challenging. Here, we developed an improved method for 3′-end labeling of in vitro transcribed RNAs. We synthesized novel adenosine 3′,5′-bisphosphate analogues modified at the N6 or C2 position of adenosine with an azide-containing linker, fluorescent label, or biotin and assessed these constructs as substrates for RNA labeling directly by T4 ligase or via postenzymatic strain-promoted alkyne-azide cycloaddition (SPAAC). All analogues were substrates for T4 RNA ligase. Analogues containing bulky fluorescent labels or biotin showed better overall labeling yields than postenzymatic SPAAC. We successfully labeled uncapped RNAs, NAD-capped RNAs, and 5′-fluorescently labeled m⁷Gp₃A_m-capped mRNAs. The obtained highly homogenous dually labeled mRNA was translationally active and enabled fluorescence-based monitoring of decapping. This method will facilitate the use of various functionalized mRNA-based probes.     

How to Obtain the Maximum Properties Flexibility of 3D Printed Ketoprofen Tablets Using Only One Drug-Loaded Filament?

The flexibility of dose and dosage forms makes 3D printing a very interesting tool for personalized medicine, with fused deposition modeling being the most promising and intensively developed method. In our research, we analyzed how various types of disintegrants and drug loading in poly(vinyl alcohol)-based filaments affect their mechanical properties and printability. We also assessed the effect of drug dosage and tablet spatial structure on the dissolution profiles. Given that the development of a method that allows the production of dosage forms with different properties from a single drug-loaded filament is desirable, we developed a method of printing ketoprofen tablets with different dose and dissolution profiles from a single feedstock filament. We optimized the filament preparation by hot-melt extrusion and characterized them. Then, we printed single, bi-, and tri-layer tablets varying with dose, infill density, internal structure, and composition. We analyzed the reproducibility of a spatial structure, phase, and degree of molecular order of ketoprofen in the tablets, and the dissolution profiles. We have printed tablets with immediate- and sustained-release characteristics using one drug-loaded filament, which demonstrates that a single filament can serve as a versatile source for the manufacturing of tablets exhibiting various release characteristics.