Thermal behavior of the highly luminescent poly(3-hydroxybutyrate):Eu(tta)3(H2O)2 red-emissive complex

The aim of this study has been to gain a fundamental understanding of the mechanisms governing thermal degradation of luminescent poly(3-hydroxybutyrate) (PHB). PHB was doped with diaquatris(thenoyltrifluoroacetonate) europium(III) complex, [Eu(tta)₃(H₂O)₂], and different luminescent systems were obtained. The thermal-stability of the luminescent films was discussed and the products of decomposition were analyzed. Thermal degradation of PHB:Eu(tta)₃ x % systems (x = 0, 1, 5, 10, and 15 %) was elucidated by means of thermogravimetric analysis (TG), the thermal-stability decreases with the increase of europium complex concentration. The PHB polymer decomposed with evolution of carbon dioxide and 2-butenoic acid molecules. The TG–FTIR results, of the gaseous degradation products of PHB in nitrogen atmosphere, indicated that the polymer is stable at temperatures up to 200 °C. Polymer matrix at concentrations above 5 % decomposed with evolution of water molecules among the other gaseous products, which implied the presence of a hydrated complex in the system. The luminescent films showed more flexibility due to a loss in crystallinity, which suggested a potential usefulness in technical applications.     

Application of PM-IRRAS to study thin films on industrial and environmental samples

Polarization modulation–infrared reflection absorption spectroscopy (PM-IRRAS) was employed to analyze two unique samples: (1) an industrially prepared alkoxysilane-pretreated aluminum alloy (AA6111) in the absence and presence of a ～600-nm-thick lubricant coating and (2) a chemical warfare agent simulant, triethyl phosphate (TEP), on glass. For the pretreated aluminum samples, PM-IRRAS spectra were analyzed for three distinct regions; the SiO stretching vibration around 1120 cm^?1, the NH₂ bending mode at ～1600 cm^?1 and the CH stretching region around 2900 cm^?1. Our results showed that increasing the curing temperature (from 55 to 100 °C) improved the overall extent of cross-linking within the siloxane network. In addition, the spectra of lubricant (top coating) and the underlying siloxane layer for the aluminum samples with lubricant were collected for the same sample. Our results show that the nature of the siloxane film remains intact and unaltered after deposition of the lubricant top-coat. For detection of TEP on glass, the band at 1268 cm^?1, corresponding to the P═O vibration, was monitored. A droplet of TEP solution in dichloromethane was deposited on glass. After solvent evaporation had occurred, the intensity of the P═O vibration band was used to construct calibration curves to determine the experimental limit of detection, which was found to be ～200 μg for TEP on glass.

The 2‐Cyano‐2,2‐dimethylethanimine‐N‐oxymethyl Group for the 2′‐Hydroxyl Protection of Ribonucleosides in the Solid‐Phase Synthesis of RNA Sequences

The reaction of 2‐cyano‐2‐methyl propanal with 2′‐O‐aminooxymethylribonucleosides leads to stable and yet reversible 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl)ribonucleosides. Following N‐protection of the nucleobases, 5′‐dimethoxytritylation and 3′‐phosphitylation, the resulting 2′‐protected ribonucleoside phosphoramidite monomers are employed in the solid‐phase synthesis of three chimeric RNA sequences, each differing in their ratios of purine/pyrimidine. When the activation of phosphoramidite monomers is performed in the presence of 5‐benzylthio‐1H‐tetrazole, coupling efficiencies averaging 99 % are obtained within 180 s. Upon completion of the RNA‐chain assemblies, removal of the nucleobase and phosphate protecting groups and release of the sequences from the solid support are carried out under standard basic conditions, whereas the cleavage of 2′‐O‐(2‐cyano‐2,2‐dimethylethanimine‐N‐oxymethyl) protective groups is effected (without releasing RNA alkylating side‐products) by treatment with tetra‐n‐butylammonium fluoride (0.5 m) in dry DMSO over a period of 24–48 h at 55 °C. Characterization of the fully deprotected RNA sequences by polyacrylamide gel electrophoresis (PAGE), enzymatic hydrolysis, and matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry confirmed the identity and quality of these sequences. Thus, the use of 2′‐O‐aminooxymethylribonucleosides in the design of new 2′‐hydroxyl protecting groups is a powerful approach to the development of a straightforward, efficient, and cost‐effective method for the chemical synthesis of high‐quality RNA sequences in the framework of RNA interference applications.     

Stereospecific Synthesis of (2E,13Z)‐2,13‐Octadecadienyl Acetate,the Sex Pheromone Component of the Lepidoptera Species

The main component of the sex pheromone of many lepidopteran pests, (2E,13Z)‐2,13‐octadecadienyl acetate (1), has been synthesized following a simple route using 12‐(2‐tetrahydropyranyloxy)‐1‐dodecyne (2) as the starting material.     

Quantitative measurement of different ceramide species from crude cellular extracts by normal-phase high-performance liquid chromatography coupled to atmospheric pressure ionization mass spectrometry

Normal-phase high-performance liquid chromatography (NP-HPLC) coupled to atmospheric pressure ionization mass spectrometry (APCI-MS) allows quantitative analysis of endogenous ceramide and dihydroceramide species from crude lipid extracts. Qualitative information for the species comes from observation of differences in chromatographic and mass spectrometric behavior between species (Pettus et al. Rapid Commun. Mass Spectrom. 2003; 17: 1017-1026). Quantitative analysis is achieved by (1) use of a synthetic internal standard as an extraction and injection control, (2) lack of salt adduction, ion suppression, or other matrix effects in APCI mode, and (3) consistent fragmentation and ionization of external standards across the physiologically relevant concentration range found in endogenous lipid samples. Application to the analysis and quantitation of ceramide and dihydroceramide from various cell lines is demonstrated. The results from APCI-MS analysis corroborate and enhance information acquired from use of the diacylglycerol kinase assay for total ceramide measurement. This technique readily allows simultaneous quantitation of ceramide and dihydroceramide species.     

Towards Clathrates: Frozen States of Hydration of tert‐Butylamine

The dilution of tert‐butylamine (tBA) with water and subsequent cooling leads to a large series of different crystalline hydrates by an in situ IR laser melting‐zone procedure. The crystal structures were determined for tBA?n H₂O, with n=0, , 1, 7 , 7 , 9 , 11, and 17. For the two lower hydrates (n= , 1), one‐ and two‐dimensional hydrogen‐bonded networks are formed, respectively. The higher hydrates (n>1) exhibit a clathrate‐like three‐dimensional water framework with the tBA molecules as part of, or sitting inside, the cages. In all cases, tBA is hydrogen‐bonded to the H₂O framework. In the intermediate range (1相似文献   

New approach to the determination phosphorothioate oligonucleotides by ultra high performance liquid chromatography coupled with inductively coupled plasma mass spectrometry

This text presents a novel method for the separation and detection of phosphorothioate oligonucleotides with the use of ion pair ultra high performance liquid chromatography coupled with inductively coupled plasma mass spectrometry The research showed that hexafluoroisopropanol/triethylamine based mobile phases may be successfully used when liquid chromatography is coupled with such elemental detection. However, the concentration of both HFIP and TEA influences the final result. The lower concentration of HFIP, the lower the background in ICP-MS and the greater the sensitivity. The method applied for the analysis of serum samples was based on high resolution inductively coupled plasma mass spectrometry. Utilization of this method allows determination of fifty times lower quantity of phosphorothioate oligonucleotides than in the case of quadrupole mass analyzer. Monitoring of ³¹P may be used to quantify these compounds at the level of 80 μg L⁻¹, while simultaneous determination of sulfur is very useful for qualitative analysis. Moreover, the results presented in this paper demonstrate the practical applicability of coupling LC with ICP-MS in determining phosphorothioate oligonucleotides and their metabolites in serum within 7 min with a very good sensitivity. The method was linear in the concentration range between 0.2 and 3 mg L⁻¹. The limit of detection was in the range of 0.07 and 0.13 mg L⁻¹. Accuracy varied with concentration, but was in the range of 3%.     

Assessment of 4-nitrogenated benzyloxymethyl groups for 2'-hydroxyl protection in solid-phase RNA synthesis

The search for a 2'-OH protecting group that would impart ribonucleoside phosphoramidites with coupling kinetics and coupling efficiencies comparable to those of deoxyribonucleoside phosphoramidites led to an assessment of 2'-O-(4-nitrogenated benzyloxy)methyl groups through solid-phase RNA synthesis using phosphoramidites 2a-d, 12a, and 14a. These phosphoramidites exhibited rapid and efficient coupling properties. Particularly noteworthy is the cleavage of the 2'-O-[4-(N-methylamino)benzyloxy]methyl groups in 0.1 M AcOH, which led to U19dT within 15 min at 90 degrees C. [reaction: see text]     

Metal complexes of porphycene,corrphycene, and hemiporphycene: stability and coordination chemistry

Porphyrin (P), porphycene (Pc), corrphycene (Cn), and hemiporphycene (Hpc) represent a series of well defined "4-N in" constitutional porphyrin isomers. These isomers, in the form of their octaethyl derivatives, represent a congruent set of porphyrinoids whose properties can be compared. In this study we report how variations in electronic structure and nitrogen-core size in the free-base forms of these four systems are reflected in the properties of their corresponding metal complexes. Specifically, the effects that these differences have on the axial ligation properties of the Zn(II), Mg(II), Ni(II), and Co(II) complexes of P, Pc, Cn, and Hpc in toluene using pyridine as the axial ligand are detailed. Also reported are the relative stabilities of these complexes under acidic conditions. It is shown that for the zinc, magnesium, and cobalt complexes, there are distinct differences in the ability to maintain four-, five-, or six-coordinate geometries in the presence of similar concentrations of pyridine. By contrast, no apparent differences in axial ligand binding affinity are seen for the four nickel complexes. Little difference in stability was likewise seen when these same complexes were subject to acid-mediated demetallation, with all four falling into stability class II, according to the accepted porphyrin stability ranking system. High stabilities were also seen in the case of the cobalt complexes, with the Pc and Cn complexes being of stability class III and the P and Hpc derivatives falling into stability class II. The Zn(II) and Mg(II) complexes were all far less stable than the corresponding Ni(II) and Co(II) complexes. In this case, semiquantitative analyses of the rate of acid-induced decomposition revealed the following stability sequence P>Cn>Hpc>Pc for both the Zn(II) and Mg(II) complexes. Single-crystal X-ray diffraction structures were solved for the Zn(II), Mg(II), and Ni(II) complexes of the octaethyl derivatives of Hpc, Cn, and Pc as well as a Co(II) octamethylcorrphycene and are reported as part of this study. These solid-state structures confirm four-coordinate species for the Ni(II) complexes, four- and five-coordinate species for the Mg(II) and Zn(II) complexes, and a six-coordinate species for the lone Co(II) complex.     

Stability of Ibuprofen in its Inclusion Complex with β-Cyclodextrin

The ibuprofen--cyclodextrin inclusion complex was prepared by theco-precipitation method. The identity of the obtained product was verified by X-ray and thermogravimetric techniques. The effect of -cyclodextrin on the stability of ibuprofen was analysed.