Stille Catalyst‐Transfer Polycondensation Using Pd‐PEPPSI‐IPr for High‐Molecular‐Weight Regioregular Poly(3‐hexylthiophene)

A commercially available palladium N‐heterocyclic carbene (Pd‐NHC) precatalyst is used to initiate chain‐growth polymerization of 2‐bromo‐3‐hexyl‐5‐trimethylstannylthiophene. The molecular weight of the resultant poly(3‐hexylthiophene) can be modulated (7 to 73 kDa, Đ = 1.14 to 1.53) by varying the catalyst concentration. Mass spectrometry data confirm control over the polymer end groups and ¹H NMR spectroscopy reveals that the palladium catalyst is capable of “ring‐walking”. A linear relationship between M_n and monomer conversion is observed. Atomic force microscopy and X‐ray scattering verify the regioregular nature of the resultant polythiophene.

     

Applicability of generic linear scoring mosels in the U.S. credit-union environment

Although credit-scoring models represent a widely used managerialaid for large financial intermediaries, the vast majority ofU.S. credit unions—relatively small cooperatively ownedretail intermediaries, constrained by sample and funding limitations—haveyet to adopt such techniques. Lovie & Lovie (1986) havetheorized that the flat-maximum effect or curve of insensitivityassociated with linear scoring models could be advantageousin areas of applied prediction such as credit scoring. In thiscontext, we reported the relative predictive power of genericcredit-scoring models versus customized models in an earlierpaper (Overstreet et al. 1992). Unfortunately, these findingswere not readily adaptable to the credit-union industry dueto a dated sample with incomplete credit-bureau information.Consequently, from 1988 to 1991, we gathered a refined databasefrom which to further develop and field-test generic scoringmodels in the credit-union environment. The results reportedherein not only confirm, but amplify, the relative predictivepower of such models found earlier. Relative costs and benefitsof generic versus customized models are modelled for a representativecredit union. Future research directions are set forth in theconclusions.     

Detecting deviations from pure EOF during CE separations

CE separations are known for their high separation efficiencies. In systems with EOF, the high efficiencies benefit from the flat, plug profile that is characteristic of EOF. When a velocity gradient is present, such as in separations which have nonuniform buffer ionic strength, surface adsorption or differences in the height of the ends of the capillary, a parabolic flow component is introduced. This deviation from purely EOF yields increased peak dispersion and a subsequent decrease in separation performance. This work details a rapid method for detecting deviations from ideal plug flow during the course of a separation using the radially averaged flow profile of a photobleached fluorophore added to the BGE. By comparing the ratio of two different data analysis procedures, deviations from ideal plug flow can be detected. This method allows rapid measurement of flow character and does not interfere with the concurrent separation. We demonstrate easy detection of the onset of hydrodynamic flow induced by both gravity siphoning and an ionic strength buffer discontinuity. A brief analysis of the radially averaged peak shapes is also presented.     

Proton-induced grain boundary segregation in stainless steel

Abstract

A technique is developed which addresses the problem of irradiation assisted stress corrosion cracking of stainless steels in light water reactors using high energy protons to induce grain boundary segregation. These results represent the first grain boundary segregation measurements in bulk produced by proton irradiation of stainless steel. The technique allows the study of grain boundary composition with negligible sample activation, short irradiation time, rapid sample turnaround and at minimal cost. Scanning Auger electron microscopy is used to obtain grain boundary composition measurements of irradiated and unirradiated samples of ultra high purity (UHP) type 304L stainless steel and UHP type 304L steels with the additions of phosphorus (UHP + P) and sulphur (UHP + S). Results show that irradiation of all three alloys causes significant Ni segregation to the grain boundary and Cr and Fe away from it. Irradiation of the UHP + P alloy also results in segregation of P at the grain boundary from 5.3 to 8.7 at %, over 80 times the bulk value. No radiation-induced grain boundary segregation of S was measured in the UHP + S alloy. Results also indicate that the presence of P or S may enhance radiation-induced segregation of major alloying elements at the boundary. Comparison of irradiated and unirradiated regions of the UHP + P alloy indicate that while a prior thermal treatment segregates P to the grain boundary to 5.3 at %, the major element concentrations at the grain boundary are completely different from those under irradiation.     

Evaluation and single laboratory validation of an on-line turbulent flow extraction tandem mass spectrometry method for melamine in infant formula

This report presents the single-laboratory validation of a method for the determination of melamine in dairy-based products using on-line turbulent flow extraction-tandem mass spectrometry. Liquid or powder test portions were dissolved in water, enriched with (13)C(3)(15)N(3)-Melamine internal standard, followed by protein precipitation and withdrawal of an aliquot for analysis. The turbulent flow method was validated by analyses of liquid and powdered proficiency test portions containing up to 10mg/kg melamine. Accuracy of results ranged from 96 to 106% of the assigned values for the 6 proficiency test portions tested with relative standard deviations of 4-8%. Apparent recoveries based on addition of amino-(15)N(3)-Melamine to prepared test portions were between 98 and 114%. Based on the repeat analysis of a known blank sample the limit of detection and limit of quantification were determined to be 27 and 87 μg/kg, respectively. Additionally, this report demonstrates that turbulent flow chromatography is significantly faster than traditional LC-MS, with sample analysis times of less than 2 min.     

Studies on the coupling of substituted 2-amino-1,3-oxazoles with chloro-heterocycles

Direct coupling of five-membered heterocyclic amines with halo-heterocycles is a notoriously recalcitrant transformation. Herein we report our findings on the coupling of substituted 2-amino-1,3-oxazoles with chloro-heterocycles. Whereas the coupling of 2-amino-1,3-oxazole is inefficient under a large variety of state-of-the-art catalytic conditions tested, coupling of an ester substituted 2-amino-1,3-oxazole is relatively efficient and provides access, via a hydrolysis–decarboxylation protocol, to the 2-amino-1,3-oxazole coupled products.     

Quantum Monte Carlo study of the CO interaction with a dimer model surface for Cr(110)

The chemisorption of CO on a Cr (110) surface is investigated using the quantum Monte Carlo method in the diffusion Monte Carlo (DMC) variant and a model Cr₂CO cluster. The present results are consistent with the earlier ab initio HF study with this model that showed the tilted/near-parallel orientation as energetically favoured over the perpendicular arrangement. The DMC energy difference between the two orientations is larger (1.9 eV) than that computed in the previous study. The distribution and reorganization of electrons during CO adsorption on the model surface are analysed using the topological electron localization function method that yields electron populations, charge transfer and clear insight on the chemical bonding that occurs with CO adsorption and dissociation on the model surface.     

Characterization of aromatic-thiol π-type hydrogen bonding and phenylalanine-cysteine side chain interactions through ab initio calculations and protein database analyses

In this study, the aromatic-thiol π hydrogen bonding and phenylalanine-cysteine side chain interactions are characterized through both molecular orbital calculations on a C₆H₆-HSCH₃ model complex and database analyses of 609 X-ray protein structures. The aromatic-thiol π hydrogen bonding interaction can achieve a stabilization energy of 2.60 kcal mol^?1, and is stronger than the already documented aromatic-hydroxyl and aromatic-amino hydrogen bonds. However, the occurrence of the aromatic-thiol hydrogen bond is rather rare in proteins. This is because most of the thiol groups participate in the formation of either disulphide bonds or stronger S—H…O (or N) ‘normal’ hydrogen bonds in a protein environment. Interactions between the side chains of phenylalanine and cysteine residues are characterized as the phenyl(Phe)(HSCH₂-)(Cys) interaction. The bonding energy for such interactions is approximately 3.71 kcal mol-¹ and is achieved in a geometric arrangement with an optimal phenyl(Phe)-(HS-)(Cys) π-type hydrogen bonding interaction. The interaction is very sensitive to the orientation of the two lone electron pairs on the sulphur atom relative to the π electron cloud of the phenyl ring. Accordingly, the interaction configurations that can accomplish a significant bonding energy exist only within a narrow configurational space. The database analysis of 609 experimental X-ray protein structures demonstrates that only 268 of the 1620 cysteine residues involve such phenylalanine-cysteine side chain interactions. Most of these interactions occur in the form of π (aromatic)-lone pair(sulphur) attractions, and correspond to a bonding energy less than 1.5 kcal mol^?1. A few were identified as the aromatic-thiol hydrogen bond with a bonding energy of 2.0–3.6 kcal mol^?1.