Dielectric relaxation of polystyrene with side-chain- and chain-end-labels

Polystyrenes with different concentrations of side groups with cyano groups were prepared and complex dielectric constants were measured in the range of the glass transition temperature and the frequency range of 10^–2–10⁷ Hz.The GPC and DSC measurements showed that the molecular weight of these polystyrenes was about 10500 g/mole and the glass transition temperatures were 89.5°C for all samples.The dielectric relaxation spectra obtained for the side group polystyrene labels and also the chain-end polystyrene labels prepared before [9] were analyzed to find out the degree of coupling of the chain-end and side-group labels with the cooperative reorientation of the polymeric matrix. The analysis of the spectra was carried out using the analysis method developed by Mansour and Stoll [6].The results obtained showed that both end- and side-group labels are strongly coupled with the segmental reorientation and relax with relaxation times longer than that of the segments.The value of logf _m = (logf _m(label)) – logf _m(matrix)) was obtained from the recently designed comparison diagram suggested by Mansour and Stoll [6, 14]. The value of logf _m depends on the label length in the case of chain-end labels.It was surprising to find that the side groups relax slower than the segments by only 0.9 decades. These results obtained implied that the label relaxes through a multistep relaxation mechanism of the side and end groups and not through a diffusion mechanism of the whole chain. In addition, the effective lengths of the relaxing units were determined using the empirical equation obtained before in the case of rodlike molecules in polyisoprene [7].     

Thermodynamics of CaCO3 phase transitions

Thermodynamic quantities of the aragonite → calcite transition, were evaluated using results of calorimetric investigations. (1) Dissolution enthalpies of the CaCO₃ polymorphs aragonite and calcite measured near room temperature with different calorimeter, (2) the enthalpy of the spontaneous phase transformation obtained by differential scanning calorimetry, (3) heat capacities and heat capacity differences determined with a heat flux calorimeter as well as previously determined, (4)e.m.f. data on Gibbs-energies of the phase transition were processed simultaneously with an optimization routine developed recently. The optimized data set (25°C) given below corresponds reasonably with CODATA recommendations, however, the precision has markedly improved.     

Atmospheric Pressure Plasma Pretreatment of Sugarcane Bagasse: the Influence of Biomass Particle Size in the Ozonation Process

Atmospheric pressure O₂ plasma was used to produce ozone in order to treat sugarcane bagasse as a function of particle sizes. The fixed bagasse moisture content was 50 %. The delignification efficiency had small improvement due to ozonation process as a function of particle size, varying from 75 up to 80 %. Few amounts of hemicellulose were removed, but the ozonation has not been affected significantly with particle size variance as well (from 30 up to 35 %). The cellulose presented some losses below 1.0 mm size (8–15 %) which was an unexpected result. The conversion of cellulose content into free sugar has shown a significant increase as the particle size has diminished as well. The best condition of the bagasse particle size was for 0.08 mm. For this case, a great quantity of cellulose (78.8 %) was converted into glucose. Optical absorption spectroscopy was applied to determine ozone concentrations in real time where the samples with typical bagasse particle sizes equal or below to 0.5 mm had shown a better absorption of ozone in comparison with greater particle size samples.     

Stress-enhanced transport of toluene in poly aryl ether ether ketone (PEEK)

The transport of fluids in the semicrystalline polymer, poly(aryl ether ether ketone) (PEEK), was investigated. Both solubility and rate of penetration of toluene into PEEK are markedly increased by the application of an external stress. The induction period (i.e., the time for the sorption to begin) is a function of applied stress as well as temperature and crystallinity. At 22°C in 29% crystalline PEEK the induction period was reduced from more than 2000 h to approximately 10 h whereas the solubility of toluene was increased from 9 to 44 wt % upon the application of an external tensile stress of 30 MPa. A critical stress (i.e., a stress value below which the stress-enhanced effects are not observed) was determined. The critical stress is a strong function of crystallinity and temperature. © 1996 John Wiley & Sons, Inc.     

Molecular surfaces: An advantageous starting point for the description of composition‐dependent viscosities applied to polymer solutions

The viscosity of polymer/solvent systems is modeled as a function of composition under the premises that the dissipation of energy is taking place at the molecular interfaces and that the friction between solvent and solute varies with composition due to a change in the flow mechanism (drainage of coils). The simple expression obtained in this manner contains three system‐specific parameters: a geometric factor γ, which accounts for the differences of the surface to volume ratios of the components; a hydrodynamic parameter α, which measures the friction between solute and solvent in the case of fully draining polymer coils; and β, which corrects for changes in the friction between unlike molecules resulting from collective motions owing to limited draining. Experimental data published for 12 poly(dimethylsiloxane)/pentamer mixtures can be represented quantitatively by this relation; moreover the knowledge of the three system‐specific parameters permits the calculation of intrinsic viscosities, and the molecular weight dependencies of γ and α yield the entangle molecular weight of the polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2221–2228, 1999     

Global activities in the world of reference materials including the needs of developing countries

Proceedings of previous BERM meetings have been used to assess emerging trends in the development of RMs to meet AQC requirements of clinical, food, nutrition, and environmental health areas. BRM-1 reflected a strong need to initiate and expand RM activities for certifying organic nutrients in foods. BRM-2 highlighted the distinction between primary (certified) and secondary (e.g. check samples for proficiency testing) RMs¹. BRM-3 identified the need for producing different levels of an analyte in a given matrix (spiked standards) to address matrix related measurement problems in foods. BERM-4 highlighted the need for a global vision in dealing with standards, illustrated by the activities of GESREM. Also, the logistics required for setting up intercomparison programs related to food safety monitoring programs were outlined. BERM-5 presented the changing outlook of the AOAC International in recognizing the usefulness of incorporating RMs for use in conjunction with their methods validation protocol. BERM-6 brought to the forefront the concern for traceability of chemical measurements to internationally recognized standards. BERM-7 recognized the need for multidisciplinary approaches for preparing certain types of CRMs, partly in response to the measurement needs arising from governmental regulations dealing with food safety and environmental health criteria. Finally, BERM symposia have promoted a meaningful dialogue on the RM needs of African, Asian and South American countries and provided the developing countries opportunities to discuss their problems with the international analytical community. The issue of health safety is involved in movement of foodstuffs between countries, and therefore, international efforts as voiced by the World Health Organization to provide guidance and assistance in AQC matters to the needy countries deserve consideration.     

Single series peptide fragment ion spectra generated by two-stage collision-induced dissociation in a triple quadrupole

By using nanoelectrospray ionization and a triple quadrupole analyzer, simplified fragment ion spectra of peptides have been recorded by combining skimmer collision-induced dissociation with precursor ion scanning or neutral loss scanning. These pseudo-MS³ scan modes are characterized by two-stage collision-induced dissociation and have been termed sCID/precursor and sCID/neutral loss scan, respectively. By these scan modes, peptide fragment ion spectra can be generated that predominantly show signals of a single fragment ion series, such as the B or Y″ series. Skimmer collision-induced dissociation combined with scanning for neutral loss of 28 generates spectra showing B ions, whereas combination with precursor ion scanning for the Y″₁ ion results in spectra showing Y″ ions for tryptic peptides (Y″₁=m/z 147 for C-terminal lysine, Y″₁=m/z 175 for C-terminal arginine). Sequence information including the direction of the sequence is easily extracted from the simplified fragment ion spectra generated by two-stage collision-induced dissociation, because the scan mode defines the type of fragments observed. The analytical results reported are similar to those that have been achieved in MS³ experiments using a hybrid BEQQ or a pentaquadrupole mass spectrometer (Schey, K. L.; Schwartz, J. C.; Cooks, R. G. Rapid Commun. Mass Spectrom. 1989, 3, 305–309). The pseudo-MS³ technique used in this study has some limitations with respect to sample purity, because there is no step of mass selection before the first stage of collisional activation; however, it has the advantage that a standard triple quadrupole instrumentation can be used.     

Thermochemical Investigations of Calcium Carbonate Phase Transitions I. Thermal activated vaterite—calcite transition

The vaterite—calcite transition above 630 K has been studied by isothermal and non-isothermal differential scanning calorimetry. Vaterite samples prepared under different conditions were investigated. The transition temperature is strongly dependent on the sample preparation. The observed transition enthalpy H_tr is nearly equal for different samples and experimental conditions. From 28 measurements a value of H_tr–(3.12±0.11) kJ mol^–1 was obtained. The activation energy for the polymorphic transition was calculated from the Arrhenius plot and by use of isoconversional methods, as a function of the degree of conversion. The influence of the kinetic model distortion and experimental uncertainties on the obtained data was discussed. The actual value of the activation energy was assessed at E_a=(250±10) kJ mol^–1 for nearly all examined samples. Functions, corresponded to the model mechanism of nuclei formation and growth, provide the unambiguous consideration of the transition kinetic for the investigated vaterite samples. Differences in the dynamic behaviour of several samples at the transition are established.This revised version was published online in November 2005 with corrections to the Cover Date.     

Application of instrumental radioanalytical techniques to nuclear waste testing and characterization

This paper describes the validation of a multi-technique analytical methodology that uses inductively coupled plasma-mass spectrometry, α-spectrometry, and γ-spectrometry for the routine analysis of samples containing transuranic radionuclides. This methodology is capable of the determination of concentrations of both²³⁸Pu and²⁴¹Pu in the presence of²³⁸U and²⁴¹Am without the need for chemical separations. The relative merits of these three techniques were evaluated as they are applied in a nuclear waste material and spent nuclear fuel testing program by analytical (1) standards and (2) solutions prepared from the dissolution of glasses doped with²³⁷Np,²³⁹Pu, and²⁴¹Am. The uncertainty associated with technique was within ±4% for standards and ±10% for doped nuclear waste glasses. The methodology was then used to analyze three fully radioactive waste glasses.