Enantiomeric separation of citalopram analogues by HPLC using macrocyclic glycopeptide and cyclodextrin based chiral stationary phases

The enantiomeric separation of a novel series of twenty-eight racemic mixtures of citalopram analogues was performed by high performance liquid chromatography (HPLC). Due to the effectiveness of citalopram as an antidepressant drug, the development of new compounds based on its chemical structure is interesting, and their enantiomeric separation is needed to allow further pharmacokinetic studies. Several bonded cyclodextrin (both native and derivatized) and macrocyclic glycopeptide based chiral stationary phases (CSPs) were evaluated for their ability to separate this set of compounds via HPLC. Polar ionic, polar organic, and reversed phase modes were tested. Twenty-five of the racemic mixtures were separated with resolutions and enantiomeric selectivities up to 2.9 and 1.33, respectively. A total of eighteen baseline separations were achieved, while seven compounds were partially separated. Vancomycin based columns operated in the polar ionic mode resulted in the greatest number of separations. Lastly, the chromatographic behaviors of similar compounds were compared based on their chemical structure and also on the chiral selectors used.     

Analysis of poly-beta-hydroxybutyrate in environmental samples by GC-MS/MS

Application of gas chromatography-mass spectrometry (GC-MS) can significantly improve trace analyses of compounds in complex matrices from natural environments compared to gas chromatography only. A GC-MS/MS technique for determination of poly-beta-hydroxybutyrate (PHB), a bacterial storage compound, has been developed and used for analysis of two soils stored for up to 319 d, fresh samples of sewage sludge, as well as a pure culture of Bacillus megaterium. Specific derivatization of beta-hydroxybutyrate (3-OH C4:0) PHB monomer units by N-tert-butyl-dimethylsilyl-N-methyltrifluoracetamide (MTBSTFA) improved chromatographic and mass spectrometric properties of the analyte. The diagnostic fragmentation scheme of the derivates tert-butyldimethylsilyl ester and ether of beta-hydroxybutyric acid (MTBSTFA-HB) essential for the PHB identification was shown. The ion trap MS was used, therefore the scan gave the best sensitivity and with MS/MS the noise decreased, so the S/N was better and also with second fragmentation the amount of ions increased compared to SIM. The detection limit for MTBSTFA-HB by GC-MS/MS was about 10(-13) g microL(-1) of injected volume, while by GC (FID) and GC-MS (scan) it was around 10(-10) g microL(-1) of injected volume. Sensitivity of GC-MS/MS measurements of PHB in arable soil and activated sludge samples was down to 10 pg of PHB g(-1) dry matter. Comparison of MTBSTFA-HB detection in natural soil sample by GC (FID), GC-MS (scan) and by GC-MS/MS demonstrated potentials and limitations of the individual measurement techniques.     

Additions of enantiopure alpha-sulfinyl carbanions to (S)-N-sulfinimines: asymmetric synthesis of beta-amino sulfoxides and beta-alphamino alcohols

The addition of the lithium anions derived from (R)- and (S)-methyl and -ethyl p-tolyl sulfoxides to (S)-N-benzylidene-p-toluenesulfinamide provides an easy access route to enantiomerically pure beta-(N-sulfinyl)amino sulfoxides. Stereoselectivity can be achieved when the configurations at the sulfur atoms of the two reagents are opposite (matched pair), thus resulting in only one diastereoisomer, even for the case in which two new chiral centers are created. The N-sulfinyl group primarily controls the configuration of the carbon bonded to the nitrogen, whereas the configuration of the alpha-sulfinyl carbanion seems to be responsible for the level of asymmetric induction, as well as for the configuration of the new stereogenic C-SO carbon in the reactions with ethyl p-tolyl sulfoxides. An efficient method for transforming the obtained beta-(N-sulfinyl)amino sulfoxides into optically pure beta-amino alcohols, based on the stereoselective non-oxidative Pummerer reaction, is also reported.     

Investigation of the primary photodynamics of the aqueous formate anion

We have investigated the primary photodynamics of the aqueous formate anion using femtosecond transient absorption spectroscopy. The formate anions are excited at 200 nm, and the resulting products are probed in the region 200-650 nm. The ultraviolet part of the transient spectrum compares favorably with that of O-(aq). However, its counter radical, HCO(aq), is not observed. In the visible region hydrated electrons are observed. The electrons are produced from photodetachment of the formate anions and from two-photon ionization of water.     

Comparative reactivity of TpRu(L)(NCMe)Ph (L = CO or PMe3): impact of ancillary ligand l on activation of carbon-hydrogen bonds including catalytic hydroarylation and hydrovinylation/oligomerization of ethylene

Complexes of the type TpRu(L)(NCMe)R [L = CO or PMe3; R = Ph or Me; Tp = hydridotris(pyrazolyl)borate] initiate C-H activation of benzene. Kinetic studies, isotopic labeling, and other experimental evidence suggest that the mechanism of benzene C-H activation involves reversible dissociation of acetonitrile, reversible benzene coordination, and rate-determining C-H activation of coordinated benzene. TpRu(PMe3)(NCMe)Ph initiates C-D activation of C6D6 at rates that are approximately 2-3 times more rapid than that for TpRu(CO)(NCMe)Ph (depending on substrate concentration); however, the catalytic hydrophenylation of ethylene using TpRu(PMe3)(NCMe)Ph is substantially less efficient than catalysis with TpRu(CO)(NCMe)Ph. For TpRu(PMe3)(NCMe)Ph, C-H activation of ethylene, to ultimately produce TpRu(PMe3)(eta3-C4H7), is found to kinetically compete with catalytic ethylene hydrophenylation. In THF solutions containing ethylene, TpRu(PMe3)(NCMe)Ph and TpRu(CO)(NCMe)Ph separately convert to TpRu(L)(eta3-C4H7) (L = PMe3 or CO, respectively) via initial Ru-mediated ethylene C-H activation. Heating mesitylene solutions of TpRu(L)(eta3-C4H7) under ethylene pressure results in the catalytic production of butenes (i.e., ethylene hydrovinylation) and hexenes.     

MORPHOLOGY EVOLUTION IN PTFE AS A FUNCTION OF MELT TIME AND TEMPERATURE Ⅰ. HIGH MOLECULAR WEIGHT SINGLE- AND MULTI-MOLECULE FOLDED CHAIN SINGLE CRYSTALS AND BAND STRUCTURES

The effect of sintering dispersed dispersion and nano-emulsion particles of high molecular weight polytetrafluoroethylene (PTFE) on a substrate as a function of "melt" time and temperature is described. Folded chain single crystals parallel to the substrate and as ribbons on-edge (with double striations), as well as bands, are produced for longer sintering times; particle merger and diffusion of individual molecules, crystallizing as folded chain, single (or few) molecule,single crystals when "trapped" on the substrate by cooling occur for shorter sintering times. It is suggested the observed structures develop with sintering time, in a mesomorphic melt. The structure of the nascent particles is also discussed.     

Femtosecond midinfrared study of aggregation behavior in aqueous solutions of amphiphilic molecules

We study the spectral and orientational dynamics of HDO molecules in aqueous solutions of different concentrations of tertiary butyl alcohol (TBA) and trimethylamine-N-oxide (TMAO). The spectral dynamics is investigated with femtosecond two-dimensional infrared spectroscopy of the O-H stretch vibration of HDO:D(2)O, and the orientational dynamics is studied with femtosecond polarization-resolved pump-probe spectroscopy of the O-D stretch vibration of HDO:H(2)O. Both the spectral and orientational dynamics are observed to show bimodal behavior: part of the water molecules shows spectral and orientational dynamics similar to bulk liquid water and part of the water molecules displays a much slower dynamics. For low solute concentrations, the latter fraction of slow water increases linearly as a function of solute molality, indicating that the slow water is contained in the solvation shells of TBA and TMAO. At higher concentrations, the fraction of slow water saturates. The saturation behavior is much stronger for TBA solutions than for TMAO solutions, indicating the aggregation of the TBA molecules.     

A tetrathiafulvalene–perylene diimide conjugate prepared via click chemistry

A new tetrathiafulvalene (TTF)–perylene diimide (PDI) conjugate is prepared from an azide-functionalized TTF and an acetylenic PDI employing a Cu(I)-catalyzed Huisgen-Meldal-Sharpless reaction (‘click chemistry’). Thus, the TTF donor and PDI acceptor units are linked together by a 1,2,3-triazole unit. The molecules are found to assemble on a mica surface, forming fibrilar structures.     

Synthesis of Oxacyclic Scaffolds via Dual Ruthenium Hydride/Brønsted Acid‐Catalyzed Isomerization/Cyclization of Allylic Ethers

A ruthenium hydride/Brønsted acid‐catalyzed tandem sequence is reported for the synthesis of 1,3,4,9‐tetrahydropyrano[3,4‐b]indoles (THPIs) and related oxacyclic scaffolds. The process was designed on the premise that readily available allylic ethers would undergo sequential isomerization, first to enol ethers (Ru catalysis), then to oxocarbenium ions (Brønsted acid catalysis) amenable to endo cyclization with tethered nucleophiles. This methodology provides not only an attractive alternative to the traditional oxa‐Pictet–Spengler reaction for the synthesis of THPIs, but also convenient access to THPI congeners and other important oxacycles such as acetals.     

Cascade cyclizations via N,4-didehydro-2-(phenylamino)pyridine biradicals/zwitterions generated from enyne-carbodiimides

Thermolysis of the enyne-carbodiimides 7 having the central carbon-carbon double bond incorporated as part of the cyclopentene ring favors the formation of the corresponding N,4-didehydro-2-(phenylamino)pyridine intermediates, either as the sigma,pi-biradicals 8 or as the zwitterions 8', for subsequent synthetic elaborations. By placing appropriate substituents at the acetylenic terminus, a variety of the intramolecular decay routes are available for the initially formed sigma,pi-biradicals/zwitterions, leading to the 5,6-dihydrobenzo[c][1,8]naphthyridine 21, the 1,2,3,4-tetrahydro[1,8]naphthyridine 24 and related compounds 25 and 26, the 5,6-dihydrobenz[f]isoquinoline 28, and the benzofuro[3,2-c]pyridine 30. Surprisingly, the use of the dimethylamino group of the 2-(dimethylamino)phenyl substituent to capture the carbocationic center in the zwitterion 8e' furnished the 5H-pyrido[4,3-b]indole 32 in only 14% yield. The majority of the products were the 1H-pyrrolo[2,3-b]quinolines 34 and 35, isolated in 48 and 7% yields, respectively. However, it was possible to redirect the reaction toward 32 by conducting thermolysis of the enyne-carbodiimide 7e in the presence of 5 equiv of dimethylphenylsilyl chloride. Under this reaction condition, the 2-pyridone imine 37 was isolated in 86% yield, which on exposure to silica gel was converted to 32 in essentially quantitative yield. Thermolysis of the enyne-carbodiimide 42 having a methoxymethyl substituent at the acetylenic terminus led to the formation of 46' as a pyridine analogue of ortho-quinone methide imine. An intramolecular hetero-Diels-Alder reaction of 46' then furnished the tetrahydro[1,8]naphthyridino[2,1-c][1,4]benzoxazine 47.