Enantioselective reversed-phase and non-aqueous capillary electrochromatography using a teicoplanin chiral stationary phase

Enantiomeric separation of chiral pharmaceuticals is carried out in aqueous and non-aqueous packed capillary electrochromatography (CEC) using a teicoplanin chiral stationary phase (CSP). Capillaries were slurry packed with 5 microm 100-A porous silica particles modified with teicoplanin and initially evaluated using a non-aqueous polar organic mode system suitability test for the separation of metoprolol enantiomers (Rs = 2.3 and 53000 plates m(-1)). A number of pharmaceutical drugs were subsequently screened with enantioselectivity obtained for 25 racemic solutes including examples of neutral, acidic and basic molecules such as coumachlor (Rs = 3.0 and 86000 plates m(-1)) and alprenolol (Rs = 3.3 and 135000 plates m(-1)) in reversed-phase and polar organic mode, respectively. A statistical experimental design was used to investigate the effects of non-aqueous polar organic mobile phase parameters on the CEC electroosmotic flow, resolution and peak efficiency for two model solutes. Results primarily indicated that higher efficiency and resolution values could be attained at higher methanol contents which is similar to findings obtained on this phase in liquid chromatography.     

High stereocontrol in aldol reaction with ketones: enantioselective synthesis of beta-hydroxy gamma-ketoesters by ester enolate aldol reactions with 2-acyl-2-alkyl-1,3-dithiane 1-oxides

The asymmetric aldol reaction of 1,2-diketones, masked as nonracemic 2-acyl dithiane oxides, with lithium enolates derived from several esters and lactones, proceeds with a high degree of stereocontrol at both carbonyl and enolate prochiral centers, the stereocontrol mainly determined by the configuration of the sulfoxide sulfur atom. The sense of induced stereochemistry observed for ester enolates is different from that seen for lactone enolates. Hydrolysis of the dithiane oxide units of the major diastereoisomerically pure aldol products affords enantiomerically pure tertiary alpha-substituted beta-hydroxy-gamma-ketoesters.     

High-Performance Liquid Chromatographic Separation of Stereoisomers of <Emphasis Type="Bold">β</Emphasis>-Amino Acids and a Comparison of Separation Efficiencies on Chirobiotic T and TAG Columns

Direct and indirect reversed-phase high-performance liquid chromatographic methods were developed for the separation of enantiomers of seventeen unnatural β-amino acids, including several β-3-homo amino acids. The direct separations of the underivatized analytes were performed on chiral stationary phases containing macrocyclic glycopeptide antibiotic teicoplanin (Chirobiotic T column) and teicoplanin aglycone (Chirobiotic TAG column). The indirect method involved pre-column derivatization with two new chiral derivatizing agents, (1S,2S)-1,3-diacetoxy-1-(4-nitrophenyl)-2-propylisothiocyanate, (S,S)-DANI and (S)-N-(4-nitrophenoxycarbonyl)phenylalanine methoxyethyl ester, (S)-NIFE. The different methods were compared in systematic chromatographic examinations. The effects of organic modifier, mobile phase composition, pH and flow rate on the separation were investigated.     

LB films of rodlike phthalocyanine aggregates: specular X-ray reflectivity studies of the effect of interface modification on coherence and microstructure

We present here X-ray specular reflectivity (XRR) characterization of the ordering of Langmuir-Blodgett films of the liquid crystalline phthalocyanine (Pc) 2,3,9,10,16,17,23,34-octakis(2-benzyloxyethoxy)copper(II) phthalocyanine, 1, on Si(100) wafers with a native oxide layer and these same substrates modified with monolayers of varying percentages of methyl- and phenyl-terminated silanes. The central copper atom in these Pc's provides for high contrast in X-ray reflectivity for single-bilayer films of 1. The XRR data are modeled as arising from multiple layers of organic material, above and below the rows of copper atoms in the aligned Pc cores; variations in the total thickness of these films, and the spacing between the rows of copper atoms, are attributed to changes in the interaction with the substrate, and changes in the Pc orientation and side chain packing. The most pronounced effect on these parameters comes from variations in the ratio of the phenyl-silane versus methyl-silane content of the substrate modifiers and annealing of these films past their crystalline (K) --> liquid crystalline (LC) mesophase transition temperature. Transfer of multiple bilayers of this Pc leads to additional changes in the thickness of each layer, eventually forming a hexagonal close-packed array, reminiscent of bulk fibers of this material, as revealed by X-ray diffraction (XRD).     

High-performance liquid chromatographic enantioseparation of 2-aminomono- and dihydroxycyclopentanecarboxylic and 2-aminodihydroxycyclohexanecarboxylic acids on macrocyclic glycopeptide-based phases

The direct separation of the enantiomers of four 2-aminomono- or dihydroxycyclopentanecarboxylic acids and four 2-aminodihydroxycyclohexanecarboxylic acids was performed on chiral stationary phases containing macrocyclic glycopeptide antibiotics such as teicoplanin (Astec Chirobiotic T and T2), teicoplanin aglycone (Chirobiotic TAG) or ristocetin A (Chirobiotic R) as chiral selectors. The effects of the nature of organic modifiers, the pH, the mobile phase composition and the structures of the analytes on the separation were investigated. Chirobiotic TAG, and in some cases Chirobiotic T, proved to be the most useful of these columns. The elution sequence was determined in most cases.     

Determination of the 2,3-pentadienedioic acid enantiomer interconversion energy barrier 1. Classical kinetic approach

A classical kinetic method was used to determine the energy barrier for the inter-conversion of 2,3-pentadienedioic acid enantiomers. Each individual enantiomer was isolated by collecting the appropriate peaks from the HPLC enantiomeric separation, of racemic 2,3-pentadienedioic acid. The isolated enantiomers were racemized at 22 degrees C using various interconversion times. The ratio of enantiomers in each reaction solution was determined by HPLC at 22 degrees C. The corresponding peak areas of the enantiomers and the interconversion times obtained from the HPLC chromatograms were used to calculate both the interconversion rate constants describing (+)--> (-) and (-) --> (+) interconversions as well as the energy barriers. It was confirmed that the interconversion of 2,3-pentadienedioic acid enantiomers is a firstorder kinetic reaction. Both semiempirical and ab initio methods were used to explore the mechanism of the interconversion of 2,3-pentadienedioic acid enantiomers, and to calculate the interconversion energy barrier. Comparison of the interconversion energy barriers found by the ab initio method (deltaG# = 110.7 kJ/mol) and by classical kinetics in the mobile phase solution at 22 degrees C (delta Gapp = 93.9+/-0.2 kJ/mol) shows a difference which may be attributed to the different conditions assumed in the theoretical calculation (i.e., a gaseous state) and the actual experimental conditions (i. e., liquid solution) and a possible catalytic effect of the solution composition.     

Evaluation and comparison of a methylated teicoplanin aglycone to teicoplanin aglycone and natural teicoplanin chiral stationary phases

HPLC enantiomeric separations of a wide variety of racemic analytes was evaluated using chiral stationary phases (CSPs) based on the macrocyclic glycopeptides teicoplanin (T), teicoplanin aglycone (TAG), and methylated teicoplanin aglycone (Me-TAG) in two different mobile phase modes, i.e., the RP mode and the polar organic (PO) mode. Comparison of the enantiomeric separations using Chirobiotic T, Chirobiotic TAG, and the methylated form of TAG were conducted in order to gain a better understanding of the roles of the polar functional groups on the CSP. Substantial effects due to the cleavage of saccharides and/or methylation on chiral separations were observed in both separation modes. Improved separation efficiencies for many acidic analytes were obtained by methylating the H-bonding groups of TAG. These groups were believed to be a contributing factor to band broadening on TAG due to their negative effect on mass transfer between the stationary phase and mobile phase. Ionic/dipolar interactions between the carboxylate group of the analytes and the amine groups on T, TAG, or Me-TAG are important for chiral discrimination. Therefore, analytes possessing a carboxyl group are good candidates for successful separations on these CSPs. Hydrophobic interactions are important for enantiomeric separations in the RP mode where the H-bonding interactions between analytes and the chiral selectors are relatively weak. Me-TAG offers higher hydrophobicity, which can accentuate the interactions of analytes with hydrophobic moieties, but these interactions are not necessarily stereoselective. In the PO mobile phase, electrostatic/dipolar interactions between polar functional groups are the dominating interactions in chiral recognition. Another important factor is steric fit, which could be changed with every modification of the T structure. Therefore, substantial changes of enantioseparations were obtained within this studied group of CSPs. The PO mode was shown to be the most powerful mobile phase mode for enantiomeric separations on T-based stationary phases, mainly due to the improved efficiency. Methylation of the TAG proved to be a very useful tool for investigating the chiral recognition mechanism for this group of chiral selectors.     

Synthesis,characterization and x-ray structure of V3(μ3-O)(μ-Cl)Cl6(μ-η1-η1-PhNHNH2)2(PhNHNH2)2(THF) · 6THF: A new binding mode for phenylhydrazine

Addition of phenylhydrazine to a mixture of VCl₃ · THF/N,N-propyl-bis (salicyladimine) and sodium hydride yielded a trinuclear vanadium complex, V₃(₃-O)(-Cl)Cl₆(-¹-¹PhNHNH₂)₂(PhNHN H₂)₂(THF), containing two bridging and two terminal phenylhydrazine ligands. The product has been crystallographically characterized (P2₁/n, a=12.949(2) Å,b=24.061(4) Å,c=22.504(4) Å, =107.22(1) deg.,V=6697(2) ų withZ=4) and was found to contain the first example of bridging monosubstituted hydrazine (phenylhydrazine) ligands.