In Situ Observation of Skeletal Shape Transition during BaB2O4 Crystal Growth in High-Temperature Solution

The transition from a fiat solid-liquid interface to a skeletal shape during BaB2O4 （BBO） single crystal growth in Li2B4O7 flux is observed in real time by an optical high-temperature in-situ observation system. The movement of crystal step is also investigated. The observation results demonstrate that the steps propagate along and parallel to the fiat interface when the crystal size is small. Nevertheless, they will ‘bend＇ close to the face centre if the crystal size becomes greater. Atomic force microscopy reveals that more deposition places near the face centre give rise to the bending of advancing steps and thus the formation of a vicinal interface structure. Measurements of step velocity show that the velocity keeps nearly constant at different moments for one specific step, whereas the step on a newly formed layer advanced faster than that on a previously formed one when the crystal size is larger than 210μm or so. Thus interracial morphological instability occurs and a skeletal interface is obtained.     

电热泵用于蔬菜温室供热的经济性分析

现代化蔬菜温室是我国都市农业发展中的一个重要组成部分，目前这类温室的冬季加热均以燃煤方式为主．伴随着越加严重的城市环境污染，温室供热系统也面临着改造问题，需要引入清洁供热方式，热泵供热是其中的一种．本文以上海地区现代化蔬菜温室为研究对象，分析了蔬菜温室中使用电热泵供热的运行成本，并与燃煤供热方式进行了对比．就热泵供热系统在温室中的应用前景及可行性、经济性进行了分析，为热泵在温室供热系统中的应用提供了可参考依据．     

NEW ALTERNATING DIRECTION FINITE ELEMENT SCHEME FOR NONLINEAR PARABOLIC EQUATION

A new alternating direction (AD) finite element (FE) scheme for 3-dimensional nonlinear parabolic equation and parabolic integro-differential equation is studied. By using AD, the 3-dimensional problem is reduced to a family of single space variable problems, calculation work is simplified; by using FE, high accuracy is kept; by using various techniques for priori estimate for differential equations such as inductive hypothesis reasoning, the difficulty arising from the nonlinearity is treated. For both FE and ADFE schemes, the convergence properties are rigorously demonstrated, the optimal H1-and L2-norm space estimates and the 0((△t)2) estimate for time variable are obtained.     

多功能旋流燃烧器的工业性试验研究

秦皇岛热电厂2＃锅炉燃烧不稳定、燃烧效率低等问题主要是由于燃烧器的一次风管道结构不合理造成的。本文采用多功能旋流燃烧器的设计思想对旋流燃烧器进行了技术改造和工业性试验研究。结果表明,改造后的旋流燃烧器其着火点提前,并且仅改造6只主力燃烧器就可以使锅炉在50％负荷时达到不投油而稳定燃烧,排烟温度、飞灰含碳量和NOx排放量明显下降。     

紧矩阵量子群G的余表示与其对偶量子群(A)的关系

设 G=（A,△）为紧矩阵量子群,G为A的所有有限维光滑的、不可约余表示等价类的集合.本文通过（A,△）的一个余表示Vo构造了两个相互配对的集合,利用Hilbert C＊-模的理论证明它们分别为A和Baaj与Skandalis构造的量子群A,并且证明了对任意的α∈G,在A中都对应一个有限维投影算子Pα,满足 dim（α）=dim（pα）.     

采用热处理方法提高MEH-PPV单层聚合物有机发光二极管发光性能的研究

对以MEH－PPV为发光层的单层聚合物有机发光二极管（OLED）器件在最佳条件下进行真空热处理，并用金相显微镜观察施加电压后器件的阴极表面形貌。发现处理后的器件阴极表面的气泡及黑斑明显减少。器件的发光性能显著提高。与未经处理的器件相比，最大相对发光强度提高了一个数量级、启亮电压降低了2．0V，半寿命提高了12．7倍。初步分析表明热处理方法提高器件发光性能的主要原因在于有效地减少了器件在工作过程中由于焦耳热产生的某些气体，从而减少阴极表面气泡及黑斑的出现，另一方面，热处理方法也增强了有机发光层与阴极接触界面的结合力，提高电子注入水平。     

Analysis of saltation characteristics of bed-load transport in flowing water

The study of bed-load transport is of great significance both in theory and in practice. This paper discusses the saltation of bed-load solid grains in flowing water. Experiments and theoretic analysis have been made by means of high-speed photographing and advanced data processing technique with a combined method based on mechanical and statistical theories. It indicates that the saltation is the main form of the bed-load transport under ordinary flowing conditions. In the meantime, taking successive saltation as the model of bed-load transport, systematic analysis has been made with regard to the kinematic properties and mechanism of saltation. The statistical analysis shows that the probability density functions of the relative height and length of saltation are in conformity with Γ-type distribution, while the probability density functions of the relative velocities of saltation are in conformity with the Gaussian distribution. The project supported by National Natural Science Foundation of China     

一类退化型Schrodinger方程解的连续性

该文通过一种基本的分析方法,得到了一类退化型Schrodinger方程解的连续性结果,方程的类型为:Lu+vu=(f_i)_{x_i},其中L为一退化椭圆算子,v属于某一Kato类的类比,而f_i 属于某一加权L^p空间.     

等温平台石墨炉原子吸收光谱法测定高纯镍中痕量杂质锑

利用石墨炉原子吸收法，在等温平台条件下直接测定高纯镍中的痕量杂质锑，对石墨炉加热程序中的干燥时间、灰化温度及原子化温度进行了优化，同时考察了介质酸度的影响。试验表明，基体镍对锑的测定有显著的影响，为此进行了标准系列基体匹配。该法的特征质量为6．6pg；相对标准偏差为6．5％；加标回收率为100％-103％。     

Crystallographic report: Bis[bis(N,N‐dibenzyldithiocarbamato)cadmium(II)]

The centrosymmetric structure of {Cd[S₂CN(CH₂Ph)₂]₂}₂ features both bridging and chelating dithiocarbamate ligands so that a square pyramidal S₅ coordination geometry results. Copyright © 2004 John Wiley & Sons, Ltd.