彩色透明微晶玻璃的吸收光谱

在Li2O-Al2O3-SiO2系统玻璃中掺入少量晶核剂TiO2,ZrO2,P2O5，再掺入稀土离子和过渡金属离子作为着色剂，在高温下溶制得到彩色透明玻璃，对上述玻璃进行微晶化处理，用差热分析（DTA）确定其晶化温度，测定与讨论了所获彩色透明微晶玻璃在紫外波段至近红外波段的吸收光谱特性，研究结果表明，玻璃微晶化后，由于基质玻璃对光的微弱散射，引起吸收的增强，但不改变稀土离子和过渡金属离子的本征吸收峰位。     

无催化纳米氧化锌的制备及其光学性质研究

本文采用无催化剂直接蒸发高纯Zn粉,在800℃氧气氛条件下,在Si(111)衬底上生长得到以四角状为主的纳米ZnO(T-ZnO)。T-ZnO纳米线每个角约互成110°,长度约为1.5μm,直径100nm左右;Raman分析表明E2(H)普遍存在于各形态的ZnO;光致发光光谱表明,T-ZnO纳米线的光致发光除了与材料性质有关,还与杂质缺陷有关,蓝绿光带是ZnO的缺陷产生的。     

A New theory for evaluating the number density of inclusions in films

A new formulation derived from thermal characters of inclusions and host films for estimating laser induced damage threshold has been deduced. This formulation is applicable for dielectric films when they are irradiated by laser beam with pulse width longer than tens picoseconds. This formulation can interpret the relationship between pulse-width and damage threshold energy density of laser pulse obtained experimentally. Using this formulation, we can analyze which kind of inclusion is the most harmful inclusion. Combining it with fractal distribution of inclusions, we have obtained an equation which describes relationship between number density of inclusions and damage probability. Using this equation, according to damage probability and corresponding laser energy density, we can evaluate the number density and distribution in size dimension of the most harmful inclusions.     

0.351μm激光辐照Au盘靶吸收、散射规律的实验研究

在“星光Ⅱ”激光装置上，利用80只分立式探测器研究了约0.8ns，0.351μm激光辐照Au盘靶的吸收、散射．结果表明，强度约为5×10¹⁴W/cm²的激光以10°角入射，吸收可达90%以上；但是，以45°角入射，吸收仅为75%左右，散射高达25%．散射主要来自未被等离子体充分吸收的激光在弯曲临界面上的反射，同时伴随少量受激布里渊散射．吸收的理论计算与实验结果进行了比较，两者符合较好． 关键词：     

Autocorrelation Function of Hydrogen Atoms in Magnetic Fields

The autocorrelation function is an important quantity that can reflect the dynamical properties of the Rydberg wave packet and can be measured in experiments. Applying time-dependent perturbation theory and rotating wave approximation, we derive the autocorrelation function of the double-pulse laser describing the evolution of a Rydberg wave packet of hydrogen atoms in magnetic fields. The resulting expression is written as a sum of the modified Caussian terms. Each Caussian term comes from a parent semiclassical closed orbit. It provides a direct explanation and experimentally controllable measurement scheme, which allows us therefore to recognize the closed orbit and to determine its returning time in high precision.     

CSR外靶实验终端中子流测量的模拟

随着兰州重离子加速器冷却储存环(HIRFL-CSR)外靶实验终端中子墙的建立, 为实验测量高能中子提供了机遇. 为确定CSR外靶实验终端对中子流测量的可行性, 基于BUU理论模型分别对对称系统(Ni+Ni, Pb+Pb)和非对称系统(Pb+Ni)进行了模拟计算, 发现当系统能量达到几百MeV/u时, 中子流信号相当明显, 并与碰撞参数有明显的依赖关系. 模拟结果表明, 在前角20°的覆盖范围内, 可以较好地实现中子流测量所需要的反应平面确定及碰撞参数选择. 对双击事件及其对中子流的影响进行了简单的讨论.     

Moderate and Small Deviations for the Ranges of One-Dimensional Random Walks

We establish moderate and small deviations for the ranges of integer valued random walks. Our theorems apply to the limsup and the liminf laws of the iterated logarithm. We establish moderate and small deviations for the ranges of integer valued random walks. Our theorems apply to the limsup and the liminf laws of the iterated logarithm.     

Bloch Oscillations of Two-Component Bose-Einstein Condensates in Optical Lattices

We study the Bloch oscillations of two-component Bose-Einstein condensates trapped in spin-dependent optical lattices. The influence of the intercomponent atom interaction on the system is discussed in detail Accelerated breakdown of the Bloch oscillations and revival phenomena are found respectively for the repulsive and attractive case. For both the cases, the system will finally be set in a quantum self-trapping state due to dynamical instability.     

In Situ Observation of Skeletal Shape Transition during BaB2O4 Crystal Growth in High-Temperature Solution

The transition from a fiat solid-liquid interface to a skeletal shape during BaB2O4 （BBO） single crystal growth in Li2B4O7 flux is observed in real time by an optical high-temperature in-situ observation system. The movement of crystal step is also investigated. The observation results demonstrate that the steps propagate along and parallel to the fiat interface when the crystal size is small. Nevertheless, they will ‘bend＇ close to the face centre if the crystal size becomes greater. Atomic force microscopy reveals that more deposition places near the face centre give rise to the bending of advancing steps and thus the formation of a vicinal interface structure. Measurements of step velocity show that the velocity keeps nearly constant at different moments for one specific step, whereas the step on a newly formed layer advanced faster than that on a previously formed one when the crystal size is larger than 210μm or so. Thus interracial morphological instability occurs and a skeletal interface is obtained.