Studies on the Interaction of Beryllon Ш with Proteins by Voltammetric Technique and its Application

A new quantitative determination method of proteins using beryllon Ш by voltammetric technique was developed in this paper. In pH 3.5 Britton-Robinson (B-R) buffer solution, beryllon Ш can bind with human serum albumin (HSA) to form an electro-inactive supermolecular complex. Beryllon Ш has a well-defined voltammetric reduction peak at -0.38 V (vs. SCE) and the addition of protein in this solution can cause the decrease of the reductive peak current. Based on the decrease of the reduction peak current, a new electrochemical method for the determination of HSA was established with linear range of 1.0~40.0 mg/L and the detection limit of 1.0 mg/L. This method is further applied to the determination of real sample of healthy human serum.     

气相色谱-三重四极杆串联质谱法快速测定蔬菜水果中129种农药的残留量

采用QuEChERS方法结合气相色谱-串联质谱法(GC-MS/MS)建立了蔬菜、水果中129种农药残留同时检测的分析方法。试样用1%乙酸乙腈均质提取,采用混合型固相分散萃取剂净化后,用GC-MS/MS在多反应离子监测(MRM)模式下进行检测,外标法定量。结果表明,129种药物在一定的含量范围内线性关系良好,相关系数(r2)均大于0.98;不同基质在10 μg/kg添加水平下大部分农药的平均回收率为66.2%～124.7%,相对标准偏差(RSD)为0.9%～24.4%;方法的定量限(LOQ)为0.03～16.7 μg/kg。结果表明,该方法简便快速、灵敏可靠、经济有效,适用于蔬菜、水果中农药多残留的同时快速筛查测定。     

盐酸异丙肾上腺素与牛血清白蛋白相互作用

采用荧光猝灭法和毛细管区带电泳法研究了盐酸异丙肾上腺素（IH）与牛血清白蛋白（BSA）的相互作用。荧光猝灭法研究表明:IH对BSA有较强的荧光猝灭作用,根据Stern-Volmer方程得到猝灭速率常数（K_q）为2.53×10¹³ L·mol^-1·s^-1,该荧光猝灭属于静态猝灭。采用位点结合模型公式计算得结合常数为1.72×10⁴ L·mol^-1,结合位点数n为1;毛细管区带电泳法研究表明:IH与BSA的结合常数为4.07×10⁴ L·mol^-1,结合位点数n为1。     

氨基化多壁碳纳米管的制备与表征

以多壁碳纳米管(MWNTs)为原料,经自由基反应,制备了氰基改性的多壁碳纳米管,然后采用Al-NiCl2.6H2O-THF体系还原氰基得到了氨基化的碳纳米管。通过拉曼光谱仪、热重分析仪、X射线光电子能谱仪和透射电子显微镜对产物的结构与形貌进行了表征。结果表明:氨基通过共价键枝接在MWNTs的表面,氨基化多壁碳纳米管每1000个表面碳原子中有17.1个转化为氨基;该反应条件温和,反应时间短,且不破坏MWNTs的结构。     

硼的添加对Ti0.26Zr0.07V0.24Mn0.1Ni0.33贮氢合金结构和电化学性能的影响

Ti0.26Zr0.07V0.24Mn0.1Ni0.33Bx(x=0~0.10)系列合金均有V基固溶体相和C14型Laves相两相组成。添加B可提高Ti0.26Zr0.07V0.24Mn0.1Ni0.33合金的放电容量,Ti0.26Zr0.07V0.24Mn0.1Ni0.33B0.1合金电极在60 mA·g-1电流放电时的放电容量达到476.7 mAh·g-1。B的添加不同程度地降低了合金的高倍率放电性能,使合金电极表面上电化学反应的电荷转移电阻(R ct)显著增加,交换电流密度(I0)显著降低。添加B可显著改善Ti0.26Zr0.07V0.24Mn0.1Ni0.33合金电极的高温放电性能,Ti0.26Zr0.07V0.24Mn0.1Ni0.33B0.025合金电极在343 K高温下其放电容量达到525.6 mAh·g-1。     

惰性化学键活化与重组

惰性化学键的活化与重组是近几年来非常热门的研究领域, 同时这个领域也非常富有挑战性. 本文以麻生明教授为首席的国家重点基础研究发展项目（973项目）“惰性化学键的选择性激活、重组及其控制”为基础, 阐述了惰性碳-杂原子键, 碳-氢键, 碳-碳键, 二氧化碳和氧气小分子四个方面的活化和重组, 介绍了一些催化合成的新方法. 这些新方法在完成惰性化学键活化和重组的同时, 也注重于降低污染, 使用更温和的条件, 提高了原子经济性, 为可持续发展战略提供了强有力的技术支持.     

氧杂环丁烷系列含能粘合剂的合成研究进展

新型含能粘合剂的出现进一步提高了固体推进剂的能量和性能。其中,在3-位取代含能基团实现氧杂环丁烷的含能化并以此类单体合成的含能粘合剂,由于其具有相对分子量和官能度可控性好、多分散性和玻璃化转变温度低而受到重视,引起广泛关注。     

以卡那霉素为选择剂对盐酸地匹福林的毛细管电泳拆分

本研究以卡那霉素作为手性选择剂,采用毛细管电泳法对盐酸地匹福林对映体进行手性拆分,并对分离条件进行优化。考察了卡那霉素的浓度、缓冲溶液pH值、柱温及有机添加剂等因素对分离的影响。优化分离条件为:卡那霉素浓度0.6%;有机添加剂5%:乙腈-甲醇混合物(体积比9∶1);20mmol/L pH=2的磷酸盐缓冲溶液;进样:25psi×2s;分离电压+20kV;检测波长262nm;柱温25℃。在此优化分离条件下,盐酸地匹福林实现基线分离。该方法操作简便,可用于盐酸地匹福林对映体的分离。     

Empetrifranzinans A和Empetrifranzinans C的全合成及其抗肿瘤活性

以间苯三酚为起始原料,L-脯氨酸为催化剂,经由两步反应首次合成了Empetrifranzinans A(1a,总收率60%)和Empetrifranzinans C(总收率55%),其结构经1H NMR,13C NMR和HR-MS确证。初步药理筛选实验结果表明,1a对人结肠癌、肝癌、胃癌、肺腺癌、卵巢癌细胞表现出了较强的细胞毒作用,其IC50分别为<0.1,1.31,4.90,8.98和3.65μmol·L-1。     

Catalytic effect analysis of metallic additives on light crude oil by TG and DSC tests

This research aimed at the investigation of the effect of different metallic additive on the combustion and kinetic behavior of crude oil. For this purpose, the thermal behavior of the oil-only and oil–metallic salts mixtures were studies by the thermogravimetry (TG)/derivative thermogravimetry and differential scanning calorimetry (DSC) on heating rate at 10 °C min^?1. The result shows that Dagang crude oil exhibited apparent low temperature oxidation (LTO), fuel deposition, and high temperature oxidation processes. With the addition of metallic salts, the LTO process has been shortened and samples added CuSO₄, CrCl₃·6H₂O, and AlCl₃·6H₂O achieved a much lower peak temperature than that of oil. Based on the Arrhenius model, metallic additives were proven to have obvious influence on the combustion activation energy. And, by comprehensive analysis of TG/DSC profile and activation energy, ZnSO₄ exhibited a positive influence on light crude oil combustion during the high pressure air injection process.