Oxidation of Styrene with Molecular Oxygen in Supercritical CO2

The oxidation of styrene with molecular oxygen catalyzed by PdCl2 CuCl2 has been investigated in supercritical CO2 with a batch reactor. The oxidative system of styrene contains four components at the beginning and seven components during the reaction. The critical temperature, critical pressure, and critical density at different conversions are determined by using a high-pressure view cell. The effect of phase behavior on the conversion and selectivity were studied. Experimental results showed that the critical parameters of the reaction mixture at fixed initial molar ratio changed with the conversion of reactant. The conversion of styrene reached maximum near the critical density of the reaction mixture. Product selectivity also varied with density of reaction mixture and could be tuned to some degree.     

Application of Et3NHCl-AlCl3 Ionic Liquid as an Initiator in Cationic Copolymerization of 1, 3-Pentadiene with Styrene

Room temperature ionic liquids (RTILs) as advanced, technological solvents can be designed to fit a particular application. They used as green “media and/or catalysts” for chemical synthesis have been extensively reviewed recently. RTILs1 not only show …     

醇脱氢酶结构和作用机理研究进展

介绍了醇脱氢酶的种类, 酵母醇脱氢酶和肝醇脱氢酶等两类常用的醇脱氢酶的物理化学性质和活性位点结构. 归纳了对肝醇脱氢酶和酵母醇脱氢酶作用机理的研究, 重点评述了醇脱氢酶催化反应中的两个关键步骤质子转移和氢化物转移过程机理的研究进展.     

Determining PPARγ-ligand binding affinity using fluorescent assay with cis-parinaric acid as a probe

Upon the study of small-molecules binding to proteins, the traditional methods for calculating dissociation constants (Kd and Ki) have shortcomings in dealing with the single binding site models. In this paper, two equations have been derived to solve this problem. These two equations are independent of the total concentration or initial degree of saturation of receptor and the activity of the competitive molecule. Through nonlinear fitting against these two equations, Kd value of a probe can be obtained by binding assay, and Ki value of a ligand can be obtained by competitive assay. Moreover, only the total concentrations of receptor([R]t), ligand([L]t) and probe([P]t) are required for the data fitting. In this work, Ki values of some typical ligands of PPARγ were successfully determined by use of our equations, among which the Ki value of PPARγ-LY171883 was reported for the first time.     

高锰酸盐指数的灰色GM(1,1)预测

以中山市岐江河近7年的高锰酸盐指数监测数据为基础，采用灰色系统理论中的预测方法，建立了岐江河高锰酸盐指数的灰色预测模型。用该模型预测岐江河2006年、2007年、2008年高锰酸盐指数的值分别为5．3，5．4和5．4。     

Optical Spectroscopy Properties of KMgF3 ：Eu^2＋ Nanocrystals and Powder Synthesized by Microemulsion and Solvothermal Process

IntroductionPerovskite complex fluorides have attracted great ainterest due to their particular physical properties, suchas piezoelectric characteristics[1], ferromagnetic prop-erty[2], nonmagnetic insulator behavior[3], and photo-luminescence host functi…     

铱(III)离子催化铈(IV)离子氧化四氢糠醇的动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在痕量铱(III)离子催化作用下，于298~313 K区间氧化四氢糠醇(THFA)的反应动力学. 结果表明，反应对铈(IV)离子为一级，对铱(III)离子也为一级，对四氢糠醇的表观反应级数为正分数. 准一级速率常数kobs随[H+]增加而增大，而随[HSO₄－]增加而减小. 在氮气保护下，反应能引发丙烯腈聚合，说明在反应中有自由基产生. 通过kobs与[HSO₄－]的依赖关系，找到本反应体系的动力学活性物种是Ce(SO₄)₂，并计算出平衡常数，速控步骤的速率常数及相应的活化参数.     

新型酰腙类荧光探针的合成及其对Al(Ⅲ)的传感性质

合成了两个酰腙类荧光探针1和2,在DMSO-H_2O(7∶3,体积比)体系中,两者分别在478 nm和460 nm处对Al~(3+)具有较好的荧光选择识别作用。Job's法、核磁滴定、质谱分析表明,探针1和2与Al~(3+)的配位比均为1∶2,且对Al~(3+)的检出限分别为9.58×10~(-8) mol/L和6.52×10~(-8) mol/L。同时提出了探针1和2对Al~(3+)的荧光传感机理。实际应用研究表明,探针1和2可用于河水和自来水中一定浓度范围内Al~(3+)的检测。     

立规聚甲基丙烯酸热表征研究

本文对不同立构的聚甲基丙烯酸(PMAA)进行了热表征。实验结果表明,在30℃～200℃内未出现玻璃化转变。间同PMAA分别在-245℃和-280℃发生脱水反应和脱羧,而全同PMAA只在-185℃观察到脱水反应。这种热稳定性的明显差别与不同立构PMAA链上相邻羧酸距离有关。实验数据证实PMAA脱水反应为无规反应,服从一级动力学反应方程。脱水温度和间同立构含量成正比,脱水反应活化能间同PMAA比全同PMAA高～7Kcal/mol。     

聚苯基不对称三嗪的热分解

用高分辨裂解气相色谱－质谱（ＨＲＰｙＧＣ－ＭＳ）考察了由对苯二眯腙和四种不同芳香族四酮合成的聚苯基不对称三嗪的热分解行为，鉴定了相应裂解产物的组成、分布及其与高分子结构的关系，并用热重法（ＴＧ）测定了它们的热分解反应动力学参数，提出了其热分解反应机理．