新型酰腙类荧光探针的合成及其对Al(Ⅲ)的传感性质

合成了两个酰腙类荧光探针1和2,在DMSO-H_2O(7∶3,体积比)体系中,两者分别在478 nm和460 nm处对Al~(3+)具有较好的荧光选择识别作用。Job's法、核磁滴定、质谱分析表明,探针1和2与Al~(3+)的配位比均为1∶2,且对Al~(3+)的检出限分别为9.58×10~(-8) mol/L和6.52×10~(-8) mol/L。同时提出了探针1和2对Al~(3+)的荧光传感机理。实际应用研究表明,探针1和2可用于河水和自来水中一定浓度范围内Al~(3+)的检测。     

电极材料对NPB/Alq3有机电致发光器件性能的影响

采用不同材料作为有机电致发光器件(OELDs)的电极, 制备了基本结构为[阳极/NPB(40 nm)]/Alq3(50 nm)/阴极]的异质结双层器件, 并通过改变OELDs器件的阴极或阳极来研究电极材料对器件光电性能的影响. 研究结果表明, 各器件电流-电压(I-V)关系的基本特征与陷阱电荷限制电流(TCLC)机制的拟合情况相符. 由于有机材料本身能级的无序性以及载流子迁移率对温度和电场的依赖性, 不同电极的载流子注入能力与其功函数并无直接关系. 双层器件中由于空穴传输层的引入, 使得载流子复合区域位于有机层异质结界面处, 降低了金属阴极对激子的猝灭作用, 从而大大提高了器件性能. 此外, 金属电极OLEDs器件结构具有的微腔效应会导致发射光谱的位移和谱峰宽度变窄, 这表明通过对金属电极的表面改性和优化可使器件性能超过常规结构的器件.     

铈离子与氨基甲酸酯类化合物引发丙烯酰胺聚合的研究

本文对铈离子与苯基氨基甲酸酯类化合物在H_2O-CH_3CN(3∶1,V/V)及H_2O-HCONH_2(1∶2,V/V)两种介质中引发丙烯酰胺的聚合进行了研究。考察了不同结构的苯基氨基甲酸酯对聚合的影响。苯基氨基甲酸酯类化合物对铈离子引发聚合均有促进作用,其中对-甲苯基氨基甲酸酯的促进作用最为显著。测定了聚合反应表现活化能及聚合动力学方程,并提出了聚合反应机理。     

立规聚甲基丙烯酸热表征研究

本文对不同立构的聚甲基丙烯酸(PMAA)进行了热表征。实验结果表明,在30℃～200℃内未出现玻璃化转变。间同PMAA分别在-245℃和-280℃发生脱水反应和脱羧,而全同PMAA只在-185℃观察到脱水反应。这种热稳定性的明显差别与不同立构PMAA链上相邻羧酸距离有关。实验数据证实PMAA脱水反应为无规反应,服从一级动力学反应方程。脱水温度和间同立构含量成正比,脱水反应活化能间同PMAA比全同PMAA高～7Kcal/mol。     

[Cu(PTA)(Phen)2](p-MBA)(H6O)配合物的合成、晶体结构及电化学分析

The crystal structure of the title complex with the stoichiometric formula [Cu(PTA)(Phen)₂](p-MBA)(H₆O) (Phen=1,10-phenanthroline, PTA=terephthalic acid, p-MBA=p-toluic acid) has been determined by single-crystal X-ray diffraction. The crystal (C₄₈H₄₀CuN₄O₁₀, M_r=896.38) belongs to the monoclinic space group C2/c, with the following crystallographic parameters: a=1.778 6(3) nm, b=1.912 5(3) nm, c=1.389 9(2) nm, β=114.686(2)°, V=4.295 7(12) nm³, D_c=1.386 g·cm^-3, Z=4, μ(Mo Kα)=0.574 mm^-1, F(000)=1 860, final GooF=1.019, R=0.054 0, wR=0.148 3 for 2 644 observed reflections (I>2σ(I)). The crystal structure shows that the copper(Ⅱ) ion is coordinated with two oxygen atoms from one terephthalic acid molecule and four nitrogen atoms from two 1,10-phenanthroline molecules, forming a distorted octahedral coordination geometry. The cyclic voltametric behavior of the complex is also reported. CCDC: 298809.     

[M(en)3] (ndt)•H2O的水热合成、晶体结构和光学性能 ( M=NiⅡ, CoⅡ, MnⅡ and ndt=1,5-naphthalenedithiolate )

水热条件下，合成了三个新的配合物[Ni(en)₃] (ndt) ·H₂O 1, [Co(en)₃] (ndt) ·H₂O 2 和[Mn(en)₃] (ndt) ·H₂O 3。晶体结构通过X-射线单晶衍射进行了表征。三个配合物均属于单斜晶系，Cc空间群。[M(en)₃]²⁺阳离子、ndt阴离子和结晶水分子通过氢键自组装出相同结构的三维网。通过紫外-可见-近红外漫反射光谱对这三个配合物的光吸收性能和能带进行了测定。     

Immobilization of a Monolayer of Bovine Serum Albumin on Gold Nanoparticles for Stereo‐specified Recognition of Dansyl‐norvaline

The assembly strategy to prepare a monolayer of bovine serum albumin on the surface of silica gel supported gold nanoparticles is described. The stereo‐specific recognition ability of this material was evaluated by enantioresolution of Dansyl‐norvaline. For enantiomeric separation, the influences of buffer concentration and the concentration of organic modifier on the separation performance were investigated. A better separation in terms of enantioresolution and peak shape was found with the phosphate concentration at 30 mM. Moreover, the peak shape and resolution can be improved by the addition of methanol solution. Enantioresolution of Dansyl‐norvaline was obtained from this material at optimized conditions. It appears that the immobilization of a monolayer of bovine serum albumin on gold nanoparticles as the chiral selector of Dansyl‐derivative amino acid is promising.     

The Synthesis of Third—order Optical Nonlinear Organic Polyheterocyclic Materials

Synthesis of the third-order nonlinear materials:bis (1,4-dihydroxynaphthalene) tetrathiafulvalene and bis (1,4-dialkoxylnaphthalene) tetrathiafulvalene has been achieved in four steps, starting from 2,3-dichloro-1,4-naphthaquinone. The materials exhibit larger third-order nonlinear optical susceptibilities χ.     

河豚鱼脂肪酸的气相色谱—质谱分析

采用ＧＣ／ＭＳ技术对２种河豚鱼（黄鳍、红鳍）脂肪提取物中的脂肪酸进行定性定量分析，共鉴别出２４种脂肪酸。多不饱和脂肪酸尤其是二十二碳六烯酸（ＤＨＡ）的含量很高，在黄猪中相对含量达３２．３２％，在红鳍中达２４．１１％。检出了在其它海产品中较少发现的１５－二十四烯酸（神经酸），是人体生长发育不可缺少的一种脂肪酸。对鱼肉脂肪提取方法及不同极性毛细管柱分离情况进行了讨论。