Analysis and modeling for time-dependent behavior of polymers exhibited in nanoindentation tests

Through the arrangement of the applied load, experimental nanoindentation results of polymethylmethacrylate (PMMA) and polyurethane (PU) employed to establish a mechanical model. The proposed model consists of irreversible delayed plastic (viscoplastic) deformation, irreversible viscous deformation, and reversible delayed elastic (viscoelastic) deformations. The phase lag exhibited between the responding depth and the oscillating load is found to be linear proportional to frequency in the range of 1-50 Hz. The residual cavity profile of the PMMA scanned by an atomic force microscope gives a validity of accommodation assumption applied in the present model. The effects of overshooting, which occurred in the dwelling process, are also discussed.     

A theory of coupled diffusion and large deformation in polymeric gels

A large quantity of small molecules may migrate into a network of long polymers, causing the network to swell, forming an aggregate known as a polymeric gel. This paper formulates a theory of the coupled mass transport and large deformation. The free energy of the gel results from two molecular processes: stretching the network and mixing the network with the small molecules. Both the small molecules and the long polymers are taken to be incompressible, a constraint that we enforce by using a Lagrange multiplier, which coincides with the osmosis pressure or the swelling stress. The gel can undergo large deformation of two modes. The first mode results from the fast process of local rearrangement of molecules, allowing the gel to change shape but not volume. The second mode results from the slow process of long-range migration of the small molecules, allowing the gel to change both shape and volume. We assume that the local rearrangement is instantaneous, and model the long-range migration by assuming that the small molecules diffuse inside the gel. The theory is illustrated with a layer of a gel constrained in its plane and subject to a weight in the normal direction. We also predict the scaling behavior of a gel under a conical indenter.     

Theoretical Description of the Third Order Parametric Wave Mixing in a Gas-Filled Capillary of Femto-Second Laser Pulse

The theoretical signal-pressure curves are calculated from approximate analytical solutions of the coupledequations describing the third order parametric wave mixing in a gas-filled capillary of femto-second laser pulses. Thecomparison with the corresponding experimental curves suggests that the following three factors exert important influ-ences on the degree of fitting between the theoretical and experimental results: the walk-off, the phase modulation, andthe third order harmonic of idler pulse.     

基于FPGA的42英寸全色PDP存贮控制电路的实现

从等离子体平板显示器(PDP)的发光原理出发，分析和研究了存贮控制电路的工作原理，提出基于FPGA的电路设计方案，并给出数据整理电路和驱动信号产生电路的具体电路框图，最后给出部分仿真波形．     

5-(对羧基苯偶氮)-8-羟基喹啉与钍的显色反应及应用

研究了钍与5-(对羧基苯偶氮)-8-羟基喹啉(5-CPAHQ)的显色反应条件:在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)存在下,pH4.4-5.4缓冲介质中,形成稳定的橙红色络合物,最大吸收波长为490nm,ε=1.10×105L·mol-1·cm-1,钍在0-9μg/25mL范围内符合比尔定律。用TBP萃淋树脂分离,该方法可用于测定矿石中的微量钍。     

生灭过程爆发后的存活时间分布

对于有爆发的寿命为σ的生灭过程X =X(t) ,t<σ ,研究它爆发后还能活多久 .求出了过程爆发后至寿终的存活时间的分布、平均存活时间和爆发就寿终的概率.     

三维随机Ising模型的亚稳态性(Ⅱ)

讨论三维格点环面上随机Ising模型当温度趋向零时的亚稳态性,确定从自旋全为-1的组态到自旋全为+1的组态的最大似然路径和临界组态,并计算出从自旋全为-1的组态出发首次到达自旋全为+1的组态的首达时间的渐近对数估计。证明利用一族带指数扰动的Markov链的大偏差估计。     

Electronic Structure and Magnetic Properties of SmCo7-xZrx

The electronic structure and magnetism of SmCo_7-xZr_x alloy are investigated using the spin-polarized MS-X. method. The results show that a few of electrons are transferred to the Sm(5d⁰) orbital due to orbital hybridization between Sm and Co atoms. The exchange interactions between 3d and 5d electrons are more important than the polarization effects of the conductive electrons, thus it is the main reason resulting in the long-range ferromagnetic order in SmCo_7-xZr_x. The Curie temperature of SmCo_7-xZr_x is generally lower than that of corresponding pure Co, which may be explained by the weaker average coupling strength between Co lattices due to some negative couplings mainly occurring of 2e site. The calculated results for the Sm₅Co₃₂Zr₂ cluster may lead to a better understanding of why SmCo_7-xZr_x is stable phase. Since the spin-up DOS peak of d electrons at E_F arises and the bonding of electrons at E_F strengthens with increasing Zr concentration, which results in the internal energy of the system decrease, the stable ferromagnetic order forms in SmCo_7-xZr_x.     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007