NiO/SnO2-ZrO2催化剂的制备及甲烷燃烧催化性能的研究

利用正交分析，通过溶胶凝胶－超临界干燥及复合浸渍的方法制备了NiO/SnO2-ZrO2催化剂，进行了活性评价，考察了前驱物、NiO、SnO2含量及制备方法对催化剂活性及稳定性的影响，并采用XRD、TEM对催化剂进行了表征分析，结果表明：NiO/SnO2-ZrO2催化剂具有良好的甲烷燃烧催化性能（t100%=640 ℃），其活性、稳定性与制备参数密切相关，其中NiO含量是影响催化剂活性、稳定性的最主要参数，它对催化剂稳定性和活性的影响规律正相反； SnO2组分的添加使ZrO2单斜相稳定，对催化剂起到了良好的稳定化作用，发现当SnO2含量在6 mol％左右时，催化剂具有较好的稳定性；对于制备方法，在凝胶前加入活性组分有利于催化剂的高活性，而在凝胶后加入活性组分，则有利于催化剂保持较好的稳定性；活性组分前驱物对催化剂性能影响不大，采用Ni(NO3)2作为前驱物较为合适。     

Clean Aerobic Liquid Oxidation of Aldehydes with Solid Catalyst

Clean liquid oxidation of aldehydes can be accomplished using solid catalyst in the presence of molecular oxygen at room temperature, which is a valuable alternative to traditional counterparts.     

Synthesis and Crystal Structure of 1,7,7-Trimethyl- 4-（4-methoxyphenyl）-4,6,7,8-tetrahydroquinoline- 2,5（1H,3H）-diones under Microwave Irradiation

1 INTRODUCTION Various quinolone derivatives are known to dis- play interesting biological properties ranging from microbial activity to cytotoxicity[1]. They have been reported as antiviral (HIV-1)[2] and antitumor agents[3] as well as used as tubulin[4], topoisomerase[5] and thrombocyte inhibitors[6]. As a member of the quino- lone family, substituted N-phenyl-2-quinolones re-present the structural basis of many biologically active compounds, such as protein kinase inhibitors, immunodu…     

Molten-salt Synthesis and Properties of ZnS with Hexagonal Prism Morphology

ZnS with hexagonal prism morphology has been synthesized successfully by molten-salt method with ZnS nanoparticles as precursors, and the ZnS nanoparticles were prepared by one-step solid-state reaction of Zn（CH3COO）2·2H2O with Na2S·9H2O at ambient temperature. Crystal structure and morphology of the product were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and HRTEM. Ultraviolet-visible optical absorption spectrum of the ZnS hexagonal prism shows a distinct red shift from that of bulk ZnS crystals and photoluminescence spectrum exhibits strong emissions at 380 and 500 nm, respectively. Further experiments were designed and the formation mechanism of the ZnS hexagonal prism has been also discussed in brief.     

Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

多壁碳纳米管-炭复合泡沫材料的制备和吸附性能

通过在聚氨酯泡沫模板中沉积多壁碳纳米管，用炭的预制体酚醛树酯将碳纳米管粘接固定在一起，经过高温碳化过程制备了碳纳米管-炭复合泡沫材料。红外光谱结果表明利用浓硫酸和浓硝酸的混合溶液处理可以使复合泡沫表面活化形成羧基和羟基，从而使复合泡沫具备较强的分子吸附能力。扫描电镜和氮吸附实验表明这种复合泡沫同时具备大孔和介孔，大孔能够满足流体自由流动的通畅性，介孔可以满足中分子的吸附需要。对标定物维生素B12的吸附实验证明这种复合泡沫对中分子量的生化分子具有有效的吸附能力。这种宏观尺寸的泡沫材料与传统的颗粒状活性炭相比具有简化工艺，提高吸附效率的应用潜力。     

半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜制备与检测

稳定的欧姆接触对半导体器件的正常工作起到至关重要的作用.目前市场上主要采用金/金锗镍合金作为n型GaAs的电极材料,工艺复杂,成本高昂.本文研究了一种新型的、廉价的适用于半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜及其制备过程,以便于读者对半导体器件的制备工艺和流程有所了解.     

化学蒸气发生-电感耦合等离子体原子发射光谱法测定地质样品中痕量金

地质样品经盐酸-硝酸(3+1)混合酸溶解,活性炭分离富集后,于90℃用12g.L-1硼氢化钠溶液(溶于0.5g.L-1氢氧化钠溶液中)作还原剂,用化学蒸气发生-电感耦合等离子体原子发射光谱法测定其中痕量的金。金的质量浓度在1 500μg.L-1以内与其发射强度呈线性关系,方法的检出限(3s)为0.59μg.L-1。方法用于测定2个标准物质(GBW 07289和GBW 07291)中金含量,测定值与认定值相符。     

气相色谱-质谱法检测白酒和黄酒中18种邻苯二甲酸酯类增塑剂

建立了白酒和黄酒中增塑剂的液液萃取法提取,气相色谱-质谱法检测技术,内标法定量。考察了基质效应,萃取方法等主要条件,并最终确定正己烷为提取溶剂的液液萃取技术,并且提取过程中加入NaCl和H2O。在优化的条件下,18种增塑剂均具有较好的线性相关性,线性相关系数均大于0.9978,白酒和黄酒的添加回收率、相对标准偏差分别为75.7%~97.5%、2.3%~6.7%和74.8%~96.0%、1.9%~7.1%;检出限均小于0.05 mg/kg。方法可为酒中增塑剂检测的标准方法的建立提供参考。     

低温燃烧法制备Mn-CeO_x催化剂及其NH_3-SCR脱硝性能

通过低温燃烧法(LCS)制备了不同金属硝酸盐与柠檬酸物质的量比的系列Mn-CeO_x(LCS)锰铈催化剂,将其与共沉淀法(CP)制备的Mn-CeO_x(CP)锰铈催化剂相对比,结合XRD、XPS、FESEM和H2-TPR等技术表征,对其NH_3-SCR脱硝催化性能进行了研究。结果表明,金属硝酸盐与柠檬酸的物质的量比是影响Mn-CeO_x(LCS)催化剂脱硝性能的重要因素。虽然两种催化剂中的锰氧化物组分均为无定型,但相较于Mn-CeO_x(CP),Mn-CeO_x(LCS)表面具有较高的锰含量与Oα/(Oα+Oβ)比,其脱硝催化性能也较高;同时,Mn-CeO_x(LCS)锰铈催化剂上有更多的多级孔,有利于气体在催化剂上的吸附和反应。硝酸盐与柠檬酸物质的量比为36∶22的Mn-CeO_x(LCS)锰铈催化剂在80-180℃下脱硝率可达75%-100%;即使通入SO2,180℃下的脱硝率仍可稳定于74%。