Porphyrins with exocyclic rings. 14. Synthesis of tetraacenaphthoporphyrins, a new family of highly conjugated porphyrins with record-breaking long-wavelength electronic absorptions

The Soret band for porphyrins is usually observed in the near-ultraviolet at approximately 400 nm, and few examples of "nonexpanded" porphyrins with this major absorption band at values above 500 nm have previously been reported in the literature. Ring fusion with aromatic ring systems such as naphthalene, anthracene, or phenanthrene generally only produces minor bathochromic shifts to this diagnostic absorption band. In this paper, the synthesis of a series of tetraacenaphthoporphyrins and their metal chelates is reported. The compact nature of the acenaphthylene ring system allows the introduction of meso substituents using the Lindsey methodology. meso-Tetraphenylporphyrin 10a shows the presence of a Soret band at 556 nm, while p-methoxy and p-nitro substituents in 10f and 10g, respectively, further shift this band to 560 and 570 nm. Addition of TFA produces the corresponding dications with slightly higher wavelength Soret bands at 565, 573, and 588 nm. These values compare to 525 nm for the dication of tetraacenaphthylene 8, which lacks the meso-aryl substituents, indicating that steric crowding and its resulting distortion of the macrocyclic conformation is responsible for a significant albeit minor portion of these shifts. The nickel(II), copper(II), and zinc chelates of 10a produce Soret bands at 528, 545, and 558 nm, respectively, demonstrating that the trend for increasing red shifts in metalloporphyrins across the periodic table is retained for this series. The lead(II) chelate 19d gave an additional "hyper" shift that brought the Soret band to 604 nm. A similar red shift could be achieved by introducing four phenylethynyl substituents at the meso positions, and this highly conjugated porphyrin (20) also showed a Soret band at 604 nm, while the corresponding dication afforded this absorption band at 629 nm. The essentially additive "hyper" shift due to lead chelation brought the Soret band for the related lead(II) complex 22d to 642 nm. These effects are by far the largest ever observed for true porphyrins and demonstrate that the Soret band can be fined tuned to virtually any part of the visible spectrum.     

Automated carbohydrate synthesis to drive chemical glycomics

This feature article describes the development of the first automated solid-phase oligosaccharide synthesizer. A series of chemical challenges had to be addressed to accomplish this breakthrough and provide rapid access to oligosaccharides of biological significance. Accelerated synthesis of glycoconjugates promises to greatly impact the emerging field of glycobiology. Chemical glycomics uses synthetic carbohydrates and analogs to study their role in recognition, signal transduction pathways and other events of fundamental biomedical significance and shapes up to become the next major wave in biomedical research. The automated synthesis of a novel malaria vaccine candidate is discussed to illustrate the medical potential of chemical glycomics.     

Bayesian analysis and inference from QSAR predictive model results

QSAR models have been under development for decades but acceptance and utilization of model results have been slow, in part, because there is no widely accepted metric for assessing their reliability. We reapply a method commonly used in quantitative epidemiology and medical decision-making for evaluating the results of screening tests to assess reliability of a QSAR model. It quantifies the accuracy (expressed as sensitivity and specificity) of QSAR models as conditional probabilities of correct and incorrect classification of chemical characteristic, given a true characteristic. Using Bayes formula, these conditional probabilities are combined with prior information to generate a posterior distribution to determine the probability a specific chemical has a particular characteristic, given a model prediction. As an example, we apply this approach to evaluate the predictive reliability of a CATABOL model and base on it a "ready" and "not ready" biodegradability classification. Finally, we show how predictive capability of the model can be improved by sequential use of two models, the first one with high sensitivity and the second with high specificity.     

A mathematical evaluation of dose-dependent PpIX fluorescence kinetics in vivo

The in vivo pharmacokinetics of protoporphyrin IX (PpIX) after administration of 5-aminolevulinic acid (ALA) cannot be described accurately by mathematical models using first-order rate processes. We have replaced first-order reaction rates by dose-dependent (Michaelis-Menten [MM]) reaction rates in a mathematical compartment model. Different combinations of first-order and dose-dependent reaction rates were evaluated to see which one would improve the goodness-of-fit to experimentally determined in vivo PpIX fluorescence kinetics as a function of concentration. The mathematical models that were evaluated are all based on a three-compartment model for drug distribution, conversion to PpIX and subsequent conversion to heme. Implementation of dose-dependent reaction rates improved the goodness-of-fit and enabled interpolation to other drug doses. For most data sets the time constant for delivery to the target cells turned out to be dose dependent. For all data sets the use of MM rates for the conversion of ALA to PpIX yielded better fits. The clearance of PpIX turned out to be a first-order process for all doses and types of administration. Fluorescence curves measured on a specific tissue type but obtained in different studies with different measurement techniques could be described with a single set of parameters.     

Benzolactams. 4. Reaction of 3',4'- or 4',5'-dialkoxy-substituted 1-(2'-Bromobenzyl)-2-ethoxycarbonyl-1,2,3,4-tetrahydroisoquinolines with alkyllithium. 1,2 and 1,4 additions of alkyllithium to benzolactams

Treatment of 1-(2'-bromo-3',4'-dialkoxybenzyl)-1,2,3, 4-tetrahydroisoquinoline carbamates, 1a,c, with excess alkyllithium gave 8-oxoberbines, 2a,c, which were successively attacked in situ with another molecule of alkyllithium to give 1,2 and/or 1,4 addition products. A primary alkyllithium, such as MeLi or BuLi, gave a 1,2 addition product, 8-methyleneberbine 9a or 8-butylideneberbine 3a. t-BuLi preferred 1,4 addition, followed by elimination of the alkoxy group, to give 9-tert-butyl-8-oxoberbine 6a or 7c. s-BuLi gave a mixture of 1,2 and 1,4 addition products, 1-[2'-(2' '-methylbutyryl)benzyl]-1,2,3,4-tetrahydroisoquinoline 4a and 9-s-butyl-8-oxoberbine 5a. Similar treatments of carbamate 1b having no alkoxy group at its 3' position gave 1,2 addition products, 8-butylideneberbine 3b, 1-[2'-(2' '-methylbutyryl)benzyl]-1,2,3, 4-tetrahydroisoquinoline 4b, and 1-(2'-pivaloylbenzyl)-1,2,3, 4-tetrahydroisoquinoline 6b, in all cases. Reactions of 1a with s-BuMgCl and isoPrMgCl also gave the 1,4 adduct, 5a, and its 9-isoPr analogue, 12a. Treatment of 9a with excess NaBH(4) in AcOH gave (+/-)-coralydine (10b).     

Coordination Complexes of Some Group(IV) Halides with Monodentate Schiff Bases

Coordination compounds resulting from the interaction of N-(phenyl)benzalaldimine and its derivatives containing a methyl group in different positions of the aniline ring and group(IV) halides, MX₄ (where M = Si or Sn and X = Cl or Br), have been prepared and characterized by elemental analyses and electronic, infrared and Raman spectra.     

Infrared spectroscopic study of the structure of the tetrabutyl S-dithiopyrophosphate complex of silver

The structure of the complex Ag·TBDTPP (tetrabutyl S-dithiopyrophosphate) formed in HNO₃ medium was studied by IR and NMR methods. The complex is involved in the isomerization of TBDTPP in the presence of Ag⁺ and NO ₃ ⁻ ions. In the IR spectra, we observe the disappearance of P−O−P band and the occurrence of new absorption bands associated with P−S−P and P=O bonds. The silver ion is coordinated to the thiophosphoryl group of the isomer molecule. The influence of HNO₃ concentration on complex formation is discussed.     

The stability of silver iodide sols in the presence of polyacrylic acids of various molecular weights

Summary The effect of a series of polyacrylic acids, ranging in molecular weight from 1.67×10⁴ to 2.36×10⁶, on the stability of positively charged silver iodide particles has been examined. Flocculation of the sol occurred at a well defined concentration of polyacrylic acid,c _f , and a further increase in concentration of the polyelectrolyte caused restabilization of the sol. Over the range examinedc _f appeared to be related to the viscosity average molecular weight of the acid,M _v , by an equation of the form,c _f =a ·M _v ^{– b} wherea andb are constants.     

Action of photoreactivating light on pyrimidine heteroadduct in bacteria

Abstract— In stationary-phase Escherichia coli B/r, photoreactivation (PR) at 313 nm of ultraviolet (u.v.) killing is inefficient compared with PR at 405 nm, and can be explained solely by photoenzymatic reversal of pyrimidine dimers. In Staphylococcus epidermidis, PR shows a maximum at 313 nm, suggesting that this organism shows the Type III PR proposed by Jagger et al.[5] for Streptomyces strains. Reversal of pyrimidine dimers is not sufficient to explain this PR. The mechanism of Type III PR remains unknown. With both S. epidermidis and E. coli B/r, the amount of uracil–thymine heteroadduct in DNA hydrolysates decreases if the cells are given a post-u.v. treatment at 313 nm, but no decrease is observed if the post-u.v. treatment is at 405 nm. The biological significance of this adduct and of its removal is not clear. It may play a role in Type III PR.     

Direkte fluorimetrische Bestimmung von 3,4-Benzpyren im w?\rigen Medium

Zusammenfassung Es wurde eine direkte Bestimmung des 3,4-Benzpyrens in wä\riger Lösung beschrieben, die auf der Löslichkeitserhöhung beruht, die das in Wasser schwer lösliche 3,4-Benzpyren durch Coffein erfährt. Es können so noch 4 ng/ml bei der angegebenen Standardisierung bestimmt werden. Bei der Direktbestimmung des 3,4-Benzpyrens im System Coffein-Wasser ist ein p_H >6,0 einzuhalten, da bei höheren Wasserstoffionenkonzentrationen die Fluorescenzintensität stark abnimmt.

---

Direct fluorimetric determination of benzo(a)pyrene in aqueous medium

A method for the direct determination of benzo(a)pyrene in aqueous solution is based on the increase of its solubility by coffeine. 4 ng of benzo(a)pyrene/ml can be determined by the procedure described. In this direct determination in the system coffeine-water the p_H has to be adjusted to >6.0, as the fluorescence intensity considerably decreases with higher H⁺ concentrations.

---

---

Eine ausführliche Darstellung findet sich in der Dissertation von G. Becker, Univ. Karlsruhe 1968.

---

Die Messungen zu dieser Arbeit -wurden an dem Chemischen Untersuchungsamt für das Saarland, Saarbrücken, mit einem Spektralphotometer der Deutschen Forschungsgemeinschaft ausgeführt. Beiden Institutionen sind wir zu Dank verpflichtet.