Über die Wahl der Lösungsmittelsysteme bei der papierchromatographischen Trennung organischer Verbindungen

Zusammenfassung An praktischen Beispielen wurde gezeigt, in welcher Weise die Trennung organischer Verbindungen mittels Papierchromatographie erzielt werden kann. Man ist nicht auf einige bewährte Lösungsmittel systeme allein angewiesen, sondern kann von Fall zu Fall systematisch neue und geeignete Systeme benützen. Es hat sich bewährt, sich nach den elementaren Löslichkeitsregeln für organische Stoffe zu richten, unter der Voraussetzung, daß die zu chromatographierende Verbindung in der stationären Phase gut, in der mobilen Phase dagegen weniger löslich ist. Durch Änderung der stationären Phase (Wasser, nicht wäßriges, polares Lösungsmittel, nicht polares Lösungsmittel) oder der Polarität und Zusammensetzung der mobilen Phase kann man das Wandern der Flecke am Chromatogramm beeinflussen, beliebige R_fWerte erhalten und in vielen Fällen auch eine beliebige Reihenfolge der Verbindungen am Chromatogramm erzielen.Da die Löslichkeit organischer Verbindungen von intermolekularen Kräften abhängig ist, erscheint das Problem im Zusammenhang mit strukturellen Einflüssen sehr kompliziert und muß für jeden Fall auf eigene Weise gelöst werden. Die Löslichkeitseigenschaften können weiter durch Benutzung reaktiver Lösungsmittel beeinflußt werden, die z. B. die Verbindungen in wasserlösliche Salze überführen können. Dabei ist an die möglichen Komplikationen, die bei ionisierbaren Verbindungen durch Dissoziation und Hydrolyse entstehen können, zu achten.Von den Hauptfaktoren, die eine Trennung ermöglichen können, seien die folgenden erwähnt: funktionelle Gruppen, ihre Anzahl, Polarität, gegenseitige Stellung, bzw. ihre Basizität oder Azidität, C-Atomanzahl in homologen Verbindungen, inter- und intramolekulare Wasserstoffbindungen, sterische Faktoren u. a. Es ist dann von der Art des gewählten Lösungsmittelsystems abhängig, welche der genannten Faktoren im Vordergrund stehen und welche beseitigt werden.Wenn die Löslichkeitsunterschiede der zu trennenden Stoffe zu gering sind, um gute Trennungen zu ermöglichen, ist es zweckmäßig, die Verbindungen in solche Derivate zu überführen, deren Strukturunterschiede größer sind.

---

Summary Practical examples are given to show how organic compounds can be separated by means of paper chromatography. The operator is not limited to tested solvent systems, but can use new suitable systems as the occasion demands. It has been found best to abide by the elementary rules of solubility of organic compounds, provided the compound to be chromatographed is quite soluble in the stationary phase but less soluble in the mobile phase. By altering the stationary phase (water, nonaqueous, polar solvent, non-polar solvent) or the polarity and composition of the mobile phase, the migration of the stains in the chromatogram can be influenced, selectedR _f -values can be obtained, and in many cases it is also possible to secure a desired succession of the compounds on the chromatogram.Since the solubility of organic compounds depends on intermolecular forces, the problem in connection with structural influences appears very complicated and must be solved individually for each case. Moreover, the solubility characteristics can be affected by using reactive solvents; for instance, the compounds can be converted into water soluble salts. Under such circumstances, sight must not be lost of the complications which may arise because of the dissociation and hydrolysis of ionizable compounds. The following are among the chief factors, which may make a separation possible: functional groups, their number, polarity, relative position, their basicity or acidity, C-atom number in homologous compounds, inter- and intramolecular hydrogen bonds, steric factors, etc. It then depends on the type of solvent system selected, which of these factors are predominant and which can be neglected or eliminated.If the solubility differences are too slight to permit good separations, the compounds to be separated should, if possible, be converted into derivatives whose structural differences are more pronounced.

---

Résumé Des exemples pratiques montrent comment il est possible d'effectuer la séparation de combinaisons organiques par Chromatographie sur papier. Il n'est pas uniquement fait appel à des systèmes de solvants éprouvés mais, dans certains cas, de nouveaux systèmes appropriés sont systématiquement utilisés.Il s'est avéré satisfaisant de faire appel aux règles élémentaires de solubilité des substances organiques sous réserve que la combinaison à chromatographier soit suffisamment soluble dans la phase stationnaire et moins soluble dans la phase mobile. En faisant varier la phase stationnaire (eau, solvant non aqueux, solvant polaire, solvant non polaire) ou la polarité et la composition de la phase mobile, il est possible d'influencer la migration des taches du chromatogramme, d'obtenir des valeurs deR _f désirées et, dans de nombreux cas, d'obtenir les combinaisons dans un ordre déterminé sur le chromatogramme.La solubilité des combinaisons organiques étant fonction des forces intermoléculaires il en résulte que le problème se complique considérablement dans la mesure où l'on considère les influences structurelles et que chaque cas particulier doit recevoir une solution qui lui est propre. Les propriétés de solubilité peuvent en outre être influencées par l'emploi de solvants réactifs qui peuvent transformer, par exemple les combinaisons en sels solubles dans l'eau. Il faut alors tenir compte des possibilités de complications qui peuvent apparaître par dissociation et hydrolyse des combinaisons ionisables.Parmi les principaux facteurs qui permettent une séparation, il convient de mentionner les suivants: les groupes fonctionnels, leur nombre, leur polarité, leur position relative, ou encore leur acidité ou leur basicité, le nombre d'atomes de carbone de combinaisons homologues, les liaisons hydrogène inter- et intramoléculaires, les facteurs stériques, etc. Suivant la nature du système solvant choisi pourront alors varier les facteurs dont l'effet est prépondérant et ceux dont l'effet est nul. Lorsque les différences de solubilité des substances à séparer sont trop faibles pour permettre des séparations satisfaisantes, il est commode de transformer les combinaisons en dérivés dont les différences de structure soient plus importantes.

     

THE NON-RADIATIVE DISSIPATION OF EXCITATION ENERGY IN SOLID CINNAMIC ACID BY DIMER FORMATION

Abstract— The quantum efficiency for the photodimerization of trans -cinnamic acid in the solid state is independent of intensity and is found to have a value approaching two. Thus, the reaction involves one excited and one un-excited molecule.
During the exposure, a dimer film developing on the surface of the cinnamic acid layer attenuates the intensity of the radiation incident on the unreacted cinnamic acid. This gives the appearance of a decrease in the quantum yield with increasing number of photons incident.     

Über den Nachweis und die Bestimmung des Schädlingsbekämpfungsmittels E 605 in der gerichtlichen Chemie

Zusammenfassung Es wird gezeigt, daß sich Insektizide auf der Basis der Ester der Thiophosphorsäure (E 605) aus biologischem Material mittels Wasser-dampfdestillation auf verhältnismäßig einfache Weise abscheiden lassen. Im Destillat erfolgt die Bestimmung nach Ausäthern und Lösen des Rückstandes in Äthanol durch Messen der Lichtabsorption im UV. Hierbei zeigt sich, daß die rechnerische Eliminierung der Störstoffe bei geringeren Konzentrationen der Ester leichter ist als bei hohen.Durch Messung der Lichtabsorption im IR läßt sich, genügende Konzentration vorausgesetzt, entscheiden, welcher Ester vorliegt.

---

Summary It was shown that insecticides based on the ester of thiophosphoric acid (E 605) can be separated in relatively simple fashion from biological material by means of steam distillation. The distillate is shaken out with ether and the residue dissolved in ethanol and the determination is accomplished by measuring the absorption in ultraviolet light. It was found that the computational elimination of the interfering materials is easier at lower concentrations of the ester than when higher concentrations are present. By measuring the light absorption in infrared, it is possible to decide which ester is present, provided the concentration is high enough.

---

Résumé On montre que les insecticides se séparent d'une manière relativement simple de l'élément biologique par un entraînement à la vapeur d'eau sur la base de l'ester de l'acide thiophosphorique (E 605). Le dosage s'effectue sur le distillat d'après l'épuisement à l'éther et la solubilité du résidu dans l'éthanol et la mesure de l'absorption lumineuse dans l'ultraviolet. On en déduit que l'élimination calculée de la substance gênante est plus facile pour les faibles concentrations de l'ester que pour les grandes. En mesurant l'absorption de la lumière dans l'infrarouge, on peut savoir de quel ester il s'agit pour des concentrations supposées suffisantes.

     

Synthesis and characterization of poly-β-hydroxybutyrate. II. Synthesis of D-poly-β-hydroxybutyrate and the mechanism of ring-opening polymerization of β-butyrolactone

Synthesis of the naturally occurring polyester, D -poly-β-hydroxybutyrate (PHB) was accomplished by using an optically active monomer. Polymerization of D -(+)-β-butyrolactone (β-BL) of 73% optical purity with a catalyst system of Et₃Al–H₂O produced a polymer with a similar optical activity and essentially identical to the natural polymer as isolated from bacterial cells. This paper describes the synthesis and characterization of this optically active polyester along with a suggested mechanism to account for the observed stereospecific polymerization of β-BL with this catalyst system.     

The Effects of Beating,Web Forming and Sizing on the Surface Energy of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> Kraft Fibres Evaluated by Inverse Gas Chromatography

In this work attention has been focused on the effects of papermaking beating, web forming and sizing operations on the physical/chemical surface properties of bleached Eucalyptus globulus kraft fibres. Inverse gas chromatography (IGC) was used to determine the dispersive component of surface tension (γ_s^d) as well as the acidic/basic character (according to the Lewis concept) of the solid surfaces (pulp fibres and pulp handsheets). The results have shown that the main effect of beating is to increase the fibre's Lewis acidic character. Web forming caused a strong decrease in γ_s^d and significant increments in the adhesion works of both acidic and basic probes, lowering the ratio between the two. Nevertheless, the surface of handsheets still exhibited a dominant acidic character. The sizing operation did not change the dispersive component of the surface tension significantly but decreased the difference between the adhesion works of the acidic and basic probes, rendering the handsheet surface less Lewis acidic and more Lewis basic. Thus, although internal sizing is expected to strongly influence liquid spreading at the paper surface and liquid penetration of the fibre's network, it is concluded that beating and web forming lead to important changes in the surface energetic properties of the Eucalyptus globulus kraft fibres.     

Séparation de traces de fluorure des sels d'aluminium(III) par échangeurs d'ions

A method is proposed for the separation of aluminium(III) fluoride by chromatographie by means of an anion exchanger in alkaline medium, The methode is applicable to a minimum of 100 p.p.m. of fluoride in the aluminium.     

Carbon-13 spin-lattice relaxation studies of the effect of water on ion-selective electrode membranes

(13)C spin-lattice relaxation studies on bis(2-ethylhexyl) adipate (DOA) plasticized poly(vinylchloride) (PVC) membranes are reported for plasticization levels ranging from 25 to 100 wt% plasticizer. The interaction between DOA and PVC molecules in these membranes appears to involve an entrapment of the plasticizer molecule within the polymer matrix. This is based on the constancy of the characteristic segmental motions of the plasticizer chains throughout the concentration range studied. The segmental mobility of the plasticizer component is modified by water absorption in the membrane. The pattern of characteristic segmental motions of the plasticizer is altered, the effect depending on the amount of added salt in the membrane. The results show water has a weak influence on the microviscosity of the membrane matrix.     

Kinetic study of the metalation of a polystyrene model compound by the secondary butyllithium-N,N,N′,N′-tetramethylethylene diamine complex

2.5-Diphenyl hexane, a model compound of polystyrene was metalated by a complex of secondary butyllithium and N,N,N′,N′-tetramethylethylene diamine in heptane. At various times, the lithiated dimer was quenched with deuterated methanol. The deuterated compound was examined by mass spectrometry and from the deuterium content, the degree of lithiation was determined. The effects of the concentration of styrene units, secondary butyllithium and diamine on the lithiation were studied at 20 C and ?20 C. The overall rate of metalation was first order with respect to the styrene units concentration and half-order with respect to sec. butylithium-TMEDA complex concentration. The kinetic results were explained by the presence at 20 C of the 1 4 complex (1 sec. BuLi 4 TMEDA) and at ?20 C of the 1–2 complex (1 sec. BuLi 2 TMEDA).     

High-performance size-exclusion chromatographic determination of the potency of biosynthetic human growth hormone products

A new high-performance size-exclusion chromatography method has been developed for the determination of potency of human growth hormone products. This method has been extensively validated and shown to correlate well with the hypophysectomized rat bioassay which has been used traditionally. The method is much more precise than the traditional bioassay and thus provides more reliable means of producing consistent biosynthetic human growth hormone batches.     

Studies on poly(iminomethylenes)

A variety of simple alkyl and aryl isocyanides have been polymerized using 0.5% NiCl₂ in ethanol as a catalyst. The resulting poly(iminomethylenes) have been characterized by carbon-13 NMR spectroscopy and their polystyrene-equivalent molecular weights have been determined by gel permeation chromatography. Straight chain aliphatic isocyanides having from three to ten carbon atoms in the chain form readily solyble polymers having molecular weights (M_w) in the general range 10,000 to 30,000. Neopentyl isocyanide unlike tert-butyl isocyanide forms an insoluble polymer. A number of new soluble aryl isocyanide polymers have been obtained. However, aryl isocyanides having a single alkyl substituent (CH₃, C₂H₅, CF₃) in the ortho position give only insoluble polymers, whereas aryl isocyanides having alkyl substituents in both ortho positions (e.g., 2,6-(CH₃)₂C₆H₃NC and 2,4,6-(CH₃)₃C₆H₂NC) fail to polymerize under these conditions. The highest molecular weight soluble aryl isocyanide homopolymer is obtained from 3-CH₃OC₆H₄NC(M_w = 26,000). The trimethylsilyl substituted isocyanide (CH₃)₃SiCH₂CH₂NC has been obtained from LiCH₂NC and (CH₃)SiCH₂Cl and gives a brown soluble homopolymer with a molecular weight (M_w) of 19,000.