The effect of gamma irradiation and shelf aging in air on the oxidation of ultra-high molecular weight polyethylene

This study has investigated the effect of shelf aging, for up to one year in air, on the properties of gamma-irradiated ultra-high molecular weight polyethylene (UHMWPE). A variety of techniques were used to characterize the properties of treated samples. Differential scanning calorimetery (DSC) was used to characterize the morphology. The extent of cross-linking in a polymer network was detected by swelling measurements. The durometer hardness test was used to measure the relative hardness of this material, and changes in density were also measured. Results from all these measurements were combined to explain the changes in the microstructure of the aged, irradiated UHMWPE. This study shows that crystallinity is increased with radiation dose and with aging due to chain scission, which leads to a reduction in the molecular weight of the material. This allows the chains to rearrange to form crystalline regions. Positron annihilation lifetime spectroscopy confirms these conclusions. Fractional free volumes have been deduced from lifetime parameters, which correlate with the data obtained by the other techniques.     

Influence of octupole interactions on the behavior of negative-parity states at low spins

The energies of negative-parity levels based on two-particle states exhibit a nonlinear behavior at low spins versus the core-rotation energy because the alignment process has not yet been completed for them. This behavior of negative-parity levels in the low-spin region is satisfactorily described upon the inclusion of octupole-octupole interactions. This is demonstrated within the rotational model involving the Coriolis mixing of states for the even-even isotopes ^162–168Hf.     

Propagation of a focused light beam in a circuital system of tunnel-coupled waveguides

The propagation of a pencil beam in a circuital system of tunnel-coupled waveguides is considered. It is shown that the beam periodically focuses into a point when moving along the trajectory. A maximal number of waveguides supporting the propagation of the beam can be estimated in simple terms. The cross-sectional area of the waveguides can be subdivided into three zone with the beam pulsing only in the central one.     

Electricity price forecasting through transfer function models

Forecasting electricity prices in presentday competitive electricity markets is a must for both producers and consumers because both need price estimates to develop their respective market bidding strategies. This paper proposes a transfer function model to predict electricity prices based on both past electricity prices and demands, and discuss the rationale to build it. The importance of electricity demand information is assessed. Appropriate metrics to appraise prediction quality are identified and used. Realistic and extensive simulations based on data from the PJM Interconnection for year 2003 are conducted. The proposed model is compared with naïve and other techniques.     

Optical properties of Fe-doped silica films on Si

Optical properties of Fe-doped silica films on Si were investigated by ellipsometric technique in the region 1-5 eV. Samples were produced by sol-gel method. Precursors were prepared by mixing tetraethoxysilane (TEOS) solution in ethanol and water with aqueous solution of Fe-chloride or Fe-acetate. The coating solution was deposited on Si substrates by spin on technique. The size of Fe-containing nanometric-sized particles depended on technology and varied from 20 to 100 nm. Optical response of complex hybrid samples SiO₂:Fe/Si was interpreted in a multi-layer model. In the inverse problem, the Maxwell equations were solved by transfer matrix technique. Dielectric function of Fe-doped silica layers was calculated in the model of effective media. Analysis of optical data has shown that various Fe-oxides formed. Experimental data for films obtained from precursors with Fe-acetate and annealed in hydrogen were well described by the model calculations taking into account a small contribution 1-5% of metal Fe imbedded in silica. The Fe/Fe-O contribution to optical response increased for samples grown from FeCl₃-precursor. Ellipsometric data for Fe-doped silica films on Si were interpreted taking into account the structural AFM studies as well as the results of magnetic measurements.     

Effect of oxygen exposure on the magnetic properties of ultrathin Co/Ge(1 1 1) films

Influences of oxygen exposure on the magnetic properties of Co/Ge(1 1 1) ultrathin films have been investigated by surface magneto-optic Kerr effect technique. As the oxygen exposure increases on Co/Ge(1 1 1) films, their magnetic properties could be modified. As an example for 15 ML Co/Ge(1 1 1) films, the coercivity increases from 730 to 920 Oe and the remanence Kerr intensity is reduced for 500 Langmuir (L) of oxygen exposure. Corresponding compositions analyzed by Auger electron spectroscopy measurement shows that the amount of oxygen on the surface layers increases with increasing the oxygen exposure time. Oxygen distributes on the topmost layers of the film. The adsorbed oxygen influences the electronic density of states of Co and results in the changes of the magnetic properties. Besides, the appearance of O/Co/Ge interface could modify the stress anisotropy, and as a result the coercivity of ultrathin Co/Ge(1 1 1) film is enhanced.     

Fatty acid binding site of mitochondrial uncoupling protein UCP2 as probed by EPR spectroscopy of spin-labeled fatty acids

Electron paramagnetic resonance (EPR) spectroscopy of spin-labeled fatty acids was used to investigate their interaction withEscherichia coli-expressed human mitochondrial uncoupling protein UCP2 refolded from inclusion bodies in nonaethylene glycol monododecyl ether (C₁₂E₉) micelles. 5-DOXYL-stearic acid and 4-PROXYL-palmitic acid bound to UCP2 exhibited additional clearly separated h_+1I, h_?1I “immobile” peaks in the low- and high-field region, respectively, separated by 42 and 44 Gauss, and extensively reduced h_+1M, h_?1M “mobile” peaks, separated by about 30 G, whereas with 7-DOXYL-stearic acid the I and M peaks were smoothed together into one wide peak. Competition of 4-PROXYL-palmitic acid with added palmitic acid, arachidonic acid, and all-cis-8,11,14-eicosatrienoic acid and of 7-DOXYL-stearic acid with arachidonic acid was indicated by the disappearance of the h_+1I, h_?1I “immobile” peaks, whereas redistribution in micelles without protein was indicated by the rising of the h_+1M, h_?1M “mobile” peaks. In conclusion, a competition of palmitic, arachidonic, and eicosatrienoic acid within a putative fatty acid binding site was observed for mitochondrial uncoupling protein UCP2. This finding together with the observation of EPR spectra of highly immobilized probes exclusively in the presence of the recombinant UCP2 suggest the existence of a fatty acid binding site on UCP2 which is a prerequisite of the fatty acid cycling mechanism as previously postulated for UCP1.     

Determination of platinum and biologically important trace elements in structure-activity relationship studies on platinum-containing anti-cancer drugs. Special procedures for removing32P as well as for the estimation of99 Mo and199Au

As part of an examination of the cytostatic effects of 1,2-diarylethylenediamine-platinum(II)-complexes the contents of platinum and biologically essential trace elements of tumour tissue and different organs were determined. The activation analysis procedure — separation of³²P, isolation of¹⁹⁹Au and⁹⁹Mo — is described. In the course of a pharmakokinetical experiment with tumourbearing rats (DMBA induced hormone-dependent tumours) the desired enrichment of the administered drug in the tumour tissue was found. Changes of the trace element level of tumour tissue were found for hormone-dependent MXT-mammary tumours on mice.     

Rolling of a non-homogeneous ball over a sphere without slipping and twisting

Consider the problem of rolling a dynamically asymmetric balanced ball (the Chaplygin ball) over a sphere. Suppose that the contact point has zero velocity and the projection of the angular velocity to the normal vector of the sphere equals zero. This model of rolling differs from the classical one. It can be realized, in some approximation, if the ball is rubber coated and the sphere is absolutely rough. Recently, J. Koiller and K. Ehlers pointed out the measure and the Hamiltonian structure for this problem. Using this structure we construct an isomorphism between this problem and the problem of the motion of a point on a sphere in some potential field. The integrable cases are found.      

Titanium nanocarbides: Synthesis and modeling

The present state of research on the production and modeling of nanostructures based on titanium carbide-a typical representative of an extensive class of carbides of d-and f-metals-is reviewed. Methods for the synthesis of various Ti-C nanostructures (molecular clusters, nanocrystallites, nanospheres, nanofibers, nanowires) are examined, and their morphology, atomic structure, and known physicochemical characteristics are described. Theoretical models of the atomic structure and properties of new types of nanostructures in the titanium-carbon system (endo-and exohedral titanofullerenes, “hybrid” structures based on carbon nanotubes, the so-called peapods, nanocables, and a number of others) and the prospects for their application as components of nanoceramics, hydrogen accumulators, materials for spintronics, etc. are discussed. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 1–23, January–February, 2007.