Damped precession of the magnetization vector of superparamagnetic nanoparticles excited by femtosecond optical pulses

The ultrafast magnetization and electron dynamics of superparamagnetic cobalt nanoparticles, embedded in a dielectric matrix, have been investigated using femtosecond optical pulses. Our experimental approach allows us to bypass the superparamagnetic thermal fluctuations and to observe the trajectory of the magnetization vector which exhibits a strongly damped precession motion. The magnetization precession is damped faster in the superparamagnetic particles than in cobalt films or when the particle size decreases, suggesting that the damping is enhanced at the metal dielectric interface. Our observations question the gyroscopic nature of the magnetization pathway when superparamagnetic fluctuations take place as we discuss in the context of Brown's model.     

Influence of the Si cap layer on the SiGe islands morphology

Transmission electron microscopy (TEM), atomic force microscopy (AFM), and EDX methods were used to study morphology and chemical composition of SiGe/Si(001) islands grown at 700 degrees C and covered at 550 degrees C and 700 degrees C by Si layers of different thickness. The samples were grown in ultra high vacuum chemical vapor deposition process (UHVCVD) controlled with in situ reflection of high-energy electron diffraction (RHEED). The islands transformed from initial pyramid and dome shapes to lens shape for 1.4 nm and 3.7 nm cap layer thickness at 550 degrees C and 700 degrees C, respectively. An increase of lateral to vertical ratio was observed during the transformation. For the higher depositing temperature the ratio was bigger and was increasing continuously with cap layer thickness. Also, with increasing Si cap layer thickness, the Ge concentration was decreasing, which was more observable for higher capping temperature.     

Crystal structure and vibrational spectrum of the NaCaMg2F7 pyrochlore

The crystalline structure of NaCaMg₂F₇ was determined using single crystal X-ray diffraction. This compound crystallizes in the cubic pyrochlore structure, i.e., space group , lattice parameter: and Z=8. All atoms occupy special crystalline sites, but Na and Ca are randomly distributed in the anti-cristobalite sub-lattice of the pyrochlore structure. The vibrational spectrum was determined by polarized Raman scattering and infrared reflectance. The number of observed Raman and infrared active phonons is larger than that predicted by the factor group analysis of the pyrochlore structure. The anomalous vibrational spectrum is discussed in terms of a disorder-induced symmetry lowering mechanism.     

Influence of ultrasound power and frequency upon corrosion kinetics of zinc in saline media

This paper is devoted to zinc corrosion and oxidation mechanism in an ultrasonically stirred aerated sodium sulfate electrolyte. It follows a previous study devoted to the influence of 20 kHz ultrasound upon zinc corrosion in NaOH electrolytes [Ultrason. Sonochemis. 8 (2001) 291]. In the present work, various ultrasound regimes were applied by changing the transmitted power and the wave frequency (20 and 40 kHz). Unlike NaOH electrolyte which turns the zinc electrode into a passive state, Na₂SO₄ saline media induces soft corrosion conditions. This allows a study of the combined effects of ultrasonically modified hydrodynamic and mechanical damage (cavitation) upon the zinc corrosion process. A series of initial experiments were carried out so as to determine the transmitted power and to characterize mass transfer distribution in the electrochemical cell. Zinc corrosion and oxidation process were subsequently studied with respect to the vibrating parameters. When exposed to a 20 kHz ultrasonic field, and provided that the electrode is situated at a maximum mass transfer point, the corrosion rate reaches values six to eight times greater than in silent conditions. The zinc oxidation reaction, in the absence of competitive reduction reactions, is also activated by ultrasound (20 and 40 kHz) but probably through a different process of surface activation.     

A novel angular geometry for the sonochemical silver recovery process at cylinder electrodes

In order to obtain maximum ultrasonic effect upon electrochemical silver recovery, mass transfer measurements were investigated. The effect on limiting current of changing the position of an ultrasonic horn tip (i.e. vertical and horizontal) and using a cylinder electrode (CE), was studied in an attempt to find the optimum position required for maximum sonoelectrochemical effect. The importance of the ultrasonic intensity, the electrode-horn distance and positioning (angle) in assigning limiting currents was also investigated. For the CE placed at an angle of 45 degrees with respect to the ultrasonic horn, it was suggested that the 50% increase in limiting current for the 'face-on' geometry is caused by an approximately 50% decrease in diffusion layer thickness for the 'face-on' geometry compared to the 'angular' geometry due to the difference in the sonicated areas for both geometries.     

Ferromagnetism induced by clustered Co in Co-doped anatase TiO2 thin films

We investigated ferromagnetism of a newly discovered ferromagnetic semiconductor Co-doped anatase TiO2 thin film, using the magnetic circular dichroism (MCD) at the Co L(2,3) absorption edges. The magnetic moment was observed to be approximately 0.1 micro(B)/Co in the measurements, but the MCD spectral line shape is nearly identical to that of Co metal, showing that the ferromagnetism is induced by a small amount of clustered Co. With thermal treatments at approximately 400 degrees C, the MCD signal increases, and the moment reaches up to approximately 1.55 micro(B)/Co, which is approximately 90% of the moment in Co metal. In the latter case, the cluster size was observed to be 20-60 nm.     

Dramatic enhancement of optical-field-ionization collisional-excitation x-ray lasing by an optically preformed plasma waveguide

Dramatic enhancement of optical-field-ionization collisional-excitation x-ray lasing is achieved by using an optically preformed plasma waveguide. With a 9-mm-long pure krypton plasma waveguide prepared by using the axicon-ignitor-heater scheme, lasing at 32.8 nm is enhanced by 400 folds relative to the case without the plasma waveguide. An output level of 8 x 10(10) photon/shot is reached at an energy conversion efficiency of 2 x 10(-6). The same method is used to achieve x-ray lasing in a gas jet for the high-threshold low-gain transition at 46.9 nm in neonlike argon.     

Non-resonant and resonant x-ray scattering studies on multiferroic TbMn2O5

Comprehensive x-ray scattering studies, including resonant scattering at Mn L, Tb L, and M edges, were performed on single crystals of TbMn2O5 for crystallographic data to elucidate the nature of its commensurate and incommensurate phases. The scattering results provide direct evidence of symmetry lowering to the ferroelectric phase driven by magnetically induced lattice modulations and show the presence of multiple magnetic orders. The competing orders under spin-frustrated geometry are believed to cause discommensuration and result in the commensurate-to-incommensurate phase transition around 24 K. It is proposed that the low temperature incommensurate phase consists of commensurate domains separated by antiphase domain walls which change both signs of spontaneous polarizations and x-ray scattering amplitudes for forbidden reflections.     

Ultrasonic monitoring of yoghurt formation by using AT-cut quartz: lighting of casein micelles interactions process during the acidification

The behavior of weak gels during their formation singularly attracts attention of dairy products factories. In our study we investigate acidified pre-heated milk gels formation that are fairly often used to product yoghurts. The gel formation requires a tight control of the first step of micelles modification process and the kinetics reaction parameters. The most current rheological parameters used to achieve the monitoring are the storage G' and the loss G' shear moduli and the gelation time. The study of these parameters is commonly performed at very low frequencies (1 Hz). Our technique uses a 6 MHz AT-cut quartz crystal immersed in an acidified milk solution kept at a constant temperature. This method is singularly effective to ensure a complete and a reliable follow-up of the viscoelastic parameters of casein gels. A suitable new model enables a complete follow-up of the micelles evolution from the viscoelastic properties. The experimental results of the G' and G' moduli versus temperature and versus glucono-delta-lactone (GDL) added to milk are analyzed. In order to understand the micelles modifications, an analysis of the viscoelastic evolution try to explain the validity of the various models of micelles modification. In addition a new accurate kinetics characteristic time is proposed. This time corresponds to the moment for which the elastic effect of material becomes significant. From the kinetics study of casein gels at various temperatures, the Arrhenius relationship and a modified Flory-Stockmayer relationship give us access to the activation energy. By using the proposed technique and the suitable models developed, the structure thus quality of dairy products may be better controlled.     

A guide to vehicle routing heuristics

Several of the most important classical and modern heuristics for the vehicle routing problem are summarized and compared using four criteria: accuracy, speed, simplicity and flexibility. Computational results are reported.