Layering transitions and Schlieren textures in Langmuir films of two organic radicals

Two paramagnetic radicals have been investigated in terms of their film-forming properties at the air-water interface. Although the radicals failed to display any mesomorphic behavior in the bulk, they were found prone to built-up multilayer films on the Langmuir trough. The molecules seem to dimerize in the upper layers of the films that exhibit striking Schlieren textures when observed with Brewster angle microscopy. These Schlieren textures, together with the ability to form multilayers, indicate that the molecules came close to displaying smectic mesomorphism. A tentative model of the layers' structure is proposed, and a suggestion for synthesizing new molecules with actual mesomorphism is offered. The presented results show that the study of the behavior of molecules at the air-water interface can shed a new light on their behavior in the bulk and help in the design of new magnetic mesogens.     

Active stabilization of a rapidly chirped laser by an optoelectronic digital servo-loop control

We propose and demonstrate a novel active stabilization scheme for wide and fast frequency chirps. The system measures the laser instantaneous frequency deviation from a perfectly linear chirp, thanks to a digital phase detection process, and provides an error signal that is used to servo-loop control the chirped laser. This way, the frequency errors affecting a laser scan over 10 GHz on the millisecond timescale are drastically reduced below 100 kHz. This active optoelectronic digital servo-loop control opens new and interesting perspectives in fields where rapidly chirped lasers are crucial.     

Characterization of strong electromagnetic field confinement on gold nanostructures by apertureless scanning near-field optical microscopy

We report on the detection of the optical near field of a 1D gold particle array by using an apertureless scanning near-field optical microscope. The strong near-field confinement measured above the grating proves unambiguously the near-field origin of the detected optical signal. Comparing the experiment with theory leads us to assign the optical near field to the first diffracted order of the grating, which is evanescent.     

Optimizing pressurized liquid extraction of microbial lipids using the response surface method

Response surface methodology (RSM) was used for the determination of optimum extraction parameters to reach maximum lipid extraction yield with yeast. Total lipids were extracted from oleaginous yeast (Rhodotorula glutinis) using pressurized liquid extraction (PLE). The effects of extraction parameters on lipid extraction yield were studied by employing a second-order central composite design. The optimal condition was obtained as three cycles of 15 min at 100°C with a ratio of 144 g of hydromatrix per 100 g of dry cell weight. Different analysis methods were used to compare the optimized PLE method with two conventional methods (Soxhlet and modification of Bligh and Dyer methods) under efficiency, selectivity and reproducibility criteria thanks to gravimetric analysis, GC with flame ionization detector, High Performance Liquid Chromatography linked to Evaporative Light Scattering Detector (HPLC-ELSD) and thin-layer chromatographic analysis. For each sample, the lipid extraction yield with optimized PLE was higher than those obtained with referenced methods (Soxhlet and Bligh and Dyer methods with, respectively, a recovery of 78% and 85% compared to PLE method). Moreover, the use of PLE led to major advantages such as an analysis time reduction by a factor of 10 and solvent quantity reduction by 70%, compared with traditional extraction methods.     

Silica encapsulation by miniemulsion polymerization: distribution and localization of the silica particles in droplets and latex particles

The impact of including hydrophobically modified silica on the morphology of miniemulsified monomer mixtures and that of the resulting polymer particles was investigated, with emphasis placed on the distribution and localization of the inorganic phase. Silica nanoparticles with diameters of 20 and 78 nm were first modified with γ-methacryloxypropyl trimethoxysilane (γ-MPS) to favor their dispersion in methyl methacrylate (MMA)/n-butyl acrylate (BuA) and mixtures of varying MMA to BuA weight ratios. The monomer-silica dispersions were then emulsified by ultrasonication, and the resulting silica-loaded droplets were examined using cryo-transmission electron microscopy (cryo-TEM). This represents the first time such silica-loaded nanodroplets were examined in this way. The results of the cryo-TEM show that whereas the silica particles could easily be dispersed in MMA or a mixture of MMA and BuA to produce stable dispersions, the emulsification step promotes the (re)localization of the silica at the oil-water interfaces. It was also shown that not all droplets are equal; some droplets and particles contain no silica whereas others contain many silica particles. After the subsequent polymerization step, the silica was buried inside the latex particles.     

Influence of velocity effects on the shape of N(2) (and air) broadened H(2)O lines revisited with classical molecular dynamics simulations

The modeling of the shape of H(2)O lines perturbed by N(2) (and air) using the Keilson-Storer (KS) kernel for collision-induced velocity changes is revisited with classical molecular dynamics simulations (CMDS). The latter have been performed for a large number of molecules starting from intermolecular-potential surfaces. Contrary to the assumption made in a previous study [H. Tran, D. Bermejo, J.-L. Domenech, P. Joubert, R. R. Gamache, and J.-M. Hartmann, J. Quant. Spectrosc. Radiat. Transf. 108, 126 (2007)], the results of these CMDS show that the velocity-orientation and -modulus changes statistically occur at the same time scale. This validates the use of a single memory parameter in the Keilson-Storer kernel to describe both the velocity-orientation and -modulus changes. The CMDS results also show that velocity- and rotational state-changing collisions are statistically partially correlated. A partially correlated speed-dependent Keilson-Storer model has thus been used to describe the line-shape. For this, the velocity changes KS kernel parameters have been directly determined from CMDS, while the speed-dependent broadening and shifting coefficients have been calculated with a semi-classical approach. Comparisons between calculated spectra and measurements of several lines of H(2)O broadened by N(2) (and air) in the ν(3) and 2ν(1) + ν(2) + ν(3) bands for a wide range of pressure show very satisfactory agreement. The evolution of non-Voigt effects from Doppler to collisional regimes is also presented and discussed.     

Ultrastructural study of spermiogenesis and the spermatozoon of Cavisoma magnum (Southwell, 1927) (Acanthocephala, Palaeacanthocephala, Cavisomidae), from Siganus lineatus (Pisces, Teleostei, Siganidae) (Valenciennes, 1835) in New Caledonia

This paper presents an ultrastructural study of Cavisoma magnum (Acanthocephala, Cavisomatidae) with a Transmission Electron Microscopy tool. This parasite of the fish Siganus lineatus is here reported for the first time from off New Caledonia, South Pacific. It is the first study describing the ultrastructure, spermiogenesis and spermatozoon of a species of the family Cavisomatidae. The young spermatid of C. magnum possesses a centriole constituted of doublets without a central element. After the elaboration of a flagellum of 9+2 pattern, the centriole migrates in a nuclear groove. Then the flagellum migration occurs and gives rise to a spermatozoon. The distribution and the size of the protein granules are reported and the posterior extremity appears like a chromatin lamina wave. Comparative ultrastructural data are presented on sperm and spermiogenesis of the Acanthocephala and Rotifers examined to date and the phylogenetic implications are discussed.     

Millijoule laser pulse delivery for spark ignition through kagome hollow-core fiber

We report on power handling oriented design of kagome lattice hollow-core fiber and demonstrate through it for the first time nanosecond laser pulses induced spark ignition in a friendly manner. Two different core designs and transmission bands are investigated and evaluated. The energy threshold damage was measured to be in excess of the 10 mJ level and the output power density is approaching the TW/cm2 after focusing; demonstrating the outstanding ability of such fiber for high power delivery.     

Late stage spreading of stratified liquids: theory

Spreading of a liquid crystal droplet on a solid surface resembles the collapse of a zigguratlike structure and ends up with only two molecular terraces. A model is proposed to describe the time evolution of this late stage structure. It differs from the previous de Gennes-Cazabat theory by several aspects: (1) it avoids previous approximations and gives exact solutions of the kinetic equations; (2) it covers strongly layered liquids such as smectic liquid crystals; (3) it introduces the two-dimensional Laplace pressure as an essential motor for spreading; (4) it takes into account the liquid∕gas transition in the surface layer that was consistently reported in experiments with 8CB.