Thermal and photochemical reactivity of oxygen atoms on gold nanocluster surfaces

Reduction of oxidized gold nanoclusters by exposures to foreign gases and irradiation of UV photons has been investigated using X-ray photoelectron spectroscopy. Gold nanoclusters with narrow size distributions protected by alkanethiolate ligands were deposited on a TiO₂(1 1 0) surface with dip coating. Oxygen plasma etching was used for removal of alkanethiolate ligands and oxidization of gold clusters. The oxidized gold clusters were exposed to CO, C₂H₂, C₂H₄, H₂, and hydrogen atoms. Although, C₂H₄ and H₂ did not show any indications of reduction of oxidized gold clusters, CO, C₂H₂, and hydrogen atoms reduced the oxides on gold cluster surfaces. Among them, hydrogen atoms were most effective for reduction. Irradiation of UV photons around 400 nm could also reduce the oxidized gold clusters. The photochemical reduction mechanism was proposed as follows. The photo-reduction was initiated by electronic excitation of gold clusters and oxygen atoms activated reacted with carbon atoms at the surfaces of gold clusters. Carbon species were likely absorbed in gold clusters or remained at the boundaries between gold clusters when gold clusters agglomerated during oxygen plasma exposures. As the photochemical reduction progressed, carbon atoms segregated to the surfaces of gold clusters.     

Studies on thermal degradation of acrylonitrile–butadiene–styrene copolymer (ABS-Br) containing brominated flame retardant

The thermal degradation of acrylonitrile-butadiene-styrene copolymer (ABS-Br; 10 g) containing brominated flame retardant (Br: 9.59 wt.%) was carried out at 450 °C using a semi batch operation using two different temperature programs. The heating rate was found to affect the quality of the degradation oil and yield of products (liquid, gas and residue). Data on the effect of the temperature program on the accumulation of liquid products was presented. It was found that the majority of the bromine was concentrated in the carbon residue and while majority of the nitrogen accumulates in the liquid products irrespective of degradation mode. The use of a one step constant heating rate process (I) produced a higher liquid yield (39%), than a two step process (29%). Differences were also noted in the Br and N contained in the liquids produced by the two processes.     

Rattling in the Quadruple Perovskite CuCu3V4O12

Of particular interest is a peculiar motion of guest atoms or ions confined to nanospace in cage compounds, called rattling. While rattling provides unexplored physical properties through the guest–host interactions, it has only been observed in a very limited class of materials. Herein, we introduce an A‐site‐ordered quadruple perovskite, CuCu₃V₄O₁₂, as a new family of cage compounds. This novel AA′₃B₄O₁₂‐type perovskite has been obtained by a high‐pressure synthesis technique and structurally characterized to have cubic Im$\bar 3$ symmetry with an ionic model of Cu²⁺Cu²⁺₃V⁴⁺₄O₁₂. The thermal displacement parameter of the A‐site Cu²⁺ ion is as large as U_iso≈0.045 Ų at 300 K, indicating its large‐amplitude thermal oscillations in the oversized icosahedral cages. Remarkably, the presence of localized phonon modes associated with rattling of the A‐site Cu²⁺ ion manifests itself in the low‐temperature specific heat data. This work sheds new light on the structure–property relations in perovskites.     

Direct Transformation of Molecular Dinitrogen into Ammonia Catalyzed by Cobalt Dinitrogen Complexes Bearing Anionic PNP Pincer Ligands

The direct formation of ammonia from molecular dinitrogen under mild reaction conditions was achieved by using new cobalt dinitrogen complexes bearing an anionic PNP‐type pincer ligand. Up to 15.9 equivalents of ammonia were produced based on the amount of catalyst together with 1.0 equivalent of hydrazine (17.9 equiv of fixed nitrogen atoms).     

Mesoporous TiO2 core-shell spheres composed of nanocrystals with exposed high-energy facets: facile synthesis and formation mechanism

A facile new method that combines electrospray and hydrothermal treatment is used to prepare mesoporous core-shell TiO(2) spheres with high specific surface areas and high pore volumes. Interestingly, the resulting TiO(2) spheres are composed of anatase TiO(2) nanocrystals with exposed step-like {001} and smooth {010} facets. The percentage of exposed {001} facets can be adjusted by changing the experimental parameters used in the electrospray and hydrothermal treatment processes, such as the contents of poly(N-vinyl-2-pyrrolidone) and acetic acid. The combination of high specific surface area (>100 m(2) g(-1)), high pore volume (>0.30 cm(3) g(-1)), useful pore size (10-15 nm), spherical core-shell structure, and exposed high energy facets makes these TiO(2) spheres an important candidate for use in many photoelectrochemical applications. The formation mechanism of the mesoporous TiO(2) spheres is also studied. The great advantage of this method is that interesting and complicated mesoporous superstructures can be prepared using electrospray technology.     

Towards slow μ− production via muon catalyzed fusion

Slow ^– production via dd-CF using a two-layer arrangement is investigated. To determine its feasibility, experimental measurements are now in progress using the muonic X-ray detection method. The following experimental steps are being considered: (1) measurement of the number of ^– stopped inside a solid H₂/D₂ layer by detecting p K X-rays, (2) hot d emission detection by placing a secondary target at a distance of 10–30 mm from the layer and by detecting specific delayed X-rays, (3) measurement of the disappearance of d emission as the added D₂ layer is increased, (4) dd-CF measurement by detecting fusion protons, and (5) slow ^– emission detection. Results of the initial test experiment are presented.     

Nickel‐Catalyzed Dimerization and Alkylarylation of 1,3‐Dienes with Alkyl Fluorides and Aryl Grignard Reagents

In the presence of a nickel catalyst, 1,3‐butadiene undergoes selective dimerization and alkylarylation with alkyl fluorides and aryl Grignard reagents to give 1,6‐octadienes with alkyl and aryl groups at the 3‐ and 8‐positions, respectively, by the consecutive formation of three carbon–carbon bonds. The formation of an anionic nickel complex plays an important role in forming C?C bonds with alkyl fluorides.     

Beta-1,3-glucan polysaccharides as novel one-dimensional hosts for DNA/RNA, conjugated polymers and nanoparticles

Beta-1,3-glucan polysaccharides have triple-stranded helical structures whose sense and pitch are comparable to those of polynucleotides. We recently revealed that the beta-1,3-glucans could interact with certain polynucleotides to form triple-stranded and helical macromolecular complexes consisting of two polysaccharide-strands and one polynucleotide-strand. This unique property of the beta-1,3-glucans has made it possible to utilize these polysaccharides as potential carriers for various functional polynucleotides. In particular, cell-uptake efficiency of the resultant polysaccharide/polynucleotide complexes was remarkably enhanced when functional groups recognized in a biological system were introduced as pendent groups. The beta-1,3-glucans can also interact with various one-dimensional architectures, such as single-walled carbon nanotubes, to produce unique nanocomposites, in which the single-walled carbon nanotubes are entrapped within the helical superstructure of beta-1,3-glucans. Various conductive polymers and gold nanoparticles are also entrapped within the helical superstructure in a similar manner. In addition, diacetylene monomers entrapped within the helical superstructure can be photo-polymerized to afford the corresponding poly(diacetylene)-nanofibers with a uniform diameter. These findings indicate that the beta-1,3-glucans are very attractive and useful materials not only in biotechnology but also in nanotechnology. These unique properties of the beta-1,3-glucans undoubtedly originate from their inherent, very strong helix-forming character which has never been observed for other polysaccharides.     

Near-infrared fluorescent probes: a next-generation tool for protein-labeling applications

The development of near-infrared (NIR) fluorescent probes over the past few decades has changed the way that biomolecules are imaged, and thus represents one of the most rapidly progressing areas of research. Presently, NIR fluorescent probes are routinely used to visualize and understand intracellular activities. The ability to penetrate tissues deeply, reduced photodamage to living organisms, and a high signal-to-noise ratio characterize NIR fluorescent probes as efficient next-generation tools for elucidating various biological events. The coupling of self-labeling protein tags with synthetic fluorescent probes is one of the most promising research areas in chemical biology. Indeed, at present, protein-labeling techniques are not only used to monitor the dynamics and localization of proteins but also play a more diverse role in imaging applications. For instance, one of the dominant technologies employed in the visualization of protein activity and regulation is based on protein tags and their associated NIR fluorescent probes. In this mini-review, we will discuss the development of several NIR fluorescent probes used for various protein-tag systems.

This minireview describes the development of NIR chemical probes for various protein-tag systems.