Carbon dioxide as a porogen on self-organized nano-structure of amphiphilic side-chain type liquid crystalline di-block copolymers

Liquid and supercritical carbon dioxide (LCO₂, SCCO₂) have been used as a porogen to swell self-organized nano-structure of an amphiphilic side-chain type liquid crystalline PEO–b-PMA(Az) copolymer. Carbon dioxide interacts with the hydrophilic PEO domain rather than the PMA matrix. The preferential interactions of PEO component with carbon dioxide result in a solvent-induced surface topology changes and the generation of a nano-porous template. The area density of the nano-pores is identical to that of the original copolymer film while keeping the hexagonally packed PEO nano-scale organization. Since the process is based on the gases diffusion on solid surfaces under controlled temperature and since neither polymer block is fundamentally altered by the sorption effect, the process is fully reversible. The supercritical condition of CO₂ treatment gives rise to the highest expansion of pre-patterned PEO cylinders and consecutively induces the retardation of PEO crystallization. This versatile thermo-diffuso approach would be applied to a wide variety of pre-patterned copolymers systems for nano-templating applications requiring nano-scale features sizes and/or area feature densities.     

A stable dialkylphosphinyl radical

Dialkylphosphinyl radical 1 was synthesized as thermally stable yellow crystals and found to be monomeric both in solution and in the solid state. EPR spectrum showed that the spin density of 1 is mainly localized on the 3p orbital of the dicoordinated phosphorus atom. A distinct absorption band due to the electronic transition from nonbonding electron pair orbital to singly occupied 3p orbital on the phosphorus atom of 1 was observed at 445 nm in solution. Phosphinyl radical 1 underwent facile reaction with carbon tetrachloride, hydrogen abstraction, and a unique reaction with a persistent radical, galvinoxyl, giving a cyclic phosphaalkene and a silylether.     

Selective and Nonselective Cleavages in Positive and Negative CID of the Fragments Generated from In-Source Decay of Intact Proteins in MALDI-MS

Selective and nonselective cleavages in ion trap low-energy collision-induced dissociation (CID) experiments of the fragments generated from in-source decay (ISD) with matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) of intact proteins are described in both positive and negative ion modes. The MALDI-ISD spectra of the proteins demonstrate common, discontinuous, abundant c- and z′-ions originating from cleavage at the N–Cα bond of Xxx-Asp/Asn and Gly-Xxx residues in both positive- and negative-ion modes. The positive ion CID of the c- and z′-ions resulted in product ions originating from selective cleavage at Asp-Xxx, Glu-Xxx and Cys-Xxx residues. Nonselective cleavage product ions rationalized by the mechanism of a “mobile proton” are also observed in positive ion CID spectra. Negative ion CID of the ISD fragments results in complex product ions accompanied by the loss of neutrals from b-, c-, and y-ions. The most characteristic feature of negative ion CID is selective cleavage of the peptide bonds of acidic residues, Xxx-Asp/Glu/Cys. A definite influence of α-helix on the CID product ions was not obtained. However, the results from positive ion and negative ion CID of the MALDI-ISD fragments that may have long α-helical domains suggest that acidic residues in helix-free regions tend to degrade more than those in helical regions.

Persistent Antimony‐ and Bismuth‐Centered Radicals in Solution

Stibinyl and bismuthinyl radicals are recognized as representative intermediates of antimony and bismuth compounds, but still elusive in the condensed phase. We successfully synthesized persistent stibinyl and bismuthinyl radicals in solution by facile dissociation of the corresponding dimers with bulky substituents. We characterized the radicals by NMR and UV/Vis spectroscopy and estimated the thermodynamic parameters for the dissociation equilibria. The radicals show n→p (HOMO→SOMO) transition bands at 497 nm (stibinyl) and 543 nm (bismuthinyl) in 3‐methylpentane and react with a stable nitroxyl radical to give the cross‐radical coupling products in good yields.     

Quartz crystal microbalance with dissipation monitoring of the enzymatic hydrolysis of steam-treated lignocellulosic nanofibrils

Quartz crystal microbalance with dissipation (QCM-D) monitoring was performed to investigate the impact of steam treatment (ST) on the enzymatic hydrolysis of lignocellulosic nanofibrils (LCNFs). ST at mild temperatures up to 140 °C mainly affected the hemicellulose content of LCNFs. The hemicellulose constituents in the water-soluble fraction and the residual LCNF were quantified. The impact of changes in hemicellulose by ST on enzymatic hydrolysis was monitored by QCM-D using Acremonium cellulase as a source of multicomponent enzymes including hemicellulases. LCNFs without ST showed distinctive initial changes in frequency and energy dissipation, which differed from those of pure cellulose film, whereas these changes shifted toward typical changes of enzymatic hydrolysis of pure cellulosic films with increasing ST temperature. The QCM-D results suggested that hemicellulose located around cellulose microfibrils is rapidly decomposed, thus exposing the cellulose surface shortly after initial enzymatic hydrolysis, and then the main enzymatic hydrolysis of cellulose occurs.     

Electron microscopic and light scattering observation on a system with two iridescent phases

Electron microscopic observations and classical light-scattering measurements have been carried out for dodecyldimethylaminoxide/hexanol/water mixtures in the concentration range where iridescent colors occur. This system has two different iridescent phases. The iridescent phase with more hexanol forms quickly, and the phase with less hexanol forms very slowly. Three different isotropic phases which show strong flow birefringence are found near both iridescent phases. The electron microscopic pictures show clearly that only one of these isotropic phases with strong flow birefringence is a bicontinuous sponge phase (L_3h -phase). This is the phase which comes out by adding some alkanol to the upper lamellar phase. The flow birefringent phase below the lower lamellar phase forms unilamellar vesicles. The flow birefringent phase which occurs between both iridescent phases contains multilamellar vesicles and is shown to be a precursor of a lamellar phase.     

Microscopic measurements in La-NQR of the ternary carbide superconductor LaNiC2

¹³⁹La-NQR measurements have been carried out in the ternary carbide superconductor LaNiC₂. The nuclear quadrupole frequency and the asymmetry parameter of ¹³⁹La in LaNiC₂ were estimated to be about 1.9 MHz and 0, respectively. In the normal state, the nuclear spin relaxation rate (1/T₁) in the ¹³⁹La NQR signal was proportional to temperature (T) in zero external field above the superconducting transition temperature (T_c) or in an external field larger than the superconducting critical field, which means the system is in the Fermi-liquid state. In the superconducting state, on the other hand, 1/T₁ decreases no more linearly with T, but decreases rapidly exponentially as exp (−Δ/k_BT) at low T with an appreciable enhancement just below T_c. The value of the superconducting energy gap, 2Δ, was estimated to be 3.34k_BT_c, compared with 3.52k_BT_c of the BCS-value. This result strongly suggests that the superconductivity in LaNiC₂ is of a conventional BCS type.     

The crystal structures of α,ω-diaminoalkanecadmium(II) tetracyanonickelate(II)-aromatic molecule inclusion compounds. I. 1,4-diaminobutanecadmium(II) tetracyanonickelate(II)-2,5-xylidine (1/1): Cd(NH2(CH2)4NH2)Ni(CN)4. (CH3)2C6H3NH2

The title compound crystallizes in monoclinic space group P2₁/m with a=9.795(2), b=15.010(2), c=7.125(1) Å, =105.56(1)^o, and Z=2. The structure has been refined to the weighted Rw=0.042 for 2742 reflections collected by counter method. Two-dimensionally extended but wavy cyanometal complex layers are bridged by 1,4-diaminobutane (dabn) to give a three-dimensional host structure which provides a channel-like cavity with the guest 2,5-xylidine molecule. The skeleton of the bridging dabn takes a trans-cis conformation to make the packing efficient between the cavity and the guest molecule. The series of Hofmann-dabn-type Cd(NH₂ (CH₂)₄NH₂) Ni (CN)₄. nG inclusion compounds are described for several aromatic guest molecules G with various stoichiometric coefficients n. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82020 (22 pages).