Glass/PDMS hybrid microfluidic device integrating vertically aligned SWCNTs to ultrasensitive electrochemical determinations

This communication reports a promising platform for rapid, simple, direct, and ultrasensitive determination of serotonin. The method is related to integration of vertically aligned single-walled carbon nanotubes (SWCNTs) in electrochemical microfluidic devices. The required microfabrication protocol is simple and fast. In addition, the nanomaterial influenced remarkably the obtained limit-of-detection (LOD) values. Our system achieved a LOD of 0.2 nmol L(-1) for serotonin, to the best of our knowledge one of the lowest values reported in the literature.     

On the influence of a constant force on the appearance of period-doubling bifurcations and chaos in a harmonically excited pure cubic oscillator

A pure cubic oscillator with a constant and a harmonic force acting on it, which represents a nonlinear asymmetric system, is considered. Building on previous studies on the matter, analytical and numerical approaches are used to examine and illustrate its dynamics related to the phenomenon of period-doubling bifurcations and their development into chaos for different values of the constant force. The region of control parameters in which this scenario is possible is determined and discussed with a view to revisiting literature results and to giving novel and deeper insights into the phenomenon related to the influence of the magnitude of the constant force and certain resonances.     

Rheological properties of functionalised thermosensitive copolymers for injectable applications in medicine

Functionalised triblock copolymers based on poly((lactic acid)-co-(glycolic acid)) and poly(ethylene glycol) (PLGA-PEG-PLGA) further modified with 3-methylenetetrahydrofuran-2,5-dione (itaconic anhydride; ITA) exhibited sol-gel transition induced by increasing temperature. Rheological properties of a series of ITA/PLGA-PEG-PLGA/ITA copolymer concentrations (6?C24 mass %) in deionised Milli-Q water were studied by both the test tube inverting method (TTIM) and rheometer. The gel stiffness increased with the polymer concentration shifting the gel point of the copolymer to the lower temperature. The present study demonstrates that each method describes a sol-gel transition, but the combined method gives comprehensive information about changes in colour, viscosity, elastic and loss moduli. Characterisation of such a gel is necessary for its further use, in order to determine whether the material is appropriate as an injectable biomedical hydrogel.     

Effect of Low Temperature Air Plasma Treatment on Wetting and Flow Properties of Kaolinite Powders

It was found in this study that the air plasma treatment of particular kaolinite has led to the change of its wettability, which was reflected in the decreased values of water contact angles of wetting from 88.7° for virgin kaolinite to 86.3° for 30?min air plasma treated one. Plasma treated samples show higher average surface energies in the wide range of coverage regimes in comparison to the virgin samples as determined by inverse gas chromatography. Results of these measurements confirmed our assumption, that air plasma treatment activates surface energy of the crystal planes of the kaolinite as reflected in the broadened dispersive surface energy distribution after 10?min treatment time. However with prolonged 30?min treatment time the dispersive surface energy distribution profile was decreased. We assume, that the latter decrease reflects the distorsion of the crystal lattice of the kaolinite as confirmed by FTIR analysis as reflected in changes of Si?CO?CSi and Al₂O?CH characteristic absorption bands. Calculated dispersive surface free energy for 24?% surface coverage was increased from original 35?mJ/m² to 40.3 and 40.8?mJ/m² for 10 and 30?min treatment times. There were determined yield locus and flow function dependencies at different stress levels for virgin and different time plasma treated samples (flow index??ff _c , effective angle of internal friction???? _e , unconfined yield strength???? _c ). It was found that by plasma treatment the character of the flow was shifting from region of very cohesive (ff _c ?=?2.39) to the cohesive (ff _c ?=?3.19). For untreated samples effective angle of internal friction was decreased with increasing applied consolidation stress, while for plasma treated kaolinite it was increased.     

An Alternative Preparation of 1-(N,N-Dimethylaminomethyl)-1′-(diphenylphosphanyl)ferrocene: Synthesis and Structural Characterization of AuI and PdII Complexes with this Hybrid Ligand

1-(N,N-Dimethylaminomethyl)-1′-(diphenylphosphanyl)ferrocene (1) was synthesized in good yield by lithiation of 1-bromo-1′-(diphenylphosphanyl)ferrocene and subsequent reaction with Eschenmoser''s salt (dimethylmethylideneammonium iodide). Making use of an easily accessible, nontoxic starting material, this procedure represents a convenient alternative to the original synthetic protocol based on stepwise lithiation/functionalization of 1,1′-bis(tributylstannyl)ferrocene and reductive amination [M. E. Wright, Organometallics 1990, 9, 853–856]. Compound 1 has typical hybrid-donor properties. When reacted with [AuCl(tht)] (tht=tetrahydrothiophene), it afforded the expected Au^I phosphane complex [AuCl(1-κP)] (2). An attempted removal of the chloride ligand from 2 with AgClO₄ produced an ill-defined material formulated as Au(1)ClO₄. The uncoordinated amine substituent reacted with traces of hydrogen chloride formed by slow decomposition typically occurring in solution. In this manner, complexes [AuCl(Ph₂PfcCH₂NHMe₂)]Cl (3, fc=ferrocene-1,1′-diyl) and [AuCl(Ph₂PfcCH₂NHMe₂)]ClO₄ (4) were isolated from crystallizations experiments with 2 and Au(1)ClO₄, respectively. On a larger scale, complex 3 was prepared easily from 2 and hydrogen chloride. The course of reactions between [PdCl₂(cod)] (cod=cycloocta-1,5-diene) and 1 were found to depend on the ligand-to-metal ratio. Whereas the reaction with two equivalents of 1 afforded bis(phosphane) complex trans-[PdCl₂(1-κP)₂] (5), that of a Pd:P ratio 1:1 produced ligand-bridged dimer [(μ-1)PdCl₂]₂ (6). With hydrogen chloride, complex 6 reacted to afford zwitterionic complex [PdCl₃(1H-κP)] (7), which was also formed when ligand 1 and [PdCl₂(cod)] were allowed to react slowly by liquid-phase diffusion of their chloroform solutions. The compounds were characterized by spectroscopic methods (multinuclear NMR and ESI–MS), and the molecular structures of complex 2–4, 6⋅2CHCl₃ and 7⋅1.5CHCl₃ were determined by single-crystal X-ray diffraction analysis.     

Volatile organic compounds from Centaurium erythraea Rafn (Croatia) and the antimicrobial potential of its essential oil

GC and MS were used for the analysis of Croatian Centaurium erythraea Rafn essential oil (obtained by hydrodistillation) and headspace (applying headspace solid-phase microextraction). The headspace contained numerous monoterpene hydrocarbons (the major ones were terpinene-4-ol, methone, p-cymene, γ-terpinene and limonene). Oxygenated monoterpenes were present in the headspace and oil, while 1,8-cineole, bornyl acetate and verbenone were present only in the headspace. High headspace percentages of toluene and naphthalene were found, followed by hemimellitene. Lot of similarities were observed with Serbian C. erythraea oil [neophytadiene (1.4%), thymol (2.6%), carvacrol (6.1%) and hexadecanoic acid (5.7%)], but different features were also noted such as the presence of menthol, menthone and phytone. The oil fractionation enabled identification of other minor compounds not found in total oil such as norisoprenoides, alk-1-enes or chromolaenin. The essential oil showed antimicrobial potential on Escherichia coli, Salmonella enteritidis, Staphylococcus aureus and Bacillus cereus. On the other hand, no antibacterial activity of the oil was observed on Pseudomonas fluorescens and Lysteria monocytogenes.     

Synthesis of Aromatic Compounds by Catalytic C?C Bond Activation of Biphenylene or Angular [3]Phenylene

Substituted phenanthrenes and picenes were easily prepared by reaction of biphenylene or angular [3]phenylene with various alkynes in the presence of a catalytic amount of [IrCl(cod)]₂/dppe (cod=1,5‐cyclooctadiene, dppe=1,2‐bis(diphenylphosphino)ethane). The reaction is based on C? C bond activation of the cyclobutane ring. The reaction tolerates the presence of bulky groups on the alkyne, such as the ferrocene moiety. In addition, a catalytic system based on [RhCl(cod)]₂/dppe enabled the, hitherto unreported, reaction of biphenylene with nitriles to provide phenanthridines.     

Reference frames in harmonic coordinates: geometric and physical aspects

This work is focused on the geometrical and physical characteristics of the class of reference frames associated to harmonic coordinates. Precisely, we express in relative form the harmonicity conditions and consider the so called ??spatially harmonicity?? of a reference frame in spherical symmetry. The initial data problem is then analyzed in polar coordinates and the obtained results are applied to special cases of exact solutions.     

Dibenzo[b,f]oxepin‐10(11H)‐one and dibenzo[b,f]thiepin‐10(11H)‐one as useful synthons in the synthesis of various dibenzo[e,h]azulenes

The present review focuses on dibenzo[b,f]oxepin‐10(11H)‐one ( I , X = O) and dibenzo[b,f]thiepin‐10(11H)‐one ( I , X = S) as common synthons in the efficient synthesis of various dibenzoxepino[4,5‐ and dibenzothiepino[4,5]‐fused five‐membered heterocycles: [2,3] fused thiophene ( II ), [3,4] fused thiophene ( III ), furan ( IV ), pyrrole ( V ), imidazole ( VI ), pyrazole ( VII ), oxazole ( VIII ), and thiazole ( IX ). The potential of I to be converted into reactive intermediates that readily undergo heteroaromatic annulation reactions by cyclocondensation with proper binucleophiles allows formation of a range of enumerated functionalized dibenzo[e,h]azulene [4] structures ( II , III , IV , V , VI , VII , VIII , IX ). Dibenzo[e,h]azulenes as heterotetracyclic scaffold can be exploited in further modifications to obtain compounds with altered physicochemical and biological profile. J. Heterocyclic Chem., (2012).