Efficient synthesis of 2- and 3-substituted-2,3-dihydro [1,4]dioxino[2,3-b]pyridine derivatives

A versatile new approach for the synthesis in three steps of 2-substituted-2,3-dihydro[1,4]dioxino[2,3-b]pyridines B via a Smiles rearrangement using easily available reagents is described. A study illustrating the influence of experimental conditions on the progress of the reaction is reported.     

Solid Lipid Nanoparticles (SLNs): Preparation and Properties of Calix[4]resorcinarene Derived Systems.

Solid Lipid Nanoparticles (SLNs) have been prepared fromc-2,c-8,c-14,c-20-tetraundecyl-4,6,10,12,16,18,22,24-octahydroxyresorc[4]areneas colloidal suspensions. Photon Correlation Spectroscopy studies revealed aparticle hydrodynamic diameter of 150 nm. Non-contact mode Atomic ForceMicroscopy allows observation of the particles as slightly flattened sphericalobjects of 236 (±40) nm diameter and 145 (±40) nm height. Thestudy of the preparation parameters showed that shear force does not affectthe hydrodynamic size of the SLNs. In contrast, the viscosity and the pH ofthe aqueous phase, the amphiphile concentration in the organic phase and thevolume of organic phase used, all lead to variation in the size of the particles.In term of post preparation parameters only the ionic strength has been shownto affect significantly the particle size; while the pH of the storing solution,microwave, ultrasonic and thermal treatments do not. Short and long-termstability studies have been performed to measure the effect of the ionic strengthon the stability of the particles. The use of carbohydrate cryoprotectants does notallow re-dispersion of the colloidal suspension after freeze-drying.     

Kinetics of exothermal decomposition of some ketone-2,4-dinitrophenylhydrazones

In this study, the thermal stability and exothermal decomposition of some ketone-2,4-dinitrophenylhydrazones have investigated using the DSC technique. The synthesized and purified crystalline solids are thermally stable and start to decompose after melting. Non-isothermal DSC curves, recorded at several heating rates, were used to evaluate the melting properties and the kinetics of thermal decomposition. The isoconversional and model-fitting methods were applied to determine the activation parameters from the common analysis of multiple curves measured at different heating rates. Based on the results of the model??free method, a kinetic model was derived, and the kinetic parameters were obtained by means of a multivariate nonlinear regression. The results are discussed in relation to the effect of the ketone structure.     

Silicone composites containing stabilized silver clusters or nanoparticles

Silver nanoparticles are of high importance due to their electrical, magnetic, and optical properties, as well as catalytic and biocidal activity that are superior to the bulk silver and other metals. To prepare certain devices, generally, silver is incorporated into a matrix either as preformed or in situ‐generated particles. Silver nanoparticles were generated in situ into a silicone matrix formed by cohydrolysis of the mixture of silanes, each of them having a certain role: dimethyldiethoxysilane (DMDES) as a precursor for highly flexible polydimethylsiloxane, methyltriethoxysilane (MTES) as a cross‐linker highly compatible with polydimethylsiloxane, and 3‐aminopropyltriethoxysilane as a stabilizer, since it can readily complex to silver atoms through its amine functionality. Dimethylformamide (DMF) was used as a solvent for the silver nitrate and reducing agent. The samples were investigated both in sol state and as aged coating films deposited on glass substrate. The complexation of the silver and the matrix formation were emphasized by FTIR. The size of the formed silicone particles encapsulating silver was estimated by dynamic light scattering (DLS) (about 100 nm) in sol and by AFM in film (about 90 nm). The formation of the clusters or nanoparticles depending on the ratio between the reducing and complexing agents was evidenced by UV–Vis absorption spectra. Thus, it would create conditions to stop and isolate clusters at the desired size by precise control of the experimental conditions. The composites could be used alone as antibacterial‐coating materials but also, porous silica having incorporated silver clusters with potential applicability in catalysis may result after their calcination. Copyright © 2010 John Wiley & Sons, Ltd.     

Facile access to γ-aminothiols from 1,3-thiazines via a microwave-assisted three-component reaction

A new efficient and general synthetic methodology to access γ-aminothiols was investigated and developed. 1,3-Thiazines were used as convenient precursors and were prepared by a fast microwave-assisted three-component reaction (3CR) of thioamides, aldehydes, and alkenes. The transformation of thiazines into aminothiols was achieved via a thiazinium salt hydrolysis, in three very facile steps.     

Benzo[1,2‐b:4,5‐b′]dithiophene Building Block for the Synthesis of Semiconducting Polymers

This review covers the synthesis and polymerization of benzo[1,2‐b: 4,5‐b′]dithiophene (BDT) to generate semiconducting polymers used in organic field‐effect transistors (OFET) and organic solar cells applications.     

The Effect of UV-Irradiation on Poly(vinyl alcohol) Composites with Bacterial Cellulose

The development of biodegradable packaging materials, especially from renewable resources is a constant preoccupation of nowadays, because of the environmental problems caused by synthetic polymers. The combination of cellulose with other polymeric materials could be an ecologic alternative and a way to use renewable resources for food packaging. Bacterial cellulose which is produced by microbial fermentation is also a promising material which can be used not only in biomedical application, but also as food packaging material. In this research different composite films between poly(vinyl alcohol)-bacterial cellulose (PVA-BC) were obtained by casting method. The obtained films were UV irradiated for different periods of times from 1 to 10 hours, using a mercury lamp, Philips TUV-30, emitting light mainly at 254 nm. Changes in FT-IR spectra before and after UV irradiation and the modification of transparency and of the swelling characteristics of the films were observed. As it was expected the composites materials are sensitive at UV exposure.     

A convenient synthesis of pyrazolo[3,4‐d]pyrimidine‐4,6‐dione and pyrazolo[4,3‐d]pyrimidine‐5,7‐dione derivatives

Pyrazolo‐[3,4‐d]pyrimidine‐4,6‐diones 5 and pyrazolo[4,3‐d]pyrimidine‐5,7‐diones 7 were synthesized by Curtius rearrangement of pyrazolic mono‐esters 2 and 3 followed by hetero‐cyclization via the ureas derivatives 4 and 6 under alkaline conditions.     

Development of novel antioxidants: design,synthesis, and reactivity

We are attempting to develop novel synthetic antioxidants aimed at retarding the effects of free-radical induced cell damage. In this paper we discuss the design strategy and report the synthesis of seven novel antioxidants, including six catechols and a benzylic phenol. The bond dissociation enthalpy (BDE) for the most active (weakest) OH bond in each molecule was calculated by theoretical methods, as well as the BDE for the semiquinone radical. Reaction rates with the nitrogen-centered free radical DPPH(*) were measured in ethyl acetate. The log of k(DPPH) for bimolecular reaction correlated well with the primary BDE. The correlation between rate constants and calculated BDEs shows that the BDE is a good predictor of antioxidant activity with DPPH(*), suggesting that our design criteria are useful and that these compounds should undergo further testing in cell cultures and in animal models.     

Multivalent Recognition of Concanavalin A by {Mo132} Glyconanocapsules—Toward Biomimetic Hybrid Multilayers

Herein, we consider Müller’s spherical, porous, anionic, molybdenum oxide based capsule, (NH₄)₄₂‐ [{(Mo^VI)Mo^VI₅O₂₁(H₂O)₆}₁₂{Mo^V₂O₄(CH₃COO)}₃₀]?10 CH₃COONH₄? 300 H₂O≡(NH₄)₄₂? 1 a ?crystal ingredients≡ 1 , {Mo₁₃₂}, as an effective sugar‐decorated nanoplatform for multivalent lectin recognition. The ion‐exchange of NH₄⁺ ions of 1 with cationic‐sugars, D ‐mannose‐ammonium chloride ( 2 ) or D ‐glucose‐ammonium chloride ( 3 ) results in the formation of glyconanocapsules (NH₄)_42?n 2 _n? 1 a and (NH₄)_42?m 3 _m? 1 a . The Mannose (NH₄)_42?n 2 _n? 1 a capsules bind selectively Concanavalin A (Con A) in aqueous solution, giving an association avidity constant of ${K{{{\rm multi}\hfill \atop {\rm a}\hfill}}}$ =4.6×10⁴ M ^?1 and an enhancement factor of β=K${{{{\rm multi}\hfill \atop {\rm a}\hfill}}}$ /K${{{{\rm mono}\hfill \atop {\rm ass}\hfill}}}$ =21.9, reminiscent of the formation of “glycoside clusters” on the external surface of glyconanocapsule. The glyconanocapsules (NH₄)_42?n 2 _n? 1 a and (NH₄)_42?m 3 _m? 1 a self‐assemble in “hybrid multilayers” by successive layer‐by‐layer deposition of (NH₄)_42?n 2 _n? 1 a or (NH₄)_42?m 3 _m? 1 a and Con A. These architectures, reminiscent of versatile mimics of artificial tissues, can be easily prepared and quantified by using quartz crystal microgravimetry (QCM). The “biomimetic hybrid multilayers” described here are stable under a continual water flow and they may serve as artificial networks for a greater depth of understanding of various biological mechanisms, which can directly benefit the fields of chemical separations, sensors or storage‐delivery devices.