Modelling of sorbic acid diffusion through bacterial cellulose-based antimicrobial films

Antimicrobial packaging protects the product from the external environment and microbial contamination, conferring numerous advantages on human health. Interest in biopolymers as packaging materials has considerably increased recently. Bacterial cellulose is an interesting biomaterial produced as nanofibrils by Acetobacter xylinium and is a promising candidate due to its remarkable properties. New composite materials with antimicrobial properties were developed in this work, containing poly(vinyl alcohol) (PVA) as polymer matrix and ground bacterial cellulose (BC) as reinforcing fibres. Sorbic acid was used as an antimicrobial agent because it is a preservative recognised in the food industry. The materials obtained were studied using Fourier-transformed infrared spectroscopy (FTIR). The swelling rate of the composites was also measured. Release experiments of sorbic acid from the composite films into water were performed and the mass transfer phenomena were investigated using Fick’s law of diffusion. The antimicrobial effect was tested against Escherichia coli K12-MG1655. The results obtained indicated that the new biocomposite films could be promising antimicrobial food packaging materials.     

Process Intensification of Emulsion Polymerization in the Continuous Taylor Reactor

Summary: Process intensification is investigated by the emulsion polymerization of styrene in the continuous Taylor reactor. The result is an increase in space time yield up to a factor 200 in comparison to a semi-batch polymerization process. This is obtained by a fast emulsion polymerization with a mean residence time, which is reduced to 60 seconds. The article presented the results of the process and the economical aspects of the Taylor reactor plant.     

GD3- and O-acetylated GD3-gangliosides in the GM2 synthase-deficient mouse brain and their immunohistochemical localization

Gangliosides in the brain of the knockout mouse deficient in the activity of β1,4 N-acetylgalactosaminyl transferase (β1,4 GalNAc-T)(GM2 synthase) consisted of nearly exclusively of GM3- and GD3-gangliosides as expected from the known substrate specificity of the enzyme and in confirmation of the initial reports from two laboratories that generated the mutant mouse experimentally. The total molar amount of gangliosides was approximately 30% higher in the mutant mouse brain than that in the wild-type brain. However, contrary to the initial reports, one-fourth of total GD3-ganglioside was O-acetylated. It reacted positively with an anti-O-acetylated GD3 monoclonal antibody and disappeared with a corresponding increase in GD3-ganglioside after mild alkaline treatment. The absence of O-acetylated GD3 in the initial reports can be explained by the saponification step included in their analytical procedures. Although quantitatively much less and identification tentative, we also detected GT3 and O-acetylated GT3. Anti-GD3 and anti-O-acetylated GD3 monoclonal antibodies gave positive reactions in the brain of mutant mouse as expected from the analytical results. Either antibody barely stained wild-type brain except for immunoreactivity of GD3 in the cerebellar Purkinje cells. The distributions of GD3 and O-acetylated GD3 in the brain of mutant mouse were similar but differential localization was noted in the cerebellar Purkinje cells and cerebral cortex.     

Hexachloroantimonate(V) mit Nitroderivaten als Liganden, 3. Mitt.: Komplexe Verbindungen mit dreiwertigen Metallen

Complex compounds of trivalent metal chlorides (AlCl₃, CrCl₃, FeCl₃) are described, which had been obtained in a double complexation reaction in CCl₄ as a solvent with nitro compounds and SbCl₅:M ^III(C₆H₅NO₂) _m (SbCl₆)₃ (m=3,6),M ₂ ^III(C₆H₅NO₂)₄(SbCl₆)₄ and Al(-C₁₀H₇NO₂)₃(SbCl₆)₃. Synthesis, analytical results and i.r. spectra are discussed.     

Imine polymers containing chiral nanohoops in the backbone obtained through [2 + 2] cyclocondensation

A simple method for synthesis of polymers containing shape persistent imine macrocycles as nanohoops in the main chain is studied. It is based on the cyclocondensation reaction carried out in solution and room temperature of triphenylamine-based tetraaldehyde compounds with (R,R)-trans-1,2-diaminocyclohexane. The pristine polymer P1 bearing long alkyl groups is soluble during the synthesis but becomes insoluble after precipitation due to the strong and multiple C H/π and π-π stacking intermolecular interactions from arene–arene species and entanglement and interpenetrating of flexible alkyl groups inside of rigid macrocycle hollow. Polymer without any solubilizing groups ( P2 ) separates during the polymerization as an insoluble material. Both polymers are amorphous and have good thermal and environmental stability. They have a low surface area because discrete nanovoids introduced by macrocycles are disconnected in the amorphous polymers and non-accessible for gas adsorption. Polymers have inherent luminescent properties due to triphenylamine groups and chirality derived from (R,R)-conformation of the cyclohexane skeleton. In presence of picric acid (PA), the polymer fluorescence in solid state or suspension is strongly quenched, thus the polymers can work as efficient fluorescent probes toward nitrophenolic compounds. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2565–2573     

Asymmetric Brønsted Acid Catalyzed Substitution of Diaryl Methanols with Thiols and Alcohols for the Synthesis of Chiral Thioethers and Ethers

An enantioselective addition of thiols and alcohols to aza‐ortho‐quinone methides, starting from diaryl methanols, was developed. The asymmetric additions occur under mild reaction conditions in the presence of chiral phosphoric acids and furnish the corresponding adducts with excellent yields and enantioselectivities.     

Synthesis of Enantiopure Sulfonimidamides and Elucidation of Their Absolute Configuration by Comparison of Measured and Calculated CD Spectra and X‐Ray Crystal Structure Determination

Straightforward syntheses of enantiopure N‐benzoyl‐ and N‐tert‐butyloxycarbonyl‐protected sulfonimidamides, which can be used as building blocks in newly designed catalysts, are presented. Key synthetic step is a dynamic resolution of a racemic sulfinic acid sodium salt. All subsequent transformations proceed stereospecifically. The absolute configurations at the sulfur atoms of both sulfonimidamides were determined by comparison of measured and calculated CD spectra. An X‐ray crystal structure determination of a sulfonimidoylguanidine derivative confirmed this result.     

Microfluidics in macro-biomolecules analysis: macro inside in a nano world

Use of microfluidic devices in the life sciences and medicine has created the possibility of performing investigations at the molecular level. Moreover, microfluidic devices are also part of the technological framework that has enabled a new type of scientific information to be revealed, i.e. that based on intensive screening of complete sets of gene and protein sequences. A deeper bioanalytical perspective may provide quantitative and qualitative tools, enabling study of various diseases and, eventually, may offer support for the development of accurate and reliable methods for clinical assessment. This would open the way to molecule-based diagnostics, i.e. establish accurate diagnosis and disease prognosis based on identification and/or quantification of biomacromolecules, for example proteins or nucleic acids. Finally, the development of disposable and portable devices for molecule-based diagnosis would provide the perfect translation of the science behind life-science research into practical applications dedicated to patients and health practitioners. This review provides an analytical perspective of the impact of microfluidics on the detection and characterization of bio-macromolecules involved in pathological processes. The main features of molecule-based diagnostics and the specific requirements for the diagnostic devices are discussed. Further, the techniques currently used for testing bio-macromolecules for potential diagnostic purposes are identified, emphasizing the newest developments. Subsequently, the challenges of this type of application and the status of commercially available devices are highlighted, and future trends are noted.     

Microorganism response to atmospheric pressure helium plasma DBD treatment

The effect of an atmospheric pressure plasma dielectric barrier discharge on some microorganisms was investigated, due to the possible extent of plasma applications in controlling microbial contamination. The present investigation involved both Gram-positive and Gram-negative germs – bacteria and yeasts – treated in helium plasma (asymmetric dielectric barrier discharge) for various time durations between 25 s and 100 s. Circular growth inhibition zones were measured for two distances between the discharge electrodes, the correlations with the plasma treatment time being analyzed. Differences between the sensitivities of the four tested microorganisms to helium plasma in open atmosphere were discussed.