Stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry for trace analysis of triclosan in water sample

A simple and highly sensitive method called stir bar sorptive extraction (SBSE) and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS), which is used for the determination of trace amounts of 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan) in river water samples, is described. A stir bar coated with polydimethylsiloxane (PDMS) is added to a 10mL water sample and stirring is carried out for 120min at room temperature (25 degrees C) in a vial. Then, the PDMS stir bar is subjected to TD-GC-MS. The detection limit of triclosan is 5ngL(-1) (ppt). The method shows linearity over the calibration range (0.02-20mugL(-1)) and the correlation coefficient is higher than 0.997 for triclosan standard solution. The recovery of triclosan in river water samples ranges from 91.9 to 108.3% (RSD: 4.0-7.0%). This simple, accurate, sensitive, and selective analytical method may be used in the determination of trace amounts of triclosan in river water samples.     

Circular Dichroism Study of the Inclusion-Dissociation Behavior of Complexes between a Molecular Nanotube and Azobenzene Substituted Linear Polymers

We have investigated the inclusion properties of molecular nanotubes composed ofcrosslinked -cyclodextrin. Induced circular dichroism was used to probe theformation and dissociation of complexes between the nanotubes and azobenzenemodified linear polymers. The polymer was poly(ethylene glycol) (PEG), either withor without a hydrophobic alkyl chain.It was found that the inclusion complex betweenthe nanotubes and polymers formed at room temperature, and that the polymers dissociated from the nanotubes with increasing temperature. Further, the polymer with hydrophobic alkyl chain was bound inside the nanotube more strongly and dissociated more abruptly with increasing temperature than its hydrophilic counterpart as expected theoretically.     

Matrix effect and correction by standard addition in quantitative liquid chromatographic-mass spectrometric analysis of diarrhetic shellfish poisoning toxins

An evaluation of the feasibility of liquid chromatography-mass spectrometry (LC-MS) with atmospheric pressure ionization was made for quantitation of four diarrhetic shellfish poisoning toxins, okadaic acid, dinophysistoxin-1, pectenotoxin-6 and yessotoxin in scallops. When LC-MS was applied to the analysis of scallop extracts, large signal suppressions were observed due to coeluting substances from the column. To compensate for these matrix signal suppressions, the standard addition method was applied. First, the sample was analyzed and then the sample involving the addition of calibration standards is analyzed. Although this method requires two LC-MS runs per analysis, effective correction of quantitative errors was found.     

Supramolecular Sensor for Astringent Procyanidin C1: Fluorescent Artificial Tongue for Wine Components

An artificial tongue that detects astringent components for a comprehensive evaluation of taste has not been established to date. Herein, we first propose fluorescent polythiophene (PT) derivatives ( S1 – S3 ) modified with 3-pyridinium boronic acid as supramolecular chemosensors for wine components including astringent procyanidin C1. After numerous attempts for the synthetic conditions, more than 95 mol % of the PT unit was modified with the pyridinium boronic acid moiety. To evaluate the PT derivatives as chemosensors of the artificial tongue, qualitative and quantitative analyses were performed with four types of wine components (i.e., sweet, sour, bitter, and astringent tastes) in combination with pattern recognition models. Notably, procyanidin C1 in the actual wine sample was successfully detected in a quantitative manner. In other words, we have established an authentic artificial tongue using PT based supramolecular chemosensors.     

Synthesis and isomerization of conjugated oligomers containing azoimidazole unit

The Suzuki (for O1 – O3 ) and Stille (for O4 ) coupling polymerization of 2‐(phenylazo)imidazole bearing the benzyl protecting group at the 1‐position gave conjugated oligomers. The transformation from the neutral imidazole in the conjugated oligomer O2 , consisted of the alternating 2,5‐didecyl‐1,4‐phenylene unit, to the cationic imidazolium salt O2S was performed. Depending on the chemical structure of coupling partners, the absorption maximum of conjugated oligomers showed red shift or blue shift from that of the model compound M with the benzene ring at the 4,5‐positions. The absorption maximum wavelength of the cationic conjugated oligomer O2S showed a blue shift from that of the neutral conjugated oligomer O2 . The trans‐to‐cis photoisomerization of the azoimidazole unit in conjugated oligomers was observed by irradiating the light at 436 nm, and the conversion degree to the cis structure had a rough correlation with the maximum absorption wavelength of materials. The trans‐to‐cis photoisomerization in the film state was sluggish. On the other hand, the cis‐to‐trans thermal isomerization of the azoimidazole unit was confirmed and the absorbance returned to the initial state before the photoisomerization. The trans‐to‐cis photoisomerization of the cationic conjugated oligomer O2S required large energy, and the prolonged light irradiation might decompose the azoimidazole unit. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Positron annihilation properties of copolyimides and copolyamides with microphase‐separated structures

The positron annihilation lifetime (PAL) of a series of copolyimides and copolyamides with microphase‐separated structures was measured to investigate the effects of different hard‐segment polymers on the PAL properties of soft‐segment domains of poly(dimethyl‐siloxane) (PDMS) and poly(ethylene oxide) (PEO). The lifetime (τ₃) and intensity (I₃) of the long‐lived component are given as a function of the PDMS or PEO content for a series of copolymers, of which the density roughly obeys the additive rule except for the PDMS‐segmented copolyamides. The PDMS‐segmented copolyimides and copolyamides show much smaller I₃ values than those estimated from the additive rule. The lifetime distribution of the long‐lived component for the PDMS‐segmented copolyamides is composed of two components. The longer‐lifetime component is attributed to pure PDMS domains, and the shorter‐lifetime component is attributed to the polyamide domains, intermediate phases, and PDMS domains containing small amounts of short amide blocks. Despite the high PDMS content, the latter component is rather large. Thus, the positronium formation in the PDMS domains of the copolyimides and copolyamides is effectively reduced. This can be explained by the combination of the difference in the electron affinity of the PDMS and polyimide or polyamide segments and the incomplete phase separation. The PEO‐segmented copolyimides show much smaller I₃ values than those predicted from the additive rule. This is likely attributable to the effects of the intermediate phases. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1123–1132, 2000     

High-speed counter-current chromatography of apple procyanidins

Apple procyanidins were separated by high-speed counter-current chromatography using a type-J multilayer coil planet centrifuge. Several two-phase solvent systems with a wide range of hydrophobicities from a non-polar hexane system to polar n-butanol systems were evaluated their performance in terms of the partition coefficient and the retention of the phase. The best separation of procyanidins B and C was achieved with a two-phase solvent system composed of n-butanol-methyl tert.-butyl ether-acetonitrile-0.1% trifluoroacetic acid (2:4:3:8) using the lower phase as a mobile at a flow-rate of 1.0 ml/min.     

Aryne reaction with trifluoromethyl ketones in three modes: C-C bond cleavage, [2+2] cycloaddition and O-arylation

Trifluoromethyl ketones were found to be coupled with arynes in three modes depending upon their substitution patterns, namely C-C bond cleavage, [2+2] cycloaddition and O-arylation.     

Prompt gamma-ray analysis using cold and thermal guided neutron beams

The extraction behavior of uranium(VI), plutonium(IV) and some fission products like zirconium(IV), ruthenium(III) and europium(III) from 3.5M nitric acid with -irradiated organic phase pre-equilibratedn-dodecane solutions of dihexyl derivatives of hexanamide (DHHA), octanamide (DHOA) and decanamide (DHDA) has been investigated as a function of absorbed dose upto 184·10⁴ Gy. The results indicate that the extraction of uranium(VI) decreases gradually with dose upto 72·10⁴ Gy and becomes almost constant thereafter, while, the extraction of plutonium(IV) decreases upto a dose of 20·10⁴ Gy and then increases rapidly up to a dose of 82·10⁴ Gy indicating synergistic effects of radiolytic products formed at higher doses. Extraction of zirconium(IV) increases gradually upto a dose of 72·10⁴ Gy. Europium(III) does not get extracted with any of these amides in the entire dose range (0–184·10⁴ Gy) studied, however, ruthenium shows insignificant increase in extraction with dose. The decrease inD values noticed in the case of plutonium and zirconium after the dose of 72·10⁴ Gy which was attributed to the third phase formation and emulsification. Infrared studies confirm the final products of radiolysis as the respective amines and carboxylic acids. The degraded amide contents have been estimated by quantitative IR spectrophotometric technique. Extraction data obtained for uranium(VI) and plutonium(IV) with TBP/n-dodecane system have also been compared under similar experimental conditions.     

Surfactants having polyfluoroalkyl chains. II. Syntheses of anionic surfactants having two polyfluoroalkyl chains including a trifluoromethyl group at each tail and their flocculation-redispersion ability for dispersed magnetite particles in water

Anionic surfactants having two polyfluoroalkyl chains per molecule, i.e. the sodium salt of bis(1H, 1H, 2H,2H-heptadeca-fluorodecyl)-2-sulfosuccinate, CF₃(CF₂)₇(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₇CF₃, the sodium salt of bis(1H, 1H, 2H, 2H-tridecafluoro-octyl)-2-sulfosuccinate, CF₃(CF₂)₅(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₅CF₃, and the sodium salt of bis(1H, 1H, 2H, 2H-nonafluorohexyl)-2-sulfosuccinate, CF₃(CF₂)₃(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₃CF₃, have been prepared from maleic anhydride, the corresponding alcohols possessing a polyfluoroalkyl chain and sodium hydrogen sulfite. The flocculation and redispersion abilities of these surfactants for dispersed magnetic particles in water have been examined to investigate the effect of the chain length. It was found that this ability was enhanced by an increase in the chain length. The contact angles for water for pelleted surface-modified magnetite have been measured. In order to compare this ability and the contact angles, data for other fluorinated surfactant have been obtained. The Kraff point, the surface tension and the pNa of the aqueous surfactant solutions have also been measured.