Employing the structural diversity of nature: development of modular dipeptide-analogue ligands for ruthenium-catalyzed enantioselective transfer hydrogenation of ketones

A library of novel dipeptide-analogue ligands based on the combination of tert-butoxycarbonyl(N-Boc)-protected alpha-amino acids and chiral vicinal amino alcohols were prepared. These highly modular ligands were combined with [[RuCl(2)(p-cymene)](2)] and the resulting metal complexes were screened as catalysts for the enantioselective reduction of acetophenone under transfer hydrogenation conditions using 2-propanol as the hydrogen donor. Excellent enantioselectivity of 1-phenylethanol (up to 98 % ee) was achieved with several of the novel catalysts. Although most of the ligands contained two stereocenters, it was demonstrated that the absolute configuration of the product alcohol was determined by the configuration of the amino acid part of the ligand. Employing ligands based on L-amino acids generated S-configured products, and catalysts based on D-amino acids favored the formation of the R-configured alcohol. The combination N-Boc-L-alanine and (R)-phenylglycinol (Boc-L-Ab) or its enantiomer (N-Boc-D-alanine and (S)-phenylglycinol, Boc-D-Aa) proved to be the best ligands for the reduction process. Transfer hydrogenation of a number of aryl alkyl ketones were evaluated and excellent enantioselectivity, up to 96 % ee, was obtained.     

Analysis of beers from Brazil with synchrotron radiation total reflection X-ray fluorescence

Summary In this study the concentrations of P, S, Cl, K, Ca, Mn, Fe, Zn and Br in twenty-nine brands of national and international beers were determined by synchrotron radiation total reflection X-ray fluorescence analysis (SR-TXRF). The results were compared with the limits established by the Brazilian legislation and the nutritional values established by National Agricultural Library (NAL, USA). The measurements were performed at the X-Ray Fluorescence Beamline at Brazilian National Synchrotron Light Laboratory, in Campinas, S?o Paulo, Brazil, using a polychromatic beam for excitation. A small volume of 5 ml of beers containing an internal standard used to correct geometry effects was analyzed without pretreatment. The measuring time was 100 seconds and the detection limits obtained varied from 1 mg ^. l^-1 for Mn and Fe to 15 mg ^. l^-1 for P.     

Lupane Pentacyclic Triterpenes Isolated from Stems and Branches of Maytenus imbricata (Celastraceae)

Four lupane pentacyclic triterpenes were isolated from the hexane extract of stems and branches of Maytenus imbricata Mart. ex Reissek : 3‐oxolup‐20(30)‐en‐29‐al ( 1 ), 30‐hydroxylup‐20(29)‐en‐3‐one ( 2 ), (11α)‐11‐hydroxylup‐20(29)‐en‐3‐one ( 3 ), and (3β)‐lup‐20(30)‐ene‐3,29‐diol ( 4 ). The structural identification of 1 – 4 was achieved by ¹H‐ and ¹³C‐NMR techniques, including 2D experiments (HSQC, HMBC, and NOESY).     

Methylation of Chitosan with Iodomethane: Effect of Reaction Conditions on Chemoselectivity and Degree of Substitution

N,N,N‐trimethylchitosan (TMC) was prepared by reacting purified chitosan with iodomethane, in the presence of sodium hydroxide, water and sodium iodide, at room temperature. The reaction medium was N‐methyl‐2‐pyrrolidone. Different samples of TMC were obtained by adding to the reaction medium a fixed volume (5.5 mL) of aqueous NaOH solutions at different concentrations (15, 20, 30 and 40 wt.‐%) and carrying out the reactions for 9 or 24 h. The features observed in the ¹H and ¹³C NMR spectra of these chitosan derivatives, in respect of the chemical shift, number and relative intensity of the signals, depended strongly on the excess of NaOH and H₃CI added to the reaction medium, but when the lowest excess was employed, the characteristics of the derivative were not affected by the reaction time to the same extent. The average degree of quaternization of these N‐methylated derivatives of chitosan ranged from 10.5% to 44.8%, according to the reaction conditions. Increasing the excess of NaOH, in reactions carried out for 9 h, resulted in TMC samples with progressively higher content of trimethylated sites however, the reaction yields were correspondingly lower and O‐alkylation was favored in these cases.

¹H NMR spectrum of sample [A_X]^24h dissolved in D₂O (C_p = 10 g/L).     

Extraction of Pb(II), Cd(II), and Hg(II) from aqueous solution by nitrogen and thiol functionality grafted to silica gel measured by calorimetry

The reaction of ethylene sulfide with 3-aminopropyltrimethoxysilane gave a new silylating agent, which was anchored onto a silica surface via the sol–gel procedure. This surface displayed a chelating moiety containing nitrogen and two sulfur basic centers potentially capable of extracting cations from aqueous solutions. The process of metal extraction was followed by a batch method, and fitted to a modified Langmuir equation. The maximum adsorption capacities found were: 2.06 ± 0.01, 3.72 ± 0.02, and 5.14 ± 0.02 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The enthalpies of bending are: −1.16 ± 0.04, −3.60 ± 0.10, and −8.94 ± 0.03 kJ mol⁻¹ for Cd(II), Pb(II), and Hg(II), respectively. The Gibbs free energies of binding agree with the spontaneity of the proposed reactions between cations and basic centers.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Molecular distillation

Molecular distillation was studied for the separation of tocopherols from soya sludge, both experimentally and by simulation, under different operating conditions, with good agreement. Evaporator temperatures varied from 100°C to 160°C and feed flow rates ranged from 0.1 to 0.8 kg/h. The process pressure was maintained at 10⁻⁶ bar, the feed temperature at 50°C, the condenser temperature at 60°C, and the stirring at 350 rpm. For each process condition, samples of both streams (distillate and residue) were collected and stored at −18°C before tocopherols analyses. Owing to the differences between molecular weights and vapor pressures of free fatty acids and tocopherols, tocopherols preferentially remained in the residue at evaporator temperatures of 100°C and 120°C, whereas for higher temperatures (140°C and 160°C) and lower feed flow rate, tocopherols tended to migrate to the distillate stream.     

NMR characterization of new 10-membered-ring macrolactones and dihydrobenzophenazine-5-one, oxidized derivatives of benzo[a]phenazines

Peroxidation of the phenazine of beta-lapachone using m-ClC6H4CO3H-CH2Cl2 furnished a macrolactone with a rigid 10-membered ring, and the corresponding N-oxide, along with a dihydrobenzophenazine-5-one. All of the new compounds were fully characterized by spectroscopic methods, with the unambiguous assignment of the hydrogens and carbon NMR signals for the N-oxide, with the aid of 2-D NMR, mainly COSY, HMQC, HSQC and HMBC. For the other two compounds some signals could not be assigned owing to their own intrinsic features.     

Mössbauer study of Brazilian soapstone

Steatite mineral rocks, soapstone, have been studied by X-ray diffraction, optical microscopic analysis (modal analysis), electron probe micro analysis and Mössbauer spectroscopy for characterization, mineral percentages and chemical composition. Mössbauer spectra show both, magnetic interactions corresponding to magnetite and doublets corresponding to talc. chlorite, dolomite and tremolite. The temperature dependence of the quadrupole splitting in dolomite has been explained in terms of crystal field interaction.     

Comparative study on the determination of cephalexin in its dosage forms by spectrophotometry and HPLC with UV-vis detection

This paper discusses the spectrophotometric determination of cephalexin as the intact cephalexin or as its acid-induced degradation product. Cephalexin can be determined in the range 1 × 10^–5–18 × 10^–5 M with relative standard deviations of 5-1%. The limits of quantitation and detection were 10^–5 and 0.3 × 10^–5 M, respectively. These procedures were compared with reversed-phase HPLC determination. No interference was observed in the presence of common pharmaceutical adjuvants. The H-point standard additions method was applied in order to correct for the possible presence of the cephalexin precursor, 7-aminocephalosporanic acid; this improves the selectivity of the UV-vis spectrophotometric method.