Magnetic/Conducting Hybrid Compound Composed of 1-D Chain [Mn2Cl5(EtOH)]∞ and BEDT-TTF Stacking Layer

An assembled compound (BEDT-TTF)₂[Mn₂Cl₅(EtOH)] (1) consisting of two structural lattices of Mn(II)-Cl one-dimensional (1-D) chains and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) stacking layers was synthesized by electrochemical crystallization. Compound 1 crystallized in triclinic space group P-1 (#2) with a=13.1628(5) Å, b=20.3985(9) Å, c=7.4966(3) Å, α=98.3498(8)°, β=104.980(1)°, γ=74.602(2)°, V=1868.3(1) ų, and Z=2. The 1-D chains and the stacking layers are aligned along the c-axis of the unit cell. The 1-D chain is described as [Mn₂Cl₅(EtOH)]_∞⁻ in which two Mn(II) ions and four Cl⁻ ions form a ladder-like chain with Kagomé (cuboidal) sublattices, and the remaining Cl⁻ ion and an ethanol molecule cap the edge-positioned Mn(II) ions of the chains. The BEDT-TTF molecules are packed between the Mn-Cl chains (ac-plane), the intermolecular S·S contacts of which are approximately found in the range 3.440(2)-3.599(2) Å. The packing feature of BEDT-TTF molecules is very similar to that of (BEDT-TTF)₂ClO₄(TCE)_0.5 (TCE=1,1,2-trichloroethane) (J. Am. Chem. Soc., 105, 297 (1983)). Regarding the electronic state of each BEDT-TTF molecule, Raman spectroscopic analysis and ESR study revealed the presence of half-valence BEDT-TTF molecules (charge delocalization) in 1. Magnetic measurements clearly demonstrated that the paramagnetic spins on the 1-D chain [Mn₂Cl₅(EtOH)]_∞⁻ arrange antiferromagnetically in the low-temperature region. Additionally, 1 exhibits metallic conductivity in the temperature range 2.0-300 K (σ=21 S cm⁻¹ at 300 K and 1719 S cm⁻¹ at 2.0 K), due to the contribution of the stacked BEDT-TTFs. Consequently, these peculiarities that correspond to antiferromagnetic/metallic conductivity demonstrate the “bi-functionality” of 1.     

Convergent synthesis of the A-F ring segment of yessotoxin and adriatoxin

A convergent synthesis of the A-F ring segment of yessotoxin and adriatoxin was achieved via the intramolecular allylation of an α-chloroacetoxy ether and subsequent ring-closing metathesis.     

CFD simulation and analysis of emulsion droplet formation from straight-through microchannels

We recently proposed a technique for preparing monodisperse emulsions with a coefficient of variation below 5% from a silicon array of micrometer-sized channels perpendicular to the plate surface, named a straight-through microchannel (MC). This study involved three-dimensional computational fluid dynamics (CFD) simulations to calculate the formation of an oil-in-water (O/W) emulsion droplet from straight-through MCs with circular and elliptic cross sections. The CFD results demonstrated that the oil phase that passed through the elliptic MCs exceeding a threshold aspect ratio between 3 and 3.5 was cut off spontaneously into a small droplet with a diameter of approximately 40 microm. Sufficient space for water at the channel exit had to be maintained for successful droplet formation. The formation and shrinkage of a neck inside the channel caused an increased pressure difference inside the channel and an increased velocity value near the neck. The pressure and velocity values at the neck drastically changed, and the neck was cut off instantaneously just before the completion of droplet formation. This process was triggered by a gradually increased pressure difference between the circular neck and inflating oil phase. The findings obtained in this paper provide useful numerical and visual information about the droplet formation phenomena from the straight-through MCs. The CFD results were verified by the experimental results, showing that the CFD approach can help design a suitable channel structure.     

Solenoidal automorphisms with specifications

The specification property for solenoidal automorphisms is discussed; a solenoidal automorphism satisfies specification iff is expansive, and satisfies weak specification but not specification iff is ergodic and central spin. These are problems set up byK. Sigmund for homeomorphisms with specification. The proofs for toral case are given byD. Lind. For solenoidal case, a key ingredient in our proofs is splitting theorems on solenoidal groups with respect to described in § 2. Moreover, the following is proved: (i) If obeys specification then satisfies weak specification and is densely periodic. But the converse is not necessarily true. (ii) Every solenoidal automorphism with specification admits a Markov partition. (iii) Every ergodic solenoidal automorphism without specification does not admit Markov partitions. (iv) There exists an expansive homeomorphism with specification which has not Markov partitions.     

An iterative type I polyketide synthase PKSN catalyzes synthesis of the decaketide alternapyrone with regio-specific octa-methylation

A biosynthetic gene cluster containing five genes, alt1-5, was cloned from Alternaria solani, a causal fungus of early blight disease to tomato and potato. Homology searching indicated that the alt1, 2, and 3 genes code for cytochrome P450s and the alt4 gene for a FAD-dependent oxygenase/oxidase. The alt5 gene encodes a polyketide synthase (PKS), named PKSN, that was found to be an iterative type I complex reduced-type PKS with a C-methyltransferase domain. To identify the PKSN function, the alt5 gene was introduced into the fungal host Aspergillus oryzae under an alpha-amylase promoter. The transformant produced a polyketide compound, named alternapyrone, whose structure is shown to be 3,5-dimethyl-4-hydroxy-6-(1,3,5,7,11,13-hexamethyl-3,5,11-pentadecatrienyl)-pyran-2-one. Labeling experiments confirmed that alternapyrone is a decaketide with octa-methylation from methionine on every C(2) unit except the third unit.     

Palladium-catalyzed preparation of α-allyl esters and α,β-unsaturated esters from saturated esters via their silyl acetals

Reaction of ketene silyl acetals with allylic carbonates in the presence of palladium-phosphine catalyst in dioxane gives α-allyl esters in high yields. When the reaction is carried out with phosphine-free palladium catalyst in nitriles, α,β-unsaturated esters are obtained in good yields.     

Evaluation of prognosis in patients with old myocardial infarction--using 201Tl myocardial scintigraphy and 99mTc cardiac scintigraphy

To evaluate the prognosis in 57 patients with old myocardial infarctions, 201Tl myocardial scintigraphy and 99mTc-HSA gated blood pool scan had been done as a 5-year follow up study. We subdivided into two groups; group I (over 60 years) and group II (under 60 years). Cardiac index (CI) and right ventricular ejection fraction (RVEF) did not change significantly, however left ventricular ejection fraction (LVEF) changed significantly (p less than 0.05). Correlationship between CAG score and delta LVEF by handgrip exercise test was y = -1.34 x +3.61 (n = 44, r = -0.400, p less than 0.01). Otherwise, Tl defect ratio between first and final examination did not show the significant change in two groups. In conclusion, nuclear examination (cardiac function and myocardial blood flow) is significant to evaluate the prognosis in patients with myocardial infarction.     

Induction of a remarkable conformational change in a human telomeric sequence by the binding of naphthyridine dimer: inhibition of the elongation of a telomeric repeat by telomerase

The binding of a dimeric form of the 2-amino-1,8-naphthyridine derivative (naphthyridine dimer) to a human telomeric sequence, TTAGGG, was investigated by UV melting, CD spectra, and CSI-MS measurements. Both the 9-mer d(TTAGGGTTA) and the 15-mer d(TTAGGGTTAGGGTTA) showed apparent melting temperatures (T(m)) of 45.6 and 63.6 degrees C, respectively, in the presence of naphthyridine dimer (30 microM) in sodium cacodylate buffer (50 mM, pH 7.0) containing 100 mM NaCl. The CD spectra at 235 and 255 nm of the 9-mer increased in intensity accompanied with strong induced CDs at 285 and 340 nm upon complex formation with naphthyridine dimer. UV titration of the binding of naphthyridine dimer to the 9-mer at 320 nm showed a hypochromism of the spectra. A Scatchard plot of the data showed the presence of multiple binding sites with different association constants. Cold spray ionization mass spectrometry of the complex between naphthyridine dimer and the 9-mer clearly showed that one to three molecules of the ligand bound to the dimer duplex of the 9-mer. Telomeric repeat elongation assay showed that the binding of naphthyridine dimer to the telomeric sequence inhibits the elongation of the sequence by telomerase.     

Preparation of polymers with substituted allyl end group using dimer of α-methylvinyl monomer as addition fragmentation chain transfer agent at high temperatures

The dimerization of methyl methacrylate, ethyl methacrylate, methacrylonitrile, and α-methylstyrene to 2-substituted-1-allylic compounds [CH₂?C(X)CH₂C(CH₃)₂X] (X = COOR, C₆H₅, or CN), and methyl α-ethylacrylate to a 3-substituted-2-allylic compound [CH₃CH?C(COOCH₃)CH₂C(CH₃)(C₂H₅) COOCH₃] was carried out by catalytic chain transfer using benzylbis (dimethylglyoximato) (pyridine) cobalt (III). These dimers were then used as addition-fragmentation chain transfer agents in the polymerizations of methyl methacrylate and styrene at 80⁰C or above. Cross-dimers from methacrylic ester-α-methylstyrene and methacrylonitrile-α-methylstyrene mixtures were similarly prepared. Except for those from methyl α-ethylacrylate and methacrylonitrile, all the dimers participated in the addition-fragmentation and the copolymerization to different extents. The dimer of methyl α-ethylacrylate was actually inactive during the styrene and methyl methacrylate polymerizations. The methacrylonitrile dimer was primarily incorporated in the polymer chain through copolymerization. Among the dimer and the cross-dimers from α-methylstyrene with the other monomers, those bearing the α-methylstyrene moiety in the α-substituent [CH₂?C(X)CH₂C(CH₃)₂C₆H₅, X?COOCH₃, COOC₂H₅, and CN] are noted as highly reactive chain transfer agents. © 1994 John Wiley & Sons, Inc.