Preparation of a polyacrylonitrile/multi-walled carbon nanotubes composite by surface-initiated atom transfer radical polymerization on a stainless steel wire for solid-phase microextraction

We report on the fabrication and performances of a solid-phase microextraction (SPME) fiber based on a stainless steel wire coated with a covalently attached polyacrylonitrile (PAN)/multi-walled carbon nanotubes (MWCNTs) composite. This new coating is obtained by atom transfer radical polymerization (ATRP) of acrylonitrile mixed with MWCNTs. ATRP is initiated from 11-(2-bromo-2-methylpropionyloxy)-undecyl-phosphonic acid molecules grafted on the wire surface via the phosphonic acid group. The extraction performances of the fibers are assessed on different classes of compounds (polar, non-polar, aromatic, etc.) from water solutions by headspace extraction. The optimization of the parameters affecting the extraction efficiency of the target compounds was studied as well as the reproducibility and the repeatability of the fiber. The fibers sustain more than 200 extractions during which they remain chemically stable and maintain good performances (detection limits lower than 2 μg/l, repeatability, etc.). Considering their robustness together with their easy and inexpensive fabrication, these fibers could constitute promising alternatives to existing products.     

Structural study of acetogenins by tandem mass spectrometry under high and low collision energy

Collision‐induced dissociation experiments of seven annonaceous acetogenins were carried out under high and low collision energy conditions. Each compound was studied as protonated or deprotonated and lithium‐ or sodium‐ cationized molecules, using ElectroSpray Ionisation (ESI) with a hybrid linear trap/orbitrap mass spectrometer (LTQ‐Orbitrap®). The same ion species were studied with a Matrix‐Assisted Laser Desorption Ionisation (MALDI) tandem mass spectrometer in a high collision energy regime (1 or 2 keV). Although each of the techniques showed some limitations in the detection of functional groups, unambiguous structural identification of the acetogenins was obtained. MALDI ToF‐ToF has the advantage over ESI‐based methods to provide mass spectra rich in informative fragments which allows the confirmation of some functional groups position. By contrast, ESI‐LTQ‐Orbitrap® analysis has the advantage over MALDI that the mass spectra are relatively simple with only fragments close to the functional groups. However, this technique needs to carry out experiments both in negative and positive ionization modes. Copyright © 2010 John Wiley & Sons, Ltd.     

Enantioselective hydrogenation of indoles derivatives catalyzed by Walphos/rhodium complexes

The enantioselective hydrogenation of indole esters has been carried out efficiently in the presence of a rhodium catalyst modified by Walphos-type chiral ligands. The addition of a base can be beneficial in some catalytic conditions.     

Synthesis and properties of water-soluble gold colloids covalently derivatized with neutral polymer monolayers

Citrate-capped gold nanoparticles as well as planar gold surfaces can be efficiently grafted with a covalently attached polymer monolayer a few nanometers thick, by simple contact of the metal surface with dilute aqueous solutions of hydrophilic polymers that are end-capped with disulfide moieties, as shown by UV/vis absorption, dynamic light scattering, and surface plasmon resonance studies. The hydrophilic polymer-coated gold colloids can be freeze-dried and stored as powders that can be subsequently dissolved to yield stable aqueous dispersions, even at very large concentrations. They allow for applying filtrations, gel permeation chromatography, or centrifugation. They do not suffer from undesirable nonspecific adsorption of proteins while allowing the diffusion of small species within the hydrogel surface coating. In addition, specific properties of the original hydrophilic polymers are retained such as a lower critical solution temperature. The latter feature could be useful to enhance optical responses of functionalized gold surfaces toward interaction with various substrates.     

Design and synthesis of push-pull chromophores for second-order nonlinear optics derived from rigidified thiophene-based pi-conjugating spacers.

Two series of push-pull chromophores built around thiophene-based pi-conjugating spacers rigidified either by covalent bonds or by noncovalent intramolecular interactions have been synthesized and characterized by UV-vis spectroscopy, electric field induced second harmonic generation (EFISH) and differential scanning calorimetry. Comparison of the linear and second-order nonlinear optical properties of chromophores based on a covalently bridged dithienylethylene (DTE) spacer with those of their analogues based on open chain DTE shows that the rigidification of the spacer produces a considerable bathochromic shift of the absorption maximum together with a dramatic enhancement of the molecular quadratic hyperpolarizability (mu beta) which reaches values among the highest reported so far. A second series of NLO-phores has been derived from a 2,2'-bi(3,4-ethylenedioxythiophene) (BEDOT) pi-conjugating spacer. As indicated by X-ray and UV-vis data, rigidification of the spacer originates in that case, from noncovalent intramolecular interactions between sulfur and oxygen atoms. Again, comparison with the parent compounds based on an unsubstituted bithiophene spacer reveals a marked red shift of the absorption maximum and a large enhancement of mu beta. In an attempt to distinguish the contribution of the electronic and geometrical effects of the ethylenedioxy group, a third series of NLO-phores based on 3,4-ethylenedioxythiophene (EDOT) and 3,4-dihexyloxythiophene spacers has been synthesized. Comparison with compounds based on unsubstituted thiophene shows that, despite a red shift of lambda(max), introduction of alkoxy groups leads to a decrease of mu beta. Theoretical calculations indicate that this effect results from a decrease of the dipole moment (mu) caused by the auxiliary electron-donor alkoxy groups on the thiophene ring. In contrast, replacement of BT by BEDOT produces an increase of mu, which associated with the noncovalent rigidification of the BT system accounts for the observed enhancement of mu beta.     

First synthesis and structure of beta-ketoimine calix[4]arenes: complexation and extraction studies

The synthesis of a new series of beta-ketoimine calix[4]arene derivatives is described. The reaction of calix[4]arene or p-tert-butylcalix[4]arene with bromoacetonitrile or bromobutyronitrile afforded di-, tri-, and tetranitrile calixarene derivatives (3-8, 3a), which were then reduced into the corresponding amine (9-13, 3b). The condensation of these aminocalixarenes with acetylacetone led to six beta-ketoimine calix[4]arene derivatives (14-18, 3c) as a class of selective receptors toward transition metals. Molecular structures of 4, 7, and 17 have been determined by X-ray diffraction. The packing of 17 revealed a network of intramolecular and intermolecular hydrogen bonds. The complexation properties of receptors 15, 17, and 3c toward different metal ions have been investigated by UV-vis titrations in organic media. The stoichiometries of complexes with 17 were determined by both the mole ratio method and Job plots. These novel receptors selectively complex Cu2+, Hg2+, and Ag+. Moreover, the extraction properties of 17 toward cations have been studied by liquid-liquid extraction and atomic absorption spectrometry. Compound 17 has good affinity and selectivity toward Pb2+.     

Shear-induced morphology transition and microphase separation in a lamellar phase doped with clay particles

We report on the influence of shear on a nonionic lamellar phase of tetraethyleneglycol monododecyl ether (C12E4) in D2O containing clay particles (Laponite RD). The system was studied by means of small-angle light scattering (SALS) and small-angle neutron scattering (SANS) under shear. The SANS experiments were conducted using a H2O/D2O mixture of the respective scattering length density to selectively match the clay scattering. The rheological properties show the familiar shear thickening regime associated with the formation of multilamellar vesicles (MLVs) and a shear thinning regime at higher stresses. The variation of viscosity is less pronounced as commonly observed. In the shear thinning regime, depolarized SALS reveals an unexpectedly strong variation of the MLV size. SANS experiments using the samples with lamellar contrast reveal a change in interlamellar spacing of up to 30% at stresses that lead to MLV formation. This change is much more pronounced than the change observed, when shear suppresses thermal bilayer undulations. Microphase separation occurs, and as a consequence, the lamellar spacing decreases drastically. The coincidence of the change in lamellar spacing and the onset of MLV formation is a strong indication for a morphology-driven microphase separation.     

Solid-supported solution-phase synthesis of 4-amino-1,2,4,5-tetrahydro-2-benzazepine-3-ones

Starting from Boc-o-aminomethylphenylalanine, a solution-phase parallel synthesis of 2,4-substituted 4-amino-1,2,4,5-tetrahydro-2-benzazepine-3-ones is described. This heterocycle has two nitrogen functions, which are differentiated and can be selectively substituted. The sources of diversity are aldehydes for the R(1) position and carboxylic acids, sulfonyl chlorides, or isocyanates for the R(2) position. High-throughput synthesis and purification of this multistep synthetic sequence was accomplished using polymer-bound reagents and scavengers and liquid-liquid extraction protocols, and a small library of compounds was prepared. Polymer-bound cyanoborohydride was found to work well for the reductive amination. Scavenging of excess of amine was performed by polymer-bound benzaldehyde, and cyclization was performed in the presence of polymer-bound coupling reagent 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC). After Boc-deprotection, the second nitrogen can be acylated using carboxylic acids, sulfonylated or converted to a urea. The acylation is again performed by polymer-bound EDC. Excellent yields and purities were obtained.     

Ru(TAP)2(dppz)]2+: a DNA intercalating complex, which luminesces strongly in water and undergoes photo-induced proton-coupled electron transfer with guanosine-5'-monophosphate

The lowest excited state of [Ru(TAP)2(dppz)]2+ (TAP = 1,4,5,8-tetraazaphenanthrene, dppz = dipyrido[3,2-a:2',3'-c]phenazine) 1 is strongly luminescent, even in water, and very oxidizing. Therefore it is able to oxidise not only guanosine-5'-monophosphate (GMP), as demonstrated by laser flash photolysis, but also guanine-containing polynucleotides such as calf thymus DNA and [poly(dG-dC)]2. The luminescence quenching was found to be faster in H2O than in D2O, as is the back reaction, indicating that both processes probably proceed by proton-coupled electron transfer. These properties, that are controlled by the triplet MLCT state in which the charge has been transferred from the Ru to a TAP ligand, contrast with those of the well known [Ru(phen)2(dppz)]2+ 2.     

Thyonosides A and B, two new saponins isolated from the holothurian Thyone aurea

The structures of two saponins, thyonosides A and B, isolated from the holothurian Thyone aurea collected in Namibia, were elucidated by 1D and 2D NMR (¹H, ¹³C, ¹H-¹H COSY, ¹H-¹H J-resolved, TOCSY, HMQC, HMBC and NOESY). The two compounds have the same aglycon but different oligosaccharidic chains. Thyonoside A has a 3-O-methyl-β-d-xylopyranosyl-(1→3)-6-O-sodium sulphate-β-d-glucopyranosyl-(1→4)-β-d-quinovopyranosyl-(1→2)-4-O-sodium sulphate-β-d-xylopyranosyl chain, and thyonoside B a 3-O-methyl-β-d-xylopyranosyl-(1→4)-β-d-xylopyranosyl-(1→4)-β-d-quinovopyranosyl-(1→2)-4-O-sodium sulphate-β-d-xylopyranosyl chain. The holostane-type aglycon features an endocyclic double bond at position 7-8, a double bond at position 25-26 and a β-acetoxy group at C16.