Synthesis and characterization of nanostructured iron compounds prepared from the decomposition of iron pentacarbonyl dispersed into carbon materials with varying porosities

This work describes the production and characterization of carbon-iron nanocomposites obtained from the decomposition of iron pentacarbonyl (Fe(CO)₅) mixed with different carbon materials: a high surface area activated carbon (AC), powdered graphite (G), milled graphite (MG), and carbon black (CB). The nanocomposites were prepared either under argon or in ambient atmosphere, with a fixed ratio of Fe(CO)₅ (4.0 mL) to carbon precursor (2.0 g). The images of scanning electron microscopy and the analysis of textural properties indicated the presence of nanostructured Fe compounds homogeneously dispersed into the different classes of pores of the carbon matrices. The elemental Fe content was always larger for samples prepared in ambient atmosphere, reaching values in the range of 20–32 wt%. On the other hand, samples prepared under argon showed reduced Fe content, with values in the range 5–10 wt% for samples prepared from precursors with low surface area (G, MG, and CB) and a much higher value (~19 wt%) for samples prepared from the precursor of high surface area (AC). Mössbauer spectroscopy and X-ray diffractometry showed that the nanoparticles were mostly composed of iron oxides in the case of the samples prepared in oxygen-rich ambient atmosphere and also for the AC-derived nanocomposite prepared under argon, which is consistent with the large oxygen content of this precursor. For the other precursors, with reduced or no oxygen content, metallic iron and iron carbides were found to be the dominant phases in samples prepared under oxygen-free atmosphere. The samples prepared in ambient atmosphere and the AC-derived sample prepared under argon exhibited superparamagnetic behavior at room temperature, as revealed by temperature-dependent magnetization curves and Mössbauer spectroscopy.     

Complete maximal surfaces in static Robertson–Walker 3-spaces

We construct a large family of complete maximal surfaces in the static Robertson–Walker 3-spaces with negative base curvature. These examples provide a wide variety of non-standard foliations of such spaces by entire maximal graphs.     

Effect of aluminum on the morphological and textural properties of CuO-ZnO/H-Ferrierite

Hybrid catalysts containing CuO-ZnO or CuO-ZnO-Al₂O₃ as the metallic component and the zeolite H-ferrierite as support were prepared by both the coprecipitation-impregnation and coprecipitation-sedimentation methods. They were characterized by XRD, BET, and TEM. Aluminum was added to the metallic component, and the effects on the hybrid catalyst properties were studied. The metallic component blocked the zeolite micropore volume, and spaces were created between agglomerate particles of the first component, increasing mesopore volume. Aluminum introduction at a Cu/Zn/Al ratio of 55/30/15 favored the formation of hydrotalcite as a precursor to CuO/ZnO/Al₂O₃. In this case, small, highly dispersed particles of these oxides were obtained. In the coprecipitation-impregnation method, greater contact between the H-ferrierite zeolite and the metallic component was observed.     

Gouy wave modes: undistorted pulse focalization in a dispersive medium

Gouy wave modes are linear waves with finite energy that propagate without distortion at any phase and group velocity through a focal region in a dispersive medium. These features make them potentially useful for the onset and control of nonlinear interactions.     

Raman spectroscopy of very small Cd1−xCoxS quantum dots grown by a novel protocol: direct observation of acoustic‐optical phonon coupling

Glass‐embedded Cd_1−xCo_xS quantum dots (QDs) with mean radius of R ≈ 1.70 nm were successfully synthesized by a novel protocol on the basis of the melting‐nucleation synthesis route and herein investigated by several experimental techniques. Incorporation of Co²⁺ ions into the QD lattice was evidenced by X‐ray diffraction and magnetic force microscopy results. Optical absorption features with irregular spacing in the ligand field region confirmed that the majority of the incorporated Co²⁺ ions are under influence of a low‐symmetry crystal field located near to the Cd_1−xCo_xS QD surface. Electron paramagnetic resonance data confirmed the presence of Co²⁺ ions in a highly inhomogeneous crystal field environment identified at the interface between the hosting glass matrix (amorphous) and the crystalline QD. The acoustic‐optical phonon coupling in the Cd_1−xCo_xS QDs (x ≠ 0.000) was directly observed by Raman measurements, which have shown a high‐frequency shoulder of the longitudinal optical phonon peak. This effect is tuned by the size‐dependent sp‐d exchange interaction due to the magnetic doping, causing variations in the coupling between electrons and longitudinal optical phonon. Copyright © 2013 John Wiley & Sons, Ltd.     

EDXRF and multivariate statistical analysis of fragments from Marajoara ceramics

In this work, 102 fragments of Marajoara ceramics, belonging to the National Museum collection (Rio de Janeiro, Brazil), were analyzed using energy dispersive X‐ray fluorescence (EDXRF) and principal component analysis (PCA) in order to identify possible groups of samples that present similar behaviors or different characteristics. This information will give an important aid to a more accurate classification of these artifacts. The EDXRF measurements were carried out with a portable system developed in the Nuclear Instrumentation Laboratory consisting of an Oxford TF3005 X‐ray tube, with W anode, and an Si‐PIN XR‐100CR detector from Amptek, working at 25 kV and 100 µA, acquisition time of 600 s and a beam collimation of 2 mm. PCA applied to the X‐ray fluorescence results revealed a clear cluster separation to the samples. Copyright © 2009 John Wiley & Sons, Ltd.