Size-controllable carbon spheres doped Ni (II) for enhancing the catalytic oxidation of methanol

Ni(II)/CSs were prepared using a simple two-step hydrothermal method. The morphology and composition of the catalysts were studied with scanning electron microscope, transmission electron microscope, and X-ray diffraction. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy showed that the surface of the prepared carbon spheres was rich in hydroxyl groups, which was beneficial to remove CO intermediates, and therefore, improving the catalytic efficiency and the antipoisoning ability of the catalysts. The results of cyclic voltammetry and chronoamperometry showed that the electrocatalytic activity and stability of Ni(II)/CSs were higher than that of unloaded NiAc under alkaline environment. When the nickel content was 5 wt.%, the peak oxidation current density of methanol on Ni(II)/CSs electrocatalyst reached the maximum of 34.54 mA/cm², which was about 1.8 times that of unloaded NiAc. These results indicate that Ni(II)/CSs has potential applications in the electrocatalytic oxidation of methanol.     

多模光纤不同模式布里渊散射参数

基于射线光学和波动光学理论分析了多模光纤的布里渊散射特性,提出了确定布里渊散射角取值范围的方法;推导了阶跃型和渐变型多模光纤不同模式群布里渊频移、线宽、散射谱和散射功率的表达式.结果表明,阶跃型和渐变型多模光纤布里渊散射角的最大取值范围为全反射临界角的2倍到π;阶跃型光纤的布里渊频移、线宽、归一化峰值增益和散射功率随模式群的变化比渐变型光纤缓慢,且随着模式群编号的增加,阶跃型光纤的上述参量分别在11.084~10.932GHz、21.760~21.168 MHz、1~0.933和1.990×10-9~1.857×10-9 W范围内呈曲线下降;渐变型光纤的上述参量分别在11.064~10.969GHz、21.683~21.314MHz、1~0.957和2.052×10-9~1.965×10-9 W范围内呈直线下降.     

光栅投影相位法系统模型及标定方法

本文针对传统投影光栅相位法的光学三角法模型进行了改进,采用直入射光路并配合使用一种简便易行的标定方法,只需使用相移公式求取相位差,而不会引入与系统几何位置关系有关的量,简化了求取高度矩阵的要求。实验结果表明,新系统模型精度良好,测量误差为0.107 mm。采用该模型和标定方法可以克服传统方法系统模型的局限性,最大限度减少误差源并提高抗干扰性。     

Gold Carbenoids: Lessons Learnt from a Transmetalation Approach

Carbophilic catalysts that are based on Au^I allow a host of different nucleophiles to be added across various π systems. 1 – 3 Although many of these reactions are thought to proceed via gold carbenoids, the challenge to observe and characterize these putative intermediates has basically been unmet. 4 The current mechanistic interpretation therefore largely relies on indirect evidence and computational data, some of which are subject to debate. 5 In an attempt to fill this gap, we pursued a potential route to gold carbenoids by formal transmetalation of chromium or tungsten Fischer carbene complexes with [LAu]⁺. Whereas this transformation proceeds with exceptional ease as long as a stabilizing heteroelement is present on the carbene center, it stops half‐way in its absence. Rather unusual bimetallic arrays are formed, which allow the charge density to delocalize over several positions. The obvious difficulty of releasing an “unstabilized” gold carbenoid has potential mechanistic implications for the understanding of π‐acid catalysis in general.     

SnO_2/石墨纳米片复合电极及其在超级电容器中的应用

在电场的作用下对石墨棒进行电化学剥离,使其表面形成相互平行排列,且垂直于石墨棒基底的二维(2D)石墨纳米片阵列(GNSA).然后通过阴极还原电沉积法制备Sn O2/石墨纳米片阵列(Sn O2/GNSA)复合电极.采用场发射扫描电镜(FE-SEM)、X射线衍射(XRD)和傅里叶变换红外(FT-IR)光谱对其形貌和结构进行了表征.电化学测试表明该复合电极具有优异的超电容性能,在0.5 mol·L-1Li NO3电解质中,扫描速率为5 m V·s-1,电位窗口为1.4 V时,比电容达4015 F·m-2.由Sn O2/GNSA复合电极和相同电解质组装成的对称型超级电容器,在扫描速率为5 m V·s-1时,其电位窗口可增至1.8 V,能量密度达到0.41 Wh·m-2,循环5000圈后其比电容仍保持为初始比电容的81%.     

噻唑类缓蚀剂与青铜器表面粉状锈相互作用的理论研究

利用密度泛函(DFT)、概念DFT和自然键轨道理论(NBO)分析了3种常见的噻唑类缓蚀剂5-氨基-2-巯基-1,3,4-噻二唑(AMT)、3-氨基-5-巯基-1,2,4-三氮唑(ATA)和5-乙酰氨基-2-巯基-1,3,4-噻二唑(MAcT)及其与青铜器表面粉状锈中CuCl2作用后形成配合物X(X=Ⅰ-Ⅲ)的结构和反应性能.通过计算研究发现,AMT的缓蚀活性最强,与CuCl2之间的相互作用能最大,所形成配合物Ⅰ的二级稳定化能Eij(2)为603.37kJ·mol-1,并且配合物Ⅰ的反应活性最强,相互间形成聚合物的可能性最大.     

Synthesis of new cyclotriphosphazene derivatives bearing Schiff bases and their thermal and absorbance properties

In this study, a series of cyclotriphosphazene derivatives containing a Schiff base (3a–3d) were synthesized by the reactions of hexachlorocyclotriphosphazene (1) with bis-aryl Schiff bases ( 2a – 2d ) having different terminal groups (H, F, Cl, and Br). The products ( 3a – 3d ) were characterized by elemental and mass analyses, FT-IR, and ¹ H, ¹³ C, and ³¹ P NMR spectroscopies. Furthermore, the structure of compound 3a was also determined by X-ray crystallography. The thermal behaviors and the spectral properties of the new cyclotriphosphazene compounds ( 3a – 3d ) were investigated and the results were compared in the series.     

Biosynthesis of silver nanoparticles using Onosma sericeum Willd. and evaluation of their catalytic properties and antibacterial and cytotoxic activity

In this study, silver nanoparticle (AgNP) synthesis was carried out using Onosma sericeum Willd. aqueous extract for the first time, with a simple, economical, and green method without the need for any other organic solvent or external reducing or stabilizing agent. A variety of AgNPs, all of different particle sizes, were synthesized by controlling the silver ion concentration, extract volume, temperature, and pH. It was determined that the optimum conditions for AgNP synthesis were 1 mM AgNO3, pH 8, 25 °C, 20 g/200 mL extract, silver nitrate, and extract ratio 5:1 (v/v). The AgNPs were defined using UV-Vis spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive X-ray analysis (EDAX), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The particle size distribution and zeta potential measurements of the AgNPs were measured using the dynamic light scattering (DLS) technique. It was determined that the AgNPs with a particle size of less than 10 nm showed a higher catalytic effect in the reduction of 2-nitrobenzenamine. It was also found that these nanoparticles had a cytotoxic effect on the MCF-7 breast cancer cell line depending on dosage and time. The resulting IC50 values were between 76.63 µg/mL and 169.77 µg/mL. Furthermore, the biosynthesized AgNPs showed effective antibacterial activity against the Acinetobacter baumannii bacteria. The results of the study showed that synthesized AgNPs can have a promising role in biomedical and nanobiotechnology applications.     

MATLAB曲面绘制中的挖补方法

在MATLAB绘图中,将函数数据的某一部分换成内置变量NaN(或Inf),或者将函数数据中的NaN换成适当的实数,可分别实现绘图中的挖、补方法.并且给出一些具体的应用实例.     

茵陈、白术挥发油-β-环糊精包合物的制备工艺研究

以挥发油的包合率和包合物收率为指标,考察制备茵陈、白术挥发油-β-环糊精(β-cyclodextrin,简称β-CD)包合物的饱和溶液法、研磨法、超声法,并采用正交设计优化研磨包合工艺,筛选出其最佳条件为:挥发油与β-CDA的投料比为1∶4,β-CD与加水量的比为1∶15倍,研磨时间40 min.该条件下的包合率为85.4%,包合物收得率为93.5%.结果表明,研磨法包合茵陈、白术挥发油的包合率和收得率较高,包合物性质稳定,而且包合前后挥发油成分一致.