Elaboration and electrochemical characterization of LaZr2Cr4Ni5-based metal hydride alloys

The elaboration of LaZr₂Cr₄Ni₅-based intermetallic compound was performed by mechanical alloying from LaNi₅ and ZrCr₂ precursors and characterized as active materials of negative electrodes in nickel-metal hydride (Ni-MH) batteries. The effect of the milling duration on the phase composition was investigated. The structural properties of the formed phases were determined by X-ray diffraction and quantified from the Rietveld refinement data. The increase of the milling time up to 40 h leads to the highest abundance of the LaZr₂Cr₄Ni₅ phase, estimated at a weight content of 60.6 %, and a complete elimination of the LaNi₅ intermetallic precursor. The chronopotentiometry, cyclic voltammetry, and chronoamperometry techniques were applied to characterize the electrochemical behavior of prepared LaZr₂Cr₄Ni₅-based compounds. The maximum discharge capacity was 152 mAh g⁻¹, and a high electrochemical stability was obtained in the alkaline solution. The value of the hydrogen diffusion coefficient is equal to 2.1 × 10⁻⁸ cm² s⁻¹, reflecting an appropriate electrochemical hydrogenation kinetic in the LaZr₂Cr₄Ni₅-based compounds.

     

Exploring the chemistry of free CI3+: reactions with the weak Lewis bases PX3 (X = Cl-I), AsI3 and Et2O

What is the preferred coordination site of CI3+? Recent computational work suggested the iodine atoms of the Lewis acid CI3+ to be more electrophilic than the classically expected carbon atom, e.g. the complex with water is of type I2C-I...OH2+ and not the classically expected I3C-OH2+. If this structure is correct, one may also anticipate reactions of CI3+ as an I+ donor. Thus, we were interested in investigating the chemistry of CI3+ in the room-temperature stable salt [CI3]+[pftb](-) ([pftb](-) = [Al(OC(CF3)3)4]-) with weak nucleophiles that i) mimic water (OEt2) or ii) are electronically deactivated weak nucleophiles (PX3, X = Cl-I; AsI3). One question was: is it possible to obtain iodine-coordinated Lewis acid-base adducts of the CI3+ cation? With Et2O as a base, the cation behaves as a strong Lewis acid and cleaves the ether to give I3C-OEt, C2H4 and [H(Et2O)2]+. By contrast PX3 and AsI3 coordinate to the CI3+ cations and the adducts have classical, carbon-bound ethane-like structures, as proven by X-ray single-crystal diffraction, IR, UV-Vis and NMR spectroscopy. From variable temperature 13C NMR studies, it followed for the I3C-AsI3+ salt that the equilibrium between CI3+ and AsI3 is reversible and temperature dependent in solution. The I3C-PI3+ salt decomposes at room temperature giving PI4+ and C2I4, likely through an iodine coordinated I2C-I[dot dot dot]PI3+ intermediate. Thus CI3+ may also act as an I+ donor. All reactions are in agreement with ab initio quantum chemical calculations at the MP2/TZVPP level and assignments of experimental spectra were aided by quantum chemistry.     

A Novel Type of a Second Epoxy Bridge in Eunicellane Diterpenes: Isolation and Characterization of Massileunicellins A – C from the Gorgonian Eunicella cavolinii

Massileunicellins A ( 7 ), B ( 9 ), and C ( 11 ) – which show a novel type of a second epoxy bridge in eunicellane diterpenes – were isolated from the gorgonian Eunicella cavoliniii collected near Marseille. Structural assignments are based on NMR and MS data of these compounds and of their ketal derivatives 8 , 10 , and 12 . Negligible activity of the massileunicellins on L1210 and KB tumor cell lines, and similar results for related known compounds, cast doubt on high cytotoxicity reported for the latter by other authors.     

Stereochemistry of photoinitiated emulsion polymerization

The tacticity of poly(methyl methacrylate) (PMMA) samples made by emulsion polymerization (EP) has been determined by NMR spectroscopy at higher resolution than any previous study. When photoinitiation is employed at room temperature, the polymer obtained is highly syndiotactic and more stereoregular than that obtained in homogeneous radical polymerization under the same conditions. The percentage of racemic dyads and the length of racemic sequences vary significantly with the degree of conversion and the temperature, but not with variation of the hydrophobic or the hydrophilic part of the detergent molecules. A magnetic field of 5 kG or less accelerates the polymerization reaction and increases the polymer molecular weight when dibenzyl ketone is employed as oil-soluble photoinitiator, and has an indirect influence on the polymer tacticity. From measurements of the temperature dependence of the polymer steric composition, the difference of activation enthalphy and entropy of the meso and racemic additions have been calculated. The values do not follow the correlations from precedent literature for radical polymerization in solution if the reaction is considered a first-order Markov process. The persistence ratio p depends on the detergent and the temperature of the EP; in some cases its difference from unity exceeds the experimental error. These results are interpreted as a conformational effect of the locus of the polymerization in the first stage of the EP (when micelles are present) that favors the racemic addition more than is expected in a homologous solvent such as an alkane, e.g., at the same temperature.     

Conductance in homomorphous solvents: Tetrabutylammonium salts and alkali picrates in butyrolactone-sulfolane mixtures

Conductance measurements are reported for LiPi, NaPi, KPi, RbPi, CsPi, Bu₄NPi, Bu₄NBr, Bu₄NClO₄, Bu₄NNO₃, and Bu₄NBBu₄ at 25°C in -butyrolactone-sulfolane mixtures. In these mixtures of solvents that are practically homomorphous, isodielectic and with comparable dipole moments, the ion pair association and ionic mobilities of large ions conform to the expectations of the primitive model. Electrolytes containing lithium or sodium ions show anomalies indicating that other factors besides shape, dipole moment, and polarizability of the solvent molecules are involved in the association and transport processes of these ions.     

Comparative study of the in vitro bioactivities of Bupleurum rigidum and B. fruticescens

Decoctions of the aerial parts of either Bupleurum rigidum or B. fruticescens are equally used in certain parts of Spain for the treatment of topical and musculoskeletal inflammations. In the present paper, their phytochemical profile and pharmacological value has been compared. After chromatographic and spectral analyses we could establish the presence of rutin and absence of chlorogenic acid in B. fruticescens, whilst the contrary applies to B. rigidum, providing a means to chemically differentiate extracts and dry materials from the two species. Their free radical scavenging and antiperoxidative activities were similar, with B. fruticescens being more active overall. The infusions of both Bupleurum species also showed similar anti-inflammatory activity when tested by NF-kappaB assay (40% and 42% at 60 microg x mL(-1)), as well as in a hexosaminidase exocytosis assay (30% at 50 microg x mL(-1)). Antimigratory effects on rat melanoma B16F10 showed significant activity for both infusions, with B. rigidum twice as potent as B. fruticescens, the activity of the latter not being fully explained by its content of rutin. Taking all these results together, we can conclude that, in the selected experimental models, there exist an in vitro bioequivalence of the infusions from both species, which is in agreement with the majority of ethnopharmacological reports.     

Growth mechanism of thermally processed Cu(In,Ga)S2 precursors for printed Cu(In,Ga)(S,Se)2 solar cells

We investigate a process used for the selenisation of particle‐based precursors to prepare low‐cost Cu(In,Ga)(S,Se)₂ (CIGS) solar cells. It is suitable for high throughput with a short optimum selenisation duration of 3–5 min and employs a rapid thermal annealing system with elemental selenium vapour. Homogeneous crack‐free Cu(In,Ga)S₂ precursor films of up to 1 µm are obtained via doctor blading. The high selenium vapour pressure in the selenisation reaction chamber results in the formation of a compact Cu(In,Ga)(S,Se)₂ layer on top of a carbon‐rich underlayer. In order to investigate the phase development in the film, the selenisation process was interrupted at different stages and the samples were monitored via XRD and surface‐sensitive Raman measurements. We find the formation of a polycrystalline Cu(In,Ga)Se₂ phase already after 1 s at the target temperature of 550 °C. Furthermore, the effect of initial precursor thickness on solar cell parameters is discussed. Complete solar cells are prepared by conventional methods, leading to conversion efficiencies well above 8%. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

On the M‐essential spectra of two‐group transport equations

In this paper, we deal with the M‐essential spectra of unbounded linear operators in Banach spaces where some generalizations of earlier work are given. Furthermore, we give an application from transport theory. Copyright © 2013 John Wiley & Sons, Ltd.