Facile fabrication of networked patterns and their superior application to realize the virus immobilized networked pattern circuit

A facile route to fabricate a protein-immobilized network pattern circuit for rapid and highly sensitive diagnosis was developed via the evaporation directed impromptu patterning method and selective avian influenza virus (AIV) immobilization. The response to the 10 fg mL(-1) anti-AI antibody demonstrates that this easy and simple circuit has about 1000 times higher sensitivity compared to those of conventional approaches.     

Microfluidics assisted synthesis of well-defined spherical polymeric microcapsules and their utilization as potential encapsulants

In this article, the development of a novel technique to fabricate spherical polymeric microcapsules by utilizing microfluidic technology is presented. Atom transfer radical polymerization (ATRP) was employed to synthesize well-defined amphiphilic block copolymers. An organic polymer solution was constrained to adopt the spherical droplets in a continuous water phase at a T-junction microchannel, and the generation of the droplets was studied quantitatively. The flow conditions of two immiscible solutions were adjusted for the successful generation of the polymer droplets. The morphology of the microcapsules was examined. The efficiency of these polymer microcapsules as containers for the storage and controlled release of loaded molecules was evaluated by encapsulating the microcapsules with Congo-red dye and investigating the release performance using temperature controlled UV-VIS spectroscopy.     

Metal‐Free Hydrosilylation Polymerization by Borane Catalyst

The first example of metal‐free hydrosilylation polymerization between dienes and disilanes is developed by using a borane catalyst, B(C₆F₅)₃ to replace precious transition‐metal‐based systems. Under the easy‐to‐handle and mild conditions, a step‐growth polymerization of two readily available diene and disilane units was achieved with high degrees of polymerization. Various combinations of dienes and disilanes produced polycarbosilanes with a broad range of structures and properties.     

Effect of fuel injection location on a plasma jet assisted combustion with a backward-facing step

Non-reacting and reacting experiments on the ignition by a plasma jet (PJ) torch were performed to understand the correlation between fuel injection location and combustion characteristics in unheated Mach 2 airflow. Fuel was injected through three sonic injectors in the recirculation region behind a backward-facing step: a parallel injector at 2 mm from the bottom wall and two normal injectors at 2 and 9 mm from the step wall. In order to mitigate the combustion pressure interaction with nozzle, an isolator was installed between the nozzle and combustor. The combustion performance of normal injection was little affected by the difference of fuel injection locations. Moreover, normally injected fuel was escaped not to be held in the recirculation region despite of low fuel injection rates. This led to lower combustion performance relative to the parallel injection which provided fuel not to leave the recirculation region. In this case, the role of the recirculation region was to fully hold fuel, and the PJ torch provided hot gases as a heat source and acted as a flame-holder to ignite fuel–air mixtures. In a low temperature inflow condition, combustible regions were constrained around the bottom wall where embedded with the PJ torch. When thermal choking occurred in the combustor, it induced shock train both in the combustor and isolator. Under this unstable condition, the combustion performance of the normal injection was lower than that of the parallel injection. This is because the normal injection led most fuel into low temperature incoming air-stream.     

Hydrogen storage in LiAlH4: predictions of the crystal structures and reaction mechanisms of intermediate phases from quantum mechanics

We use the density functional theory and x-ray and neutron diffraction to investigate the crystal structures and reaction mechanisms of intermediate phases likely to be involved in decomposition of the potential hydrogen storage material LiAlH(4). First, we explore the decomposition mechanism of monoclinic LiAlH(4) into monoclinic Li(3)AlH(6) plus face-centered cubic (fcc) Al and hydrogen. We find that this reaction proceeds through a five-step mechanism with an overall activation barrier of 36.9 kcal/mol. The simulated x ray and neutron diffraction patterns from LiAlH(4) and Li(3)AlH(6) agree well with experimental data. On the other hand, the alternative decomposition of LiAlH(4) into LiAlH(2) plus H(2) is predicted to be unstable with respect to that through Li(3)AlH(6). Next, we investigate thermal decomposition of Li(3)AlH(6) into fcc LiH plus Al and hydrogen, occurring through a four-step mechanism with an activation barrier of 17.4 kcal/mol for the rate-limiting step. In the first and second steps, two Li atoms accept two H atoms from AlH(6) to form the stable Li-H-Li-H complex. Then, two sequential H(2) desorption steps are followed, which eventually result in fcc LiH plus fcc Al and hydrogen: Li(3)AlH(6)(monoclinic)-->3 LiH(fcc)+Al(fcc)+3/2 H(2) is endothermic by 15.8 kcal/mol. The dissociation energy of 15.8 kcal/mol per formula unit compares to experimental enthalpies in the range of 9.8-23.9 kcal/mol. Finally, we explore thermal decomposition of LiH, LiH(s)+Al(s)-->LiAl(s)+12H(2)(g) is endothermic by 4.6 kcal/mol. The B32 phase, which we predict as the lowest energy structure for LiAl, shows covalent bond characters in the Al-Al direction. Additionally, we determine that transformation of LiH plus Al into LiAlH is unstable with respect to transformation of LiH through LiAl.     

FBXW7-mediated ERK3 degradation regulates the proliferation of lung cancer cells

Extracellular signal-regulated kinase 3 (ERK3) is an atypical member of the mitogen-activated protein kinase (MAPK) family, members of which play essential roles in diverse cellular processes during carcinogenesis, including cell proliferation, differentiation, migration, and invasion. Unlike other MAPKs, ERK3 is an unstable protein with a short half-life. Although deubiquitination of ERK3 has been suggested to regulate the activity, its ubiquitination has not been described in the literature. Here, we report that FBXW7 (F-box and WD repeat domain-containing 7) acts as a ubiquitination E3 ligase for ERK3. Mammalian two-hybrid assay and immunoprecipitation results demonstrated that ERK3 is a novel binding partner of FBXW7. Furthermore, complex formation between ERK3 and the S-phase kinase-associated protein 1 (SKP1)-cullin 1-F-box protein (SCF) E3 ligase resulted in the destabilization of ERK3 via a ubiquitination-mediated proteasomal degradation pathway, and FBXW7 depletion restored ERK3 protein levels by inhibiting this ubiquitination. The interaction between ERK3 and FBXW7 was driven by binding between the C34D of ERK3, especially at Thr417 and Thr421, and the WD40 domain of FBXW7. A double mutant of ERK3 (Thr417 and Thr421 to alanine) abrogated FBXW7-mediated ubiquitination. Importantly, ERK3 knockdown inhibited the proliferation of lung cancer cells by regulating the G₁/S-phase transition of the cell cycle. These results show that FBXW7-mediated ERK3 destabilization suppresses lung cancer cell proliferation in vitro.Subject terms: Protein quality control, Ubiquitylation     

Theoretical Study of the Electronic States of the Rb(2) Molecule

We have calculated the electronic states of Rb(2) by multireference configuration interactions using the averaged relativistic effective small-core potential and the core-polarization potential. The potential energy curves for a large number of states dissociating into from 5s+5s up to 7s+5s asymptotic limits are calculated and the spectroscopic constants are reported. The spin-orbit effects for the states dissociating into 5p+5s and 4d+5s are calculated using the effective spin-orbit potential. The results are compared with available experimental data and other theoretical works. Copyright 2001 Academic Press.     

Experimental investigation on the self-ignition of pressurized hydrogen released by the failure of a rupture disk through tubes

Hydrogen is expected to be used as a clean energy carrier. However, when high-pressure hydrogen is suddenly released into the air through tubes, self-ignition can occur by a diffusion ignition mechanism. In this paper, the phenomena of self-ignition and flame propagation during the sudden release of high-pressure hydrogen were investigated experimentally. Experimental results show that self-ignition can occur when bursting pressure is sufficiently high in spite of the shortness of the tube. For example, self-ignition was observed at a bursting pressure as high as 23.5 MPa with 50 mm long tube. When self-ignition successfully occurs, a hydrogen jet flame is produced by the ignition. The flame is then stabilized at the tube outlet. From photodiode signals and flame images, the propagation of a flame inside the tube is confirmed and the flame is detected near the rupture disk as the bursting pressure increases. When the tube length is not long enough to produce self-ignition, a hydrogen flame is observed in the only boundary layer at the end of tube and it quenches after the flame exits the tube. Consequently, the formation of a complete flame across the tube is important to initiate self-ignition, which sustains a diffusion flame after jetting out of the tube into the air. Also, in order to establish a complete flame across the tube, it is necessary to have sufficient length such that the mixing region is generated by multi-dimensional shock–shock interactions.     

Organic Sonochemistry. Ultrasonic Acceleration of the Reaction of Dicarbonyls with Trimethylchlorosilane in the Presence of Zinc

Ultrasonic waves increase the rates and the yields of the reactions of some α-dicarbonyls towards zinc and trimethylchlorosilane to give bis(trimethylsiloxy)alkenes.