Anatase-Rutile Transition of Precipitated Titanium Oxide with Alcohol Rinsing

The effect of alcohol washing on the anatase-rutile transition of precipitated titanium oxide was investigated using X-ray powder diffraction, Fourier-transform IR spectroscopy, and thermogravimetry. Alcohol (butanol) rinsing accelerated the anatase-rutile transition of precipitated titanium oxide powder so that the onset temperature of transition decreased drastically from 800 degrees C for water-washed powder to 550 degrees C for alcohol-rinsed powder. Alternation of transition kinetics and mechanisms by rinsing media could be confirmed from the analysis of temperature and time dependence of rutile content. The attributability of the chemical state of anatase after crystallization, which contained H(2)O, OH, and organic residues, to the change of transition kinetics with alcohol rinsing will be discussed. Two mechanisms, the effect of residual organics and/or H(2)O(OH), could be suggested on the basis of analysis of the difference between chemical states of water-washed anatase and alcohol-rinsed powder. Copyright 2000 Academic Press.     

Metal-dependent regioselective oxidative coupling of 5,10,15-triarylporphyrins with DDQ-Sc(OTf)3 and formation of an oxo-quinoidal porphyrin

[reaction: see text] Regioselectivity of the oxidative coupling of 5,10,15-triarylporphyrin metal complexes with DDQ-Sc(OTf)(3) was dependent on the central metal and meso-aryl substituent. Oxo-quinoidal porphyrin was obtained from Ni(II) porphyrin under the same conditions.     

Probing buried carbon nanotubes within polymer-nanotube composite matrices by atomic force microscopy

Multi-walled carbon nanotubes (MW-CNT) inside a polyamide-6 (PA6)-MW-CNT composite were visualized by atomic force microscopy (i) in a field-assisted intermittent contact and (ii) in the tunneling (TUNA) mode. Individual buried MW-CNTs were clearly discerned within the PA6 matrix. An average diameter of 33 ± 5 nm of the MW-CNTs was determined based on field-assisted intermittent contact mode AFM images, which is consistent with the expected size of PA6-coated MW-CNTs. Single well dispersed MW-CNTs that are located in the sub-surface region of the composite were also observed in the TUNA mode. These new AFM approaches circumvent the tedious sample preparation based on ultramicrotoming required for high resolution electron microscopy studies to obtain “in-depth” morphological information and hence are expected to facilitate the analysis of CNT-based and other nanocomposites in the future.     

Dispersion of silica nano-particles in sol-gel hybrid resins for fabrication of multi-scale hybrid nanocomposite

Multi-scale hybrid nanocomposites containing both ∼15 nm silica colloids and ∼2 nm oligosiloxanes in a methacryl polymer matrix were newly designed and fabricated. Colloidal silica sols were dispersed in methacryl oligosiloxanes nano-hybrid resins synthesized by sol-gel reaction of methacryloxypropylmethoxysilane and diphenylsilanediol. On the basis of TEM and SANS analyses, it was confirmed that the silica colloids were compatibly dispersed and different sizes of colloidal silica and oligosiloxanes co-exist in the solutions. Multi-scale hybrid nanocomposites fabricated by UV and thermal curing with incorporation of silica colloids in the nano-hybrid materials show enhanced mechanical and thermal characteristics.     

Neighbouring group participation in formation of condensed azines. Formation of pyrazolo(3,4-b)pyrazines,isoxazolo(4,5-b)pyrazines and isothiazolo(5,4-b)pyridine

Pyrazine- and pyridinecarboxamidoximes with an amino, potentially tautomeric hydroxy or mercapto group inortho position could be transformed in the appropriate condensed azines. In this manner, representatives of pyrazolo(3,4-b)pyrazine, isoxazolo(4,5-b)pyrazine and isothiazolo(5,4-b)pyridine ring system were synthesized and some transformations investigated.Presented in part at the 8th International Congress of Heterocyclic Chemistry, Graz, 1981.     

Dynamics of order formation by colloidal adsorption onto a substrate studied with Brownian dynamics

Colloidal adsorption and spontaneous ordering of adsorbed particles on a substrate was simulated using a three-dimensional simulation model for colloidal dispersion system with an adsorptive surface under a specified bulk concentration, where the particle-particle and particle-substrate interactions were modeled on the DLVO theory. The key process for order formation is considered to be the adsorption of a particle that induces the transition from incomplete order to perfect order, and is found to involve a stochastic nature due to an energy barrier which must be overcome for the system to reach ordered state. Also, a model was developed to predict the energy barrier for order formation based on direct observation of the key process. Further, a model to describe the stochastic nature of the process was developed and its quantitative validity was demonstrated. Through the examination of the key process, it is concluded that the mechanism of the order formation is composed of two successive processes and the rate-determining step varies depending on the ionic strength.     

Determination of oxidized and reduced glutathione, by capillary zone electrophoresis, in Brassica juncea plants treated with copper and cadmium

A rapid method of capillary zone electrophoresis is described to determine the oxidized (GSSG) and reduced (GSH) form of glutathione in plant tissue. In order to separate both analytes in a fused-silica capillary, the pH and composition of the electrolyte solution were optimized. The electrolyte composition was 100 mmol/L, borate 25 mmol/L Tris, and 0.2% w/v metaphosphoric acid (MPA), pH 8.2. Some instrumental conditions used to run the samples were hydrostatic injection for 30 s, 30 kV applied voltage, and UV detection (185 nm) at 25 degrees C. Linearity and useful range obtained for the calibration curves were optimum, with correlation coefficients about 0.999 in the 0-120 micromol/L range. The migration time was highly reproducible, less than 5 min being afforded to run a sample. Electrolyte buffer and samples required a careful pH control for optimal separation of both analytes. This aspect constitutes a critical analytical step when acids are used in the procedure for sample preparation. Simultaneous analysis of GSH and GSSG may provide a useful tool for comparative studies of plants in order to select those species with a potential capacity for detoxification from toxic elements or those appearing promising from phytoremediation for these elements.     

Design of molecular two-photon probes for in vivo imaging. 2H-Benzo[h]chromene-2-one derivatives

2H-Benzo[h]chromene-2-one derivatives showing appreciable water solubility, significant two-photon cross sections, high photostability, cell permeability, low toxicity, and ability to be converted to a protein TP probe have been developed by incorporating all of the needed functions within a small molecule.     

Fullerenols revisited as stable radical anions

The first exhaustive purification and characterization of the much-studied "fullerenols", prepared by reaction of C(60) in toluene with an oxygenated, aqueous NaOH solution using tetrabutylammonium hydroxide as a phase transfer catalyst, has been performed. The resulting fullerenol is not simply polyhydroxylated C(60) but rather is a structurally and electronically complex C(60) radical anion with a molecular formula of Na(+)(n)[C(60)O(x)(OH)(y)](n)(-) (where n = 2-3, x = 7-9, and y = 12-15) for three different, but identical, preparations. Surprisingly, Na(+)-fullerenol is paramagnetic, exhibiting mu(B) values in aqueous solution of 1.9-2.1 B.M. at 0.5 T and 300 K and R(1) proton relaxivities of 0.55-0.77 mM(-1)s(-1) at 20 MHz and 40 degrees C, values both slightly higher than those expected for a pure S = 1/2 spin system. ESR studies (ESE-FS and 2D nutation) of frozen aqueous solutions at 1.5 and 5.0 K establish that Na(+)-fullerenol is mainly S = 1/2 with a minor, but significant, component of S = 1. Thus, this is the first report to characterize these widely studied, water-soluble fullerenols as stable radical anions. The stability of the S = 1/2 Na(+)-fullerenol radical is likely due to a highly derivatized C(60) surface that protects a cyclopentadienyl radical center on the fullerene.