Chelate synthesis of 2,2′-bipyridin-4-one

A method for the synthesis of 2,2′-bipyridin-4-one from 4-amino-4-(2-pyridyl)-but-3-en-2-onevia its diphenylboron, chelates was proposed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2071–2073, November, 1997.     

Idealized collision model for reactive scattering: Energy dependence of the cross section for CH3I + K → CH3 + Kl

The energy and temperature dependence of the reaction cross section for CH₃I + K → CH₃ + KI have been calculated using the reaction probability obtained from the idealized model of collinear, impulsive interaction between the atoms K and I and between the group CH₃ and I. Calculated values of the cross section agree very closely with the postmaximum data by Gersh and Berastein.     

Synthesis of difluorinated pyridinecarboxaldehyde via electrophilic fluorination

An efficient synthesis of novel 3,5-difluoropyridine-4-carboxaldehyde using N-fluoro-benzenesulfonimide (NSFi) is described. Difluorination was achieved through the reaction of 3,5-dihalo-1,3-dioxolane pyridine with n-butyllithium followed by N-fluorobenzenesulfonimide at −120 °C in good to high yields. Maintaining the low temperature during the transmetallation was found to be critical for the selective formation of the difluoro-susbstitution over the monofluoro one.     

A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.     

Aqueous Solubilities, Infinite Dilution Activity Coefficients and Octanol–Water Partition Coefficients of Tricyclic Analogs of Acyclovir

Solubilities of tricyclic analogs of acyclovir have been determined in water at 25, 35, and 45°C and in octanol, water-saturated octanol, and octanol-saturated water at 25°C. Octanol-water partition coefficients were determined at 25°C. Melting temperatures and molar enthalpies of fusion were measured. Activity coefficients in water, octanol, and in aqueous octanol solutions were determined and are discussed. The effect of hydrophilic and hydrophobic substituents in the tricyclic analogs on their thermodynamic properties are discussed. The standard Gibbs energy of transfer between the saturated phases were found to correlate with known values of the melting point of the solvents and the solubilities of the solute. For a number of the compounds examined, correlations between the minimum inhibitory concentration against the herpes simplex virus type 1 (HSV-1) and type 2 (HSV-2), varicella-zoster virus (VZV), thymidine kinase-deficient (TK^–) strains of VZV and were established. Detailed conclusions have been derived concerning the relationships between the structure and the thermodynamic parameters of the compounds examined.     

All-solid-state carbonate-selective electrode based on a molecular tweezer-type neutral carrier with solvent-soluble conducting polymer solid contact

Carbonate-selective membranes were prepared by incorporating a molecular tweezer-type carbonate-selective neutral carrier [N,N-dioctyl-3alpha,12alpha-bis(4-trifluoroacetylbenzyloxy)-5beta-cholan-24-amide] into a room temperature vulcanizing-type silicone rubber (3140 RTV-SR) matrix, and deposited on the planar-type electrodes (Pt containing Ag/AgCl electrodes formed on a ceramic plate) with and without an intermediary conducting polymer layer. Two types of solvent-soluble conducting polymers [poly(1-hexyl-3,4-dimethyl-2,5-pyrrolylene) or poly(3-octylthiophene-2,5-diyl)] have been examined as the solid contact material. Potentiometric properties of the resultant all-solid-state electrodes were evaluated in terms of their carbonate selectivity, response slope, potential stability and reproducibility. The sensitivity and carbonate selectivity of the SR membrane-based all-solid-state electrodes with conducting polymer solid contact were comparable to those of conventional electrodes. Experimental results also showed that the intermediary conducting polymer layer used in the all-solid-state electrodes greatly reduces the interference from dissolved oxygen.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

聚丙烯腈的加压水解

定型纤维状或无定型的聚丙烯腈在高温压力下均可用水水解,且产物中含有酰胺、酰亚胺、羧酸铵盐,经减压干燥后,铵盐部分分解成羧酸,最后的平均相对组成为:羧酸∶铵盐∶酰胺∶酰亚胺≈13∶36∶18∶33。 在我们的反应条件下,聚丙烯腈产生严重的断链现象,分子量大为降低,特别是未经喷丝成型的浆块更严重。 用阳离子交换树脂交换之后再进行分析的方法,一方面避免了滴定两种不同羧基(游离羧基、铵盐的羧基)之间的干扰,同时亦避免了通常方法测定铵盐时酰胺的干扰,因而数据更为可靠。     

An Improved HPLC Post-Column Methodology for the Identification of Free Radical Scavenging Phytochemicals in Complex Mixtures

The importance of natural antioxidants principally relates to their health-promoting properties. The discovery of new sources of established compounds or more potent compounds is a costly exercise and any technique capable of aiding this procedure would be highly significant. An approach combining chromatographic separation, component analysis and post-column identification of free radical scavenging has been reported. However, its effectiveness is dependent upon various factors and the number of samples analyzed without operator intervention is restricted. A more applicable technique using a 10% to 100% methanol with 2% acetic acid mobile phase and a citric acid-sodium citrate buffered methanolic 1,1-diphenyl-2-picrylhydrazyl free radical reagent is presented, whereby free radical scavengers can be detected within crude extracts of variable polarity without special considerations. As an illustration, acetone, 70% (aq.) methanol and acetonitrile-soluble extracts were prepared from sage (Salvia officinalis L.) for extraction of polar and non-polar radical scavengers and analyzed. Radical scavenging components were identified as carnosic, caffeic and rosmarinic acids and luteolin-7-O-glycoside. Others radical scavengers were tentatively identified as benzoic and hydroxycinnamic acid derivatives, flavonoids and diterpenoids. Through the application of this technique, carnosic acid and rosmarinic acid were identified as the principal free radical scavengers.     

H-quadrupolar coupling-based analysis of stereochemical and regiochemical memory in the Pd-catalysed allylic alkylation of iso-cinnamyl type substrates employing the chiral monophosphine ligands ‘MOP’ and ‘MAP’

The reaction of iso-cinnamyl acetate with NaC(Me)(CO₂Me)₂, catalysed by Pd-‘MOP’ (MOP=2-methoxy-2′-diphenylphosphino-1,1′-binaphthalene) is known to proceed with a regiochemical memory effect that results in the predominant generation of the branched alkylation product. The analogous reaction employing ‘MAP’ as ligand (MAP=2-N,N-dimethylamino-2′-diphenylphosphino-1,1′-binaphthalene) proceeds with ‘normal’ regioselectivity to generate predominantly the linear isomer of product. A ²H-NMR based analysis, employing quadrupolar coupling in a chiral liquid crystal matrix, has been developed to facilitate the simultaneous study of the regiochemical and stereochemical outcome of the reaction of both enantiomers of iso-cinnamyl ester substrates in ²H-labelled but racemic samples. The analysis allows the comparison of relative rates of two competing isomerisation processes occurring in the π-allyl intermediates in the Pd-catalysed reaction, one of which facilitates asymmetric induction, the other resulting in loss of regiochemical memory. It is demonstrated that the two processes are partially coupled and that this then limits the attainment of high global enantiomeric excess in the branched product to reactions that proceed with low regiochemical retention. A key factor for the observation of high regiochemical memory is found to be the nucleophilicity of the malonate anion and the electrophilicity of the Pd-π-allyl intermediate with reduction in the reactivity of either partner resulting in the onset of substantial loss of memory.